Question about Intel DG31PR Motherboard

4 Answers

Problem installing Windows XP Prof. DG31PR (BSOD)

While installing xp PROF. I get the BSOD while the installation is installing devices..STOP: 0x0000000aEvery time the same thing..

Posted by on

  • Anonymous Aug 22, 2008

    try touch the heat sink whether the processor is hot. Maybe u are using Pentium D or unsupported processor. Or u can used a supported processor borrowed from a friend and setup the windows & then update the BIOS to the latest & try install back your own processor.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem. After some experimentation, I traced it the Core 2 Duo processor that I was using. I fixed the problem by switching the CPU to single processor mode in the BIOS setting. Windows installed fine. After all the drivers and the windows updates were installed, I switched the single processor mode off.

Things are working happily ever after :-)

-K Vejju

Posted on Sep 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need at least Service Pack 2 to install Windows XP on systems with newer processors.

I had this problem because my Windows XP is SP1. I had to create a new CD with SP3.
http://support.intel.com/support/motherboards/desktop/sb/CS-028426.htm#slipstream

"Windows XP Notice:
If your desktop board includes PCI Express* capability, you must use Windows XP with Service Pack 2, which includes support for PCI Express."

When you install WinXP, install this before installing other drivers:
http://downloadcenter.intel.com/Filter_Results.aspx?strOSs=All&strTypes=All&ProductID=2839&lang=eng&OSFullName=All%20Operating%20Systems

Posted on Sep 22, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 397 Answers

This is most probably a faulty memory stick, if you are using more than one stick, try doing the install using only one stick and alternate them to see if only one is bad.
If you only have one stick of memory download the UBCD (Ultimate Boot CD) there are diagnostic tools on this CD that can test your memory, motherboard and load test your proccessor.
You can download the UBCD from here:
http://www.ultimatebootcd.com/
You will need to download the UBCD to a computer that has a CD burner and can burn a bootable disk (.iso type file)

Posted on Aug 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

Http://support.microsoft.com/kb/314063

Use F8 Safe Mode boot and uninstall the last driver you installed

Posted on Aug 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After I format my computer due for so many errors, I directly installed windows xp professional on it.Then I install ASrock driver on CD but Audio cannot be install because it prompted that HD audio device...


try DRIVERMAN OVERALL DRIVERS OR install WINDOWS 7 find out the audio divers used......then reinstall the XP prof. then install the divers through windows update or online

Nov 01, 2011 | Asrock G31M-S Motherboard

2 Answers

I need to install windos xp prof but i've lost that cd whose product key no: RV2YP-RFF8M-LQWTM-RTKHY-RMMYY. so i badly need windows xp prof & drivers for Toshiba TECRA 8,model no:PTA83L-02F014,Serial...


Check your Windows label that has the product installation code printed on it. On the label it will also have the XP version number it will be X08, or X10 or X11 etc.
You can use any Windows XP installation CD PROVIDED the CD Part No. matches the X08 or X10 or X10 version that is printed on your product label.
If you install XP using the wrong version CD then the installation process will not accept your product installation code and Windows will not install.

Dec 15, 2010 | Computers & Internet

1 Answer

I can't log on to windows. everytime i boot my computer, it can't log on but always restart by itself.


There are 2 solutions to your problem-->
1-->FORMAT your PC with the XP prof. Disc NOTE:- This will delete all the data on the drive(in which you have installed XP earlier) How to format
2-->REPAIR your PC with the XP prof. Disc NOTE:- This won't delete anything...But it will slow the speed of PC

Have a Nice Day

Oct 05, 2010 | Microsoft Windows XP Professional

1 Answer

How do i run windows xp prof service pack 3 keeps saying sawpidll cany be found


It seems that the installation of your window xp service pack 3 through the device might be corrupt please try a different alternative or you can upgrade the xp professional if you have older version.

May 09, 2010 | Computers & Internet

1 Answer

Have windows xp prof 3pack, takes over 10 to 15 minutes to get on the net. after awhile (hr to 3hrs) starts to freeze or slow down. I done it all, frag, cleaned, deleted, scanned. I have mechanic system...


if your download this prof 3pack take over 10 to 15 minutes you must becarefull to install in your computer, you better re-download through windows update again.good luck

Apr 26, 2010 | Microsoft Windows XP Professional SP2

1 Answer

Vista to windows xp prof., toshiba satellite l305-s5894


hello , friend its very easy to do that, steps are
1. insert bootable cd/dvd xp prof. cd.
2. But be cautious because the xp profsn doesnt contain the drivers for ata hard disk. so pls find on net the drivers for ata hard disk drivers, also update it in bootable xp profsnl dvd . recreate bootable dvd of xp with advanced bootable xp,
3. or find it from your friend with latest updates requirement. and do from it.
4. Boot from tht cd and start the installation.
5. once it i completed install all video, audio e.tc. drivers.
6. if you dont have that drivers pls download it from toshiba site by entering the toshiba serial no

Mar 25, 2009 | Toshiba Satellite L305-S5894 Notebook

1 Answer

Problem while installing Win XP Prof.


The prolem is with Windows Xp cd...
When i try to install through the Genuine Win XP cd then it works fine...
Ok...
So use the original softwares....

Feb 16, 2009 | Intel DG31PR Motherboard

1 Answer

H D Audio Driver fails to install


Have you checked to see if the driver is already installed, and the volume is just turned down? (Start> programs > accessories > entertainment > volume control) If so, try going into Device Manager (right click My Computer > properties > hardware > device manager) See if the sound card is showing up there as a yellow question mark or other error icon, it will stand right out. If it's there, right click, and uninstall it. Now (still in device manager) press the button that looks like a computer screen with a magnifying glass on it, that will scan for hardware changes and pick up the sound card, which windows includes the driver for automatically. If this still doesn't work, try downloading from realtek here, and installing that. Hope this helps.

Jul 17, 2008 | Microsoft Windows XP Professional With...

1 Answer

AUDIO DRIVER FOR WIN XP PROF.


make sure u have the correct audio driver for ur motherboard if all else fails try going to motherboard makers web site and downloading from there

Jan 24, 2008 | Intel SVM266A VIAP4M266A (SYNTAX SVM266A...

Not finding what you are looking for?
Intel DG31PR Motherboard Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...