Question about Projection Televisions

2 Answers

Scenium DLP 50

As far as the pic, it is perfect. I forgot to mention that I recently (like, a week ago acutally) replaced the lamp, thinking that was the problem, but it still does it. Before I replaced the lamp, it wouldn't turn on at all, and now at least it does, but still does the blinking with the blue lights. Sometimes it works on the first try, other times it takes three or four trys.

Posted by on

  • clintsdog Aug 17, 2008

    I've dusted it. I used a whole can of decompressed air, trying not to touch anything, afraid the oil from my skin would do more damage than good. And as far as dry soldering, you've got me man. I'm not too savy when it comes to the internal parts of electrical things, thats just not my forte. To my layperson eye though, nothing appeared to be melted or disconnected. As I said before, the picture came back on after I installed this new lamp, although it would still do the blinking (5 times exactly) with the blue lights. Now though, and its been about a week since I installed the new lamp, it wont turn on again. I've run out of ideas

  • clintsdog Aug 17, 2008

    I ordered the exact same lamp. Cost more, but I didn't want to leave any room for doubt

×

2 Answers

I did check the link. The comments on the page dont sound too promising though, they all seem to be pretty doubtful about getting the problem fixed on their own sets (same as mine). I'm still looking though

Posted on Aug 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Dear,
what about dust problem. have u dedusted it..
check it by the way..
moreover, check for dry soldering or something heated up..like capacitor with uneven shape...

regards,

Posted on Aug 15, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After fixing a ballast lamp and color wheel how long would a tv last?


I have the same telly for the last six years and i only changed the lamp two weeks ago i think there a very good telly

Jan 20, 2013 | Samsung SP50L6HX 50" DLP HDTV

3 Answers

RCA scenium DLP 50''. The blue lights on the front (volume, channel, power, and options) all blink 5 times when I turn it on, but the tv doesn't turn on. It will do this anywhere from a couple of times,...


dear,
tell me, when it goes on then what about the pic on screen.
is it fussy or the perfect..
what happens if you try it again when it normally turns on.. is it still take the same time in the second attempt after sucessful turn on ..

regards,

Aug 08, 2008 | Projection Televisions

1 Answer

SAMSUNG DLP SLIM 50" AFTER I TURN IT OFF IT WONT TURN BACK ON TILL 30 TO 50 MINS LATER THE THREE LIGHTS IN THE FRONT BLINK. iT ACTS LIKE ITS GONA TURN ON BUT IT DOESNT IT JUST MAKES THE NOISE AND FLASHING...


Chris,

I had the same problem. I bought my tv at Best Buy and my warranty included a new bulb for the lamp. They only last about 2 yrs or so depending on how much you watch the tv. You can also buy replacement bulbs online that don't cost too much. BUT, you will need to replace every couple of years. The things you listed are exactly what happens when the bulb goes out. Hope this helps!

Sep 14, 2010 | Samsung 50" Slim-Depth DLP HDTV

1 Answer

I have a 50'' RCA HDTV lamp goes off and on every couple of hours


Ck the Lamp Fan if it is OK Ballast Board is what powers Lamp on. Encompass Parts Distubtion should List Parts /Prices for this set.If you need anymore help just let me know.

Mar 24, 2010 | Projection Televisions

1 Answer

My Samsung 50" DLP HDTV keeps humming when the DLP lamp comes on.


Hi, you have one of two problems, either the color wheel is going or one of the cooling fans are going, the color wheels are a very common problem in samsung dlp`s, sorry I can`t nail it to a specific part but I`d bet it`s the color wheel as they are notorious for failing in samsungs, video-tek

Mar 17, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

RCA HD50LPW175 50 in. HDTV Television


Yes I should be able to help you figure it out. First look on the rear of the set to check what the chassis number is. Should be an ATC 336 but it might be a ATC323 let me know the chassis number and we can go from there on diagnosing the problem

Feb 15, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...