Question about Xante Ilumina Digital Color Press Printer

4 Answers

Power Off/On Fatal Error : 917

During printig a paper half-way, the display panel showed (Power Off/On Fatal Error: 917). I have tried to check the back boards but to no avail. What does the code mean and any possible solutions?

Posted by on

  • AnneJo Nov 12, 2008

    My error cheat sheet says (**** sensor) Transfer belt. Where is this sensor?

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The 917 fatal error is a belt **** se sensor error. This could be caused by the belt not installed correctly or the belt at the end of its life, or the belt being torn. Please power the printer off and then reseat the transfer belt and then power the printer back on. If the error remains then I will need you to check the life remaining on the transfer belt. Also make sure the transfer belt is not torn.

Posted on Mar 24, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

917 relates to the transfer belt.
lift out the drums, and check the belt, it may be torn, ..
if not remove it and reload it, making sure the blue tabs lock right down securely...
your belt life may have expired...good luck

Posted on Dec 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 76 Answers

Probably your transfer belt is torn

Posted on Sep 25, 2013

A 917 error suggests a problem with your transfer belt

Posted on Aug 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix Fatal Error Fatal Codes:0X50 for Epson WF-2530


there is a driver update to this on there website.. http://2682220.r.msn.com/?ld=d3r7GeHDlTJrBUpqiKpMxT4jVUCUxr5V_qRawzP5W1kwg55cbcz5eg53VjPRThl_AClX5g-BdWf6mHDw2SlSJsTLfN9nJeK4phMY0-ErdgNCyKWWQgEXUUIi9nCuedGmcy6X7gtUKmemkIwZMZZFqFwJ3TIWhMol4QEau4TTcG8TFQ8ApN&u=https%3a%2f%2fwww.pcsupport4me.com%2fprinter-tech-support%2f

Nov 11, 2014 | Epson WorkForce WF-2530

1 Answer

Half panel is black half is on


The fault is related with the T'Con board itself as you assumes. But before confirming, check all the connections that goes to panel from it. Re-seat all the flat cables connected in between once and check. If you are not familiar with electronics, do not attempt to repair. Whether you suffer fatal electrical shock! Instead, contact the nearest service center.

Jan 27, 2013 | Samsung Televison & Video

1 Answer

Im only getting half a picture


most LCD sets use two boards (or one with both in it) for this, one drives half the screen and the other the other half.

Possible bad board or bad connection where the board connected to the panel===that would be the worst case as the display which is called a panel could have a issue inside which is fatal costwise.

Nov 06, 2012 | Vizio 42 in. LCD TV

2 Answers

Fatal Error 121


Hi and welcome to Fixya!
"Fatal Error" on your printer display or status monitor simply means a problem has occurred requiring action to clear. Fatal Error explanations are not usually found in the manual. You can check the list of error codes from the link below:
http://www.c8600.co.uk/index.asp?printername=C8600&menumode=0&content=errorcodes
RECOMMENDED STEPS:
First, try turning off your printer then turning it back on. If you're still getting the same error message, make sure the printer is plugged directly into the wall. Often, the issue is power-related.
If the problem persists, write down the message including the 3-digit error code number and send an email to "support@okidata.com" or call Oki Data Customer Support (1-800-654-3282) for assistance.
NOTE: If you see a series of letters and numbers scrolling across the display after the 3-digit error code, write it down and report them when calling or emailing Customer Support.

Jun 29, 2011 | OKI C5800Ldn Led Printer

1 Answer

I have a IBM 9068 Model S01,it is sometimes showing error code 18.If I tilt up the printer assembly during the printer power on it is ok.If I tilt down the printer assembly meaning to it's original...


Error 18 is a "Paper Edge Search Error".


1. Check document for damage and check it meets specs.
2. Check that Ribbon Cartridge is installed correctly.
3. Do "Form-Edge Sensor Service Check"
4. Do "Platen" adjustment.

