My touch pad doesnt work - Kitchen Ranges

Check the drivers for the touch pad..install it again..use the below link
http://ud-pc.com/notebook/driver/Acer/Aspire_One/Touchpad_Synaptics_v.11.1.4.zip

else contact acer..your touch pad must have to be replaced(Acer Tech. Number: 1-800-426-7378)

check touch pad lock or install the touch pad diver of you machine again that u can get from support download option of toshiba website


best of luck

Step1: Try by installing Touch Pad Driver.

Step2: If it doesn't help change the Touch pad Grid.

Pharthiphan

HI,

TOUCH PAD DOESNT WORK,IF U R TECHNICIAN OR FAMILIAR WITH ELECTRONICS,SO DESEMBLE LAPTOP AND SEE WHETER STRIP OF TOUCH PAD IS CONNECTED TO MOTHERBOARD OR NOT.

TNKS

RABBANEES

samsung ultra touch camera keeps coming up with 'try again' after photo is taken.

Usually the green means that the button is pressed. Check the touch-pad buttons for dust or dirt. If they're clean, then probably need to be repaired.

Needs a new touch pad if it doesnt respond, you can check the connection between the touch pad and the pcb, but it sounds like there is an O/C on the pad.

This is what the code means.

F1 Defective touch pad or membrane Replace touch pad or membrane (usually the touch pad)* F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC)

Good Luck and Please Rate

I don't have Magic chef, however, I would try hitting cancel, unplugging the microwave and waiting a few minutes, then plugging it back in to reset it. Alternatively, you could go to your manual under troubleshoooting. I wish that I could help you more with this. Good luck to you. Please let me know if you figure this one out.

This may be a simple driver glitch. Try uninstalling the touch pad drivers from the device manager, then reboot. The machine will find the touch pad and reinstall the drivers. The touch pad either works or it doesn't, there's no in between, so if this doesn't work, then I'm afraid you'll have to replace the touch pad.