Question about Logitech (980174) Headset

1 Answer

Not Resistering The Headset

When I go to the PS3 menu and try to register the headset it just shows scanning for 10+ minutes. I'm not sure if it's the headset or not.

Posted by on

1 Answer

You have to put the headset in pairing mode. It should have a solid light on the headset when it is in pairing mode

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Okay i have the mad catz 8806 mic it flashes red and blue and charges fine but i cant talk into it and cant hear anyone through it at all it beeps and i hear that.


If the headset you have is the Item No. 8860 in order to use it you have to pair it.
If you are using it on a PS3 then be sure that you have selected the headset in the PlayStation's settings.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Troubleshooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***


Hope it helps

Apr 06, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I have a mad catz mw2 8860 that was given to me how do i make it work with my system if it was being used with another? from the start i know nothing about this device


You have to pair it with your PS3 or another device through BlueTooth.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Apr 06, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

Installing mad catz ps3 bluetooth


In order to use it you have to pair it with the PS3.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Feb 27, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I cant find instructions to sync my Mad Catz PS3 Blu tooth headset


Hope it helps:


Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Jan 30, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I am unable to sync my Mad Catz bluetooth to my PS3 and I can't find my bluetooth manual. How do I sync up?


Please see the sync details below:

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Jan 28, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I tried to connect my emerson 227 bluetooth to my ps3. it tells me to press the start button and enter button on the device at the same time and wait until the screen changes.. well it never changes.. what...


Pairing the Headset with a Sony Playstation3 Entertainment System:

To pair your [EM-227] Bluetooth Headset with the Sony Playstation3 (PS3), go to the PS3 main menu, scroll to "Settings" and select.

Scroll to "Accessory Settings" and select.

Scroll to "Manage Bluetooth Devices" and select.

The menu will ask: "The Bluetooth device has not been registered. Do you want to register it?"

Select YES.

Put your [EM-227] Bluetooth Headset into discover mode (see X.XX of this manual for instructions on how to get the headset into discover mode).

Select "Start Scanning" from the PS3 menu.

Once the PS3 has discovered the [EM-227] Headset the screen will read "Select the Bluetooth device to register".

Select [EM-227].

The PS3 will ask for a passkey. Enter [0000] then press "OK".

Now press O (the PS3 circle button) to get back to the previous menu.

Scroll to "Audio Device Settings".

Change the "Input Device" to [EM-227].

Note: "Input Device" is the microphone, how others will hear you speak.

By default, the "Output Device" will now switch to [EM-227].

Note: "Output Device" is the audio, how you will hear the PS3 audio and others speaking.

If you would like to hear the PS3 audio and others speaking through your TV or Audio System, scroll to "Output Device" and switch to "System Default Device". If you would like to hear sound through the [EM-227] headset, then leave the "Output Device" setting on [EM-227].

To test your connection, speak into the headset and you will see the bars above the "Microphone Level" moving. If not, repeat the pairing process.

Press "OK" to confirm the new settings. You are now ready to use the [EM-227] Bluetooth Headset with your PS3 Entertainment System.

For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual.

Oct 06, 2010 | Samsung WEP200 Headset

1 Answer

How do i sync my mad catz blue tooth headset to my ps3?


You'll need your controller, console, and headset to do this. Make sure your headset is off before you start, then follow these simple steps.

  1. Power on the PS3 console
  2. Within the "settings" menu, press X on "Accessory Settings"
  3. Press X on the icon labeled: "Register Bluetooth Device"
  4. Scroll down and press X on the icon labeled: "Register Headset/Microphone/Headphones"
  5. Prepare the headset to be paried by holding down the main buttong for 8 seconds.
  6. Once the LED flashes blue and red (indicatin the headset is ready to be paried), press X on "Start Scanning"
  7. Once Scan is complete, the PS3 will list all Bluetooth device visisble and within range.
  8. Locate your headset ID, most likely "8860" or something similar, and press X on it's icon.
  9. Enter 0000 (four zeros) as the Pass key and hit OK.
  10. Now enjoy your synced headset!
If any part of this confuses you, you can find the manual for your headset online here. You'll need a PDF reader to view the file. There are plenty of free ones on the web, but if you don't already have one, I'd recommend this one. It's free and simple.

Oct 05, 2010 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I need the code


1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Register Bluetooth® Device."

4. Scroll down and press X on the icon labeled: "Register Headset/Microphone/

Headphones."

5. Once at the next screen, prepare the Headset to be paired with the

PS3 by holding down the K1 button for 8 seconds.

6. Once the Headset's LED indicator is alternately fl ashing Blue and

Red (indicating the Headset is ready to be paired), press X on "Start

Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices

within range.

8. Locate "8860" from the list of available devices and press X on its

icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register
completed"

If this does not work can I get the model # so I can get you more info

Good Luck an d rate 4 thumbs up for the free answer.

Sep 25, 2010 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

How do you get the ps3 to pick up the blue tooth head set


Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be ‘paired’ so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the “Settings” menu, press X on “Accessory Settings.”

3. Press X on the icon labeled: “Manage Bluetooth® Devices.”

4. Scroll down and press X on the icon labeled: “Register New Device.”

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.


6. Once the Headset’s LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on “Start Scanning.”

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate “8860” from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: “Register completed”

Trouble Shooting
Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Source: www.madcatz.com/faq

Aug 11, 2010 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

Blue tooth is not installing for the ps3


Registering
1) Go to accessory settings
2) Click on Register blue-tooth device
3) Click on Headset
4) Scan, while holding down the main power button on the headset
5) Enter your 4-digit password. The default is normally 0000
6) Done

Using
1) Go to Audio Options (under accessories)
2) Click "Connect Blue-Tooth device"
3) Change everything from "Do Not Use" to your headset name
4) Done..

Mar 31, 2009 | Mad Catz PS3 Bluetooth® Headset Wireless...

Not finding what you are looking for?
Logitech (980174) Headset Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Headsets Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Logitech Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...