Sensor Status Display:

1
. Start Self-Test (press and hold Start 1 on panel: then turn on printer. Keep holding button until at least "00" is displayed.
2. Use a magnet to override cover closed/open sensor to the left of the Start1 button in the indent.
3. Press Reject Off button until "4" is displayed.
4. Press Start1 button to shift to next digit.
5. Press Reject Off to display "4"
6. Display should now read "44"
7. Press Start2 button. The LED display indicates sensor status'
8. You will see changes with inserting paper or removing paper.

FORM-EDGE SERVICE CHECK:
Perform sensor status display as stated above. The sensor is located on the print head carriage on the left side.

1. The upper right vertical segment of the left LED digit is assigned to the form-edge sensor for Command "44"
With no paper the LED segment is unlit.
2. Check the sensor by inserting paper. Move the print carrier to the right to access the sensor mounted on the print carrier.
If the LED segment becomes lit when you insert the paper, and becomes unlit when you remove the paper, sensor is OK.
3. If the sensor does not work, check that the sensor cable is connected correctly. If the cable is okay, replace the following one at a time:
a. Form Edge Sensor -46H2648
b. Form Edge Sensor Cable -46H2730
c. Main Card -
1.46H2632 - Serial Interface
2.46H2634 - Parallel Interface

PLATEN ADJUSTMENT:

_1881.jpg

Mar 28, 2011 | IBM Office Equipment & Supplies

1 Answer

Fatal code 0x50


Hi, Hope this helps,I downloaded & manually Translated it from a Russian Website (I speak Fluent Russian)!!

fatal error code 10x50 Home position error. Possible causes : Foreign object, Deformation of the Main Frame, Change Lever failure, Paper jam.
Last fatal error code 20xF1 PF PID excess load error. Possible causes : PF Motor failure, PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame), Tooth skip of the PF Timing Belt, Improper tension of the PF Timing Belt, Cable disconnection, Main Board failure (Motor driver failure).
Last fatal error code 30x50 Home position error. Possible causes : Foreign object, Deformation of the Main Frame, Change Lever failure, Paper jam.
Last fatal error code 40x0A CR load position excess load error. Possible causes : CR Motor failure, CR Unit drive mechanism overload (paper jam, foreign object, Change Lever failure), Cable disconnection, Main Board failure (Motor driver failure).
Last fatal error code 50x50 Home position error. Possible causes : Foreign object, Deformation of the Main Frame, Change Lever failure, Paper jam.

Oct 10, 2010 | Epson PictureMate 500 InkJet Photo Printer

1 Answer

Display shows error code 6500. how do I fix the error


The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board. but i suggest you to first of all you can try to reset your printer -

1. Turn the printer off with the Power button (if available).
2. Disconnect the data cable from the printer.
3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in.
4. Turn the printer back on. If this works you're done, if not try the next step.

1. After confirming that the printer is powered on, open the paper output tray.
2. Open the top cover and wait until the print head moves to the center.
3. Open the inner cover and check that ink tanks are properly seated.
4. Properly seated
5. Press down on each ink tank until a click is heard.
6. Close the inner cover and top cover

if reset method not works for you then you go for the new logic board replacement

Aug 15, 2010 | Canon MP830 All-In-One Printer

2 Answers

I have a oki 9600 Fatal error 917


Replace the transfer belt unit. A 917 is a belt **** sensor error.

Jun 19, 2009 | OKI C5150n Led Printer

2 Answers

Fatal error 980 OKI C5500 printer


I had a paper jam and removed the jammed papers. The paper jam cleared and then the Fatal Error 980 appeared. OKI C5500 printer

Mar 15, 2009 | OKI C5100n Laser Printer

3 Answers

Fatal error 917 on an Oki C9600 printer. What does this mean and how can I resolve the problem. Many thanks James


A fatal error 917 means there is a problem regarding the belt **** sensor.

Usually it means the printer can't see the transfer belt rotating.

First thing to try is to remove and re install the transfer belt, if that does not work you should replace the transfer belt.

Jan 07, 2009 | OKI C9600hdn Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

4,943 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xante Office Equipment & Supplies Experts

Ottoniel

Level 2 Expert

202 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a Xante Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...