Change the key of modem Alice Gate VoIP 2 plus Wi-Fi

1. Connect to your router Globe B315s-936/938 (via Wi-Fi using the default credentials printed at the back of modem or connect directly thru LAN cable).
2. Open your web browser, and enter 192.168.254.254 in the URL address bar to open the Globe Broadband web interface/dashboard.
3. Click Login on the upper right of website interface. Type the Globe default admin username and password. Username: user and Password: @l03e1t3
4. Open WiFi settings. For 938 modem, go to Wi-Fi Settings For 936 modem, go to Settings > WLAN > WLAN Basic Settings Set the settings to: SSID: Your Desired WiFi Name Security mode: WPA/WPA2-PSK WLAN Key/WPA Pre-shared key : "Your Desired WiFi Password" SSID broadcast: optional settings if you want to set your wifi as public or hidden.
5. Click Apply and you are done.

Go to the Google play store and download any of the voip apps. Or use fb messenger. It has a voip featureas well.

Does the non wifi modem give out DHCP addresses?
Can the wifi modem be set up to receive it's IP address from DHCP?
If the answer to both these questions is Yes then that's what to do as a first step. Make sure the wifi modem DHCP service is disabled as it must NOT give out DHCP addresses.
Connect the ethernet port of the non wifi modem to one of the LAN ports of the wifi modem and NOT the DSL/WAN port. The wifi modem is not participating in any DSL connectivity at all so it's DSL light will remain off. The non wifi modem is doing the DSL duty so it's DSL light should be correctly illuminated.

Step one turn on PC directly connected to ModemsbSB6121 without Wi FI router being involved.
Step two go to Command prompt type in ipconfig (press enter)
Step three note IP address of default gateway and ip address issued to P.C.
Step four type in default gateway address into browser and log into Modem.
Step five look for DHCP Server and allocate IP addresses from at least 50 for example 192.168.0.50 starting ip lease ending ip lease 192.168.0.254
Step six connect Wi Router to P.C. via ethernet cable only - remove ModemSB6121
Step Seven shutdown and restart p.c
Step Eight go to Command prompt type in ipconfig (press enter)
Step Nine note IP address of default gateway and ip address issued to P.C.
Step Ten type in default gateway address into browser and log into Wi Fi Router
Step Eleven Change IP address on Router to 2 as example 192.168.0.2. (it has to match in that modem device would have been 192,168.0.1)
(if it was 10.0.0.1 make wi fi 10.0.0.2 make sure subnet mask is the same like 255.255.255.0)
Step twelve Change DHCP Server to off
Step Thirteen may need to set default gateway to MODEM IP address for example 192.168.0.1
Step Fourteen plug modem router into Wi Fi router may need to plug into WAN port on WI FI router .
Step Fifteen shutdown and Restart Computer
Step Sixteen go to Command prompt type in ipconfig (press enter)
Step Seventeen type in PING 192.168.0.1 (if this is modem IP address and default gateway IP addess)
All this above is to avoid IP address conflicts or mismatching
Subnet mask should be 255.255.255.0
either it uses 192.168.0.1 or it uses 10.0.0.1 make sure Wi FI router is set to different address to Modem Router.
I suspect either a clash occurs or your P.C gets a different IP range from ther WI FI DHCP server.
Happy troubleshooting !

What you need is the tp-link encryption key password
Hopefully it is displayed on the bottom of your tp link modem otherwise you will have to log into the modem from a computer and find out what the wi fi encryption key is.
Hopefully the admin user name and password is displayed on the modems case ?
otherwise open a browser on a wi fi - working pc on your network
typw in 192.168.1.1
TYpe in admin for user name
admin for password
hopefully the modem is still set on default name and password and has not been changed
Then look up wi fi settings
Wi fi security settings to find encryption key nad method used WPA or WEP ?

The password that my Iphone required was the 20 digit key located on the sticker as WPA-PSK. Hope this helps someone!

HP knows it has issues. Call them. Most of the time it is due to a setting in the computer. It comes from the factory looking for an analog connection. VOIP is digital. Call HP. Brother has issues too

1. Dear! Check your notebook wireless settings and correct it if it is necessory.

2. Chekc your wireless router settings may it need to update for your notebook.

Good Luck