I cannot get this to record (or maybe, I can't hear it after I have recorded it). Anyway, does anyone have a manual or know of any troubleshooting tips for me to check why I cannot get it to work? Thanks for any help or advice. W in Tennessee
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The problem is with the mic you can verify it with by trying to record the sound using the sound recorder application. if you not able to record the sound.check whether mic is detected and it is not muted .sometimes mic may be muted.increase the volume of the mic by clicking the sound control option.
The error message implies that your DVD is not capable of writing DVD's, particularly DVD+R disks. Recheck the spec's on the drive; it might write to DVD-R disks, or perhaps it only burns CD's and not DVD's at all.
Unfortunately programming in Memory Resident Mode on Vista will not be supported,
however if you program your unit on an XP or 2000 machine first you will be
able to “run” your unit on Vista.
Because we are unable to program in Memory Resident Mode in a Vista environment
we are currently moving to new firmware called MWII which supports a mode
called Boot Mode. Boot Mode is very similar to Memory Resident Mode in that
when operating in Boot Mode all of your X-keys device's macros are stored in
the X-keys device's internal memory. Our MacroWorks II software is required to
write programming to an X-keys device operating in Boot Mode or to read
programming from that device.
I apologize for the inconvenience this will cause. If you have any questions
for me please email me at: Roccol@piengineering.com