Question about Panasonic Lands Phones

1 Answer

The Panasonic cordless phone that I had a negative 12v power supply. I accidently applied a positive power and found fumes from the equipment. I opened to see that the IC which could be the rectifier has burnt. How can I repair it and what is the IC spec ? Please advise

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First of all you must understand the power interface circuit.Mainly it has two line filter coils at very much start after the DC in socket, they usually get burnet when connected to the reverse supply rail, if you have these filter coils replace them first, if do not have, just bypass them.After these coils, rectifier IC can be found, it is rectangular in shape, has four connections, looks like an SMD IC, about 5 mm at lenght , 3 mm at width, this can simply be replaced with four diodes in bridge configuration.You can easily identify its pins configuration by tracing the tracks. The connections going to the DC socket are input and interchangeable, the other side tracks are connected to the regulation section and can be identified with an electrolytic capacitor fixed directly to the connections of rectifier.The polarity identification is directly read from the capacitors polarity.Check upto this stage & email me after testing the power interface section with the model number.

Posted on Aug 09, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


make sure the base is not near strong power supply and comfirm what is feeding the cordless is not noisy too.

Jan 25, 2010 | Panasonic KX-TG5632 Phone

1 Answer


from lowes or home depot, get a (1) can of contact cleaner and (1) can of canned air.. Remove battery, spray contact cleaner in open area, .. "fumes"... headset jack, power port, keys, back, . EVERY HOLE YOU CAN FIND. let it run out of phone and shake downward to remove.It will evaporate and dry fast so use canned air (with tube) in every hole also. then massage all the keys. put in a bag , ziplock type with uncooked white rice for about 4 hours. should help.

Nov 16, 2009 | Panasonic KX-TG2740 Cordless Phone

1 Answer

Panasonic KX-TG2258 with E1 ERROR CODE

I was having that problem after cleaning the base and handset. It seems to resolve itself simply by disconnecting the power supply and possibly the phone input line for several hours. I reconnected my phone and it works again.

Apr 14, 2009 | Panasonic KX-TG2382B Cordless Phone

1 Answer

Lucent AT&T 7610 Cordless Phone power supply

It should be labeled on the side of the phone. My best guess would be AC/ to polarity, you would have to look at the drawing on the side by the jack...

Jul 27, 2008 | Lucent AT&T 7610 Cordless Phone (22063)

1 Answer


Contact the manufacture sales rep to find out where you can purchase a power supply for the country you are going in to. This is the best solution.

If you want to use a step down transformer for your present power supply, make sure it is a true transformer and not one of these solid state devices for this. The solid state ones will damage the power supply for the phone.

The other aspect for this, is that in some countries the load impedance standard is not all the same. This will effect the performance of the phone.

With cordless phones, there are regulations for the frequency bands used. Not all cordless phones are legal in different countries. Many of them have their own regulations.

Personaly, because these phones are so cheap now-a-days, I would buy a new one in the country of destination. This way, I know it will work properly and meet their regulations.

Jerry G.

Apr 08, 2008 | Panasonic KX-TG5632 Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts


Level 3 Expert

100288 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

82 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides