Question about Mitsubishi VS-60707 60" Rear Projection Television

1 Answer

Code 12 i am having code 12 issues as well, and can't find a solution. what did you find?

Posted by on

  • SixStringGod Sep 29, 2008

    same here and picture roll after a short time

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Still having problems

Posted on Aug 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the reset button on my WD-60737 tv


you have no reset button per-se. To reset the unit, unplug from AC outlet for one minute, then plug back in. If you still have some issue with it, it is important to give some clues. Are you getting error code lamps blinking. Any response from unit at all.
To read error code the lamp or lamps (LED on front of unit) may blink momentarily, then another series of blinks. you must count the blink series.

may blink once, pause then blink twice, then repeat that series. that would be a code of 12, which is no error found.

may blink 5 times, pause then blink 7 times, then repeat that series, that would be a 57 error code, meaning ballast communication problem.

There are several other error code possibilities, so it is important to be able to convey any error code in order to be most helpful.

Jan 16, 2015 | Mitsubishi Projection Televisions

1 Answer

Mitsubishi WS48413 makes a clicking sound and turns off right away


this is a V22 chassis circa 2003/2004
you could have an issue in 1 or multiple circuits. it is key if you can determine any error code. Error code is determined by blinking LEDs on front of unit after it shuts down. It will blink a certain number of times, pause then blink another certain number of times. It repeats this cycle 5 times.
12...no fault detected
21...X-Ray protect
22...short circuit protect

23...deflection circuit
Continuous flash...most likely DM circuit.

Dec 30, 2014 | Mitsubishi Projection Televisions

1 Answer

Is there and error code 12 and if so what is it please and thank you.


ERROR CODE 12 IS "NORMAL OPERATION" IF THAT IS THE CODE THAT THE TV IS GIVING YOU THEN IT THINKS THERE IS NOTHING WRONG WITH ITSELF. YOU HAVE TO CHECK FOR THE ERROR CODE ONLY AFTER THE TV FAILS. TRY TO POWER ON AND IF IT DOESN'T THEN CHECK ERROR CODE.

Dec 17, 2010 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

I have a mitsubishi wd62525 and it shuts downwith


a code 12 is nothing wrong with the tv,try
playing a dvd to see if the tv shuts down.

Aug 19, 2009 | Projection Televisions

1 Answer

3-D Appearance Mitsubishi WS-73909


12 = normal op
you will need to replace the convergence ICs
this link will show you a simillar repair on a pioneer.. I can assist with any specifics.. same idea, different part #s and disassembly

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 27, 2008 | Mitsubishi WS-73909 73" Rear Projection...

1 Answer

Fan Issue


theres 5 fans inside your Tv are you sure they are all working?

Aug 18, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

I have what appears to be a 21 code


they dont have a 21 error they do have a 12 and a 22 error code. 12 means normal no error detecteced 22 is momentary upset after reset

Aug 10, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubishi WD-62327


The error codes are all different for the various models. But your WD62327 is the VK26 chassis DLP heres the error codes and the meaning for your model. Let me know if you need more help.
12 No Error detected, check Power Supply
32 Lamp Cover is open
33 Air Filter Cover is open
34 Lamp abnormality
36 Light Engine (DMD or LAMP Fan stopped)
37 Exhaust or Lamp Ballast Fan stopped
38 Lamp temperature high
39 DMD temperature high
41 Short is detected
44 DVI cable between FMT & Engine disconnected.

May 23, 2008 | Mitsubishi WS-55907 55" Rear Projection...

2 Answers

SONY - PFM-500A2WE 16:9 42-inch Plasma fault 22-12


According to the Sony Service Manual for the PFM-500A3WU, 12 22 means either the Plasma Panel has failed or the Power Supply has failed. 12 means "warning decrease of panel high voltage" and 22 means "warning of decrease of middle panel voltage".ve had a look on other forums and someone as narrowed the 12/22 code down to the (ic102) its only outputing 5volts its something to do with the (b+ power supply)

Feb 01, 2008 | Projection Televisions

Not finding what you are looking for?
Mitsubishi VS-60707 60" Rear Projection Television Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...