Question about Black & Decker String Trimmer Cordless 12" 18V

Open Question

How do I thread the trimmer line ina reflex plus

Posted by on

1 Suggested Answer

  • 9 Answers

SOURCE: how do I rethread the

take the spool out there shood be a I hole to push the twine throu tie a not that wont come out look for dirtion or arrow to wind it leave enough to sitck thru the side where the twine cuts push the spool up and lock it

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove spool from cap on a reflex plus strimmer


Usually these trimmer spools are retained with a threaded 'knob' with serrated edges. The problem usually is that the knob won't turn - or so it seems. You will have to hold the spool itself while attempting to turn the knob off - turn the knob counter-clockwise!! Remember - righty tighty, lefty loosie! I usually need to turn the knob with a large pair of alligator pliers to get its grip broken, then I can turn it off by hand. Good luck with it!

Jun 21, 2011 | Black & Decker Garden

1 Answer

I need to feed the line back into the holes on the craftsman 17' 25cc weed trimmer. I dont know how to remove the line holder to replace


Although it is called dual line, only one line is used - except that you use both ends of the line. Cut off as much line as you think the spool will hold. Put the two ends together to find the center of the line. Some trimmers have holes to thread the lines through and others have a place to hook the bend at the middle of the line. if yours has threading holes, thread one end of the line through each hole and then pull on both ends until the bend of the center of the line won't allow any more slack. If your trimmer has the place to hook the bend, hook there and start winding the lines in the direction shown on the spool. Be sure one line is on one half of the spool and the other line on the other half. Wind both lines at the same time as smoothly as you can. When the spool is full, insert the loose ends through the trimmer head, insert the spool and pull on the strings. Hope this helps Tim

Here is a site that can help if I did not understand your question correctly:

http://www.ehow.com/how_7872475_replace-craftsman-25cc-line-trimmer.html

Apr 10, 2011 | Craftsman 25cc Gas Line Trimmer

1 Answer

LIne will not hold


this is not a threading problem.
don't hit anything that is harder than the line you are using, like tree trunk, cement curb,etc.... the trim line is thin, if you want to, you can change the line to a thicker one. that should last little longer.
also, you can take out the line sizer (cutter) from the trimmer cover.

Apr 14, 2009 | Black & Decker String Trimmer Cordless 12"...

1 Answer

How do I rethread the cutting line on a black and decker strimmer reflex plus


take the spool out there shood be a I hole to push the twine throu tie a not that wont come out look for dirtion or arrow to wind it leave enough to sitck thru the side where the twine cuts push the spool up and lock it

Jul 27, 2008 | Black & Decker String Trimmer Cordless 12"...

1 Answer

Don't know how to rethread the line


Breaking off is a normal process. Set the centre of your line in the spool and wind the two strands in to the Spool, thread and re assemble. C

May 27, 2008 | Black & Decker String Trimmer Cordless 12"...

Not finding what you are looking for?
Black & Decker String Trimmer Cordless 12" 18V Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Garden Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Nick Olsen

Level 2 Expert

178 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Black & Decker Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...