The timer does not move, there is no heat, when the on button is pushed the tub turns normally. The timer was changed out with no change, Sure could use a little help. Paul
Comments:
Aug 11, 2008
- You called the problem dead on. I had checked the breaker while troubleshooting and it was not tripped. After getting your advise I took a better look. Although the breaker was not tripped the ground came out from pushing the breaker to hard. It was a $100.00 lesson for buying a timer I didn't need.
Thanks again,
Paul............
-   Breaker is not tripped. Both legs have 120v. Still same problem The timer does not move, there is no heat, when the on button is pushed the tub turns normally.
-   ccasler
Nov 28, 2008
-   The timer does not move, there is no heat, when the on button is pushed the tub turns normally.
-   ccasler
make sure you are getting a full 220v at the outlet. these symptoms are sometimes caused by one side of a dual circuit breaker in the house tripping leaving you with a partially functioning machine that seems to have power.
if you already checked this and think
it is a different problem then let me know, i will help you figure it out.
Mike
Was this helpful?
Yes
No
Popular Solutions for Magic Chef CYE4000AWW Electric
Dryer would not restart after a 50 minute session. Checked the fuse box and the washer. Both are...
(More)
Dryer would not restart after a 50 minute session. Checked the fuse box and the washer. Both are working. What next?
It wont start. I had the high temp, door switch, and other sensors checked. There was a blue wire on...
(More)
It wont start. I had the high temp, door switch, and other sensors checked. There was a blue wire on the motor that was burned in two. I repaired it
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.