Question about PC Desktops

1 Answer

Toshiba A305S6857 recently purchased in America will not connect to internet now that I am back in the UK yet while in the states i connected to read my emails Help! what am i not doing right

Posted by on

  • Trucker 110 Aug 07, 2008

    steve 6375

    connected to unsecured wireless in america and on wireless router in the uk which is connecting to laptop but will not connect to internet

  • trisport Oct 07, 2008

    I can connect to internet if ethernet from modem to linksys wireless then cord from lynksys to computer. I cannot get internet if my computer is directly connect to modem. Odd. Is Lan card bad? New Toshiba a305-s6857. please advise

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

How did you connect to the internet?
By Modem?
If so check dialling prefix number and country is not set.
otherwise give more details please.

Posted on Aug 07, 2008

  • Steve Si
    Steve Si Aug 08, 2008

    Hi Trucker

    If you are connected then you should see My Network Neighbourhood?

    Run Start - Run - type cmd and enter to open a command window. Then type ipconfig /all and check for an IP address and a DHCP address. If you get a similar result to below, then you have a proper connection.



    Ethernet adapter Wireless Network Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : D-Link AirPlus G DWL-G122 Wireless U
    SB Adapter(rev.C)
    Physical Address. . . . . . . . . : 00-1B-11-1D-66-0D
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.4
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 192.168.1.1
    Lease Obtained. . . . . . . . . . : 08 August 2008 17:32:09
    Lease Expires . . . . . . . . . . : 08 August 2008 18:32:09



    Assuming this is OK, then check your Internet Explorer options.

    Make sure you have no proxy set in Tools - Internet Options - Connections - LAN settings

    HTH

    Steve




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Restore travelmate to factory default settings


Unfortunately for Toshiba you will need the restore disks from Toshiba. You can go online and purchase the Disks.
Option 2
1 - Use your old computer to download software so you can retrieve your Windows KEY, unless there is a sticker on your computer that has it printed.
2 - Download a correponding version of windows on the internet and use your key.
3 - After install, you may have to go to toshiba website and download needed drivers.

This should work just fine.

Feb 01, 2014 | Acer America Acer TravelMate 5744Z-4603 -...

1 Answer

How to connect toshiba LX830 all in one to wired connection?


There should be an ethernet jack in the back of the unit. This is where you connect your wired internet connection.

Oct 20, 2013 | Toshiba All-in-One LX830-BT2G22 Desktop...

1 Answer

Cant get on the internet


The longer the cable, the slower the connection.

It should work with the cable as it is not "too" long.

I would try turning the modem and router off for one minute and then turning back on.

Jennifer

Dec 29, 2009 | Dell Dimension 2400 PC Desktop

1 Answer

Can not connect to internet when WJ enabled (Ultrasurf plugin)


WJ Enabled is UltraSurf.... just don't use UltraSurf for firefox. Go to Tools>>Add-ons>>UltraSurft Firefox Tool and select Disable or Uninstall...

Then use a web-based proxy.

Apr 06, 2009 | Toshiba Equium 6200M (PV1026U-01A) PC...

1 Answer

I need to know how to run my ps3 thru the optical wire to my hdtv


Before you start ensure that you read the TV instruction manual to know which resolution supports it. Do not switch on the TV and your console

You can connect your Playstation 3 to your TV in three different methods:

  1. Connecting with an AV cable
  2. Connecting with an HDMI cable
  3. Connecting with an Optical Cable


Connecting with an AV Cable:


  1. You are supplied with a Composite AV cable which would typically look like the below image
  2. Connect the AV Multi Out Connector to the socket on the back of your PS3 Console.
  3. Match the colors of the Jacks with the connectors on the TV which says "Video in".




Connecting with an HDMI Cable:

HDMI cable is not supplied with the PS3. You need to purchase it seperately. This cable would enhance the audio-video quality of your TV.

  1. Just connect one end of the connector to the HDMI OUT connector socket on the back of the console
  2. Connect the other end to the socket on the back of your TV which says HDMI IN.



Connecting with an Optical cable:

You need to purchase an Optical cable if you wish to connect your PS3 console through a digital audio device (Home theater, AV receiver etc.,). You need to connect Video ouput seperately with a help of Video output cable (HDMI, AV Cable etc.,)

  1. Connect one end of the optical cable to "Audio Out" socket on the console
  2. Connect the other end to the audio receiver.


Note: You can also connect your console to the Internet to use the Playstation 3 internet capabilities. Here's how you do it:

The Playstation 3 only supports 10BASE-T, 100BASE-TX and 1000BASE-T type networks. It needs a High speed internet connection. Do not connect it to a standard telephone connection or cables that are not supported. It might cause a malfunction or damage to the system.


Dec 11, 2008 | PC Desktops

1 Answer

Dvd cd rom drive reads code 10 on Satellite A205-S5825 laptop


http://support.microsoft.com/kb/310123 check error code 10:
1. update the driver: go the toshiba website, go to support, provide system info and look for knowledge base info related to your problem and also look for possible driver updates - post the model of your laptop and we'll help getting the page for ya!

2. http://support.microsoft.com/kb/943104/
make sure the device is enabled in windows and in the bios.
also disable any advance features (check with toshiba if you have any.. .and make sure your driver is updated before), lastly play around with the settings (make sure the driver is updated before doing this)

and remember to try one thing at a time, test, then move on to try something else.. be patient and methodic.

post back with your findings!!

Dec 06, 2008 | Gateway 700 XL PC Desktop

1 Answer

Internet problem 1)some site i go to tends to hang up then i F% for refresh and it connects to the site right away. 2) i tried to d/l updates for nero 7 using the nero 7 program it connects to the site...


About the software, by default it should connect directly to the internet but it you are using a specific proxy server then you would have to configure the way it connects to the internet. If you are sure it's direct, then you would have to repair the software by re-installing it.

With the burner, it's possible that the lens is weak. Try cleaning the lens using a lens cleaner. If it persists, try updating the driver. Every burner has a number of read and write times so the more you use it, the weaker it becomes and when it gets to it's limit, then it would not function properly again.

About the system restore, it you are even able to take your system back to the way it was when you purchased it, everything you changed will be lost. If you have a problem, try repairing your operating system.


Nov 04, 2008 | Gateway PC Desktops

1 Answer

I just purchase a computer and I'ved try to hook it up wireless to the internet and it will not connect. I have a wireless router that work fine on my old computer. The computers states that is is getting...


open up internet explorer, go to tools, internet options, connections, then tick never dial a connection and apply.

Close IE then open it up again and click refresh a few times and you should connect.

If you have security enabled i assume you have inputed the passkey to your router in the pc first

Aug 21, 2008 | Gateway PC Desktops

1 Answer

CGA5722 - Boxed in "A


can you a little bit describe what other device that you are using. maybe access point. Are you using an access point?, or switch?

Feb 15, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...