Charge doen't last long. Plug it to charge, it starts charging, then it turns off and stops charging. Spoke to t-mobile. They say it's a known software issue and that i need a new phone because i'm out of warranty (sounds like planned obsolesence to me; Y2k built in to self destruct after x years ;) ). is there a software fix? If so, how to i get it?
I had the same problem, but replacing the original battery sorted it out. I also had the other software problem these phones are known for, where they suddenly switch off for no good reason. Remarkably, replacing the battery has fixed that problem, too! Don't bother looking for a Siemens battery. You can get an after-market replacement for around $20 online. You might be on to something about the planned obsolesence, though--my original charger just suddenly failed today. Fortunately an after-market replacement was pretty easy to come by.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn the scooter's power switch to the OFF position.
Connect the charger's plug to the charging port on the scooter.
Plug the charger's power cable into a power outlet.
When the charger's LED red/orange light is on, the battery is charging. Optimal charging time is 6 to 8 hours, or up to 10 hours to achieve a complete charge. The scooter manual will have the exact charging
Times recommended for your scooter.
Stop charging when the LED light is completely green.
Disconnect charger from the scooter, then from the power outlet.
Run your scooter before riding it to verify the battery charge.
Fully charge the battery to maximize playing time. However, it
is not necessary to fully charge or completely discharge the battery
each time. You can charge the battery by connecting the jukebox either
to the AC power adapter (fastest) or to a USB port on the computer. The
battery icon in the upper right corner of the screen indicates the
remaining battery charge.
Connect the USB combo cable to the AC power adapter,
and then plug the power adapter into an AC power outlet. Or, you can
connect the USB combo cable to a USB port on the computer.
Plug the combo cable into the jukebox. Make sure that the
top of the plug (the side with the arrows) is facing the same direction
as the front of the jukebox. View Picture
If you are charging your jukebox from the computer's USB
cable, turn your jukebox off. If your jukebox is on, it cannot charge
from the computer's USB cable.
Note: If you are charging your jukebox
from the AC power adapter, you can leave your jukebox on as it charges,
but it will take longer to charge.
If the jukebox is on, the power cord icon appears in the
upper right corner of the display. The keypad's backlight turns on while
the battery charges, and then turns off when the battery is fully
When your jukebox battery is finished charging, pinch the
two side buttons on the plug, and then pull the plug out of the jukebox.
Charge until the light on your charger turns green Check out my tips to see how t charge your scooter The length of time to fully charge depends on the battery usage during the day Good habit is to plug in when you go to bed and unplug when you get up Hope this helps
Hello my friend this looks like a battery problem or a bad connection between DC-IN power jack on the system board,first try to wiggle the power cord and if power LED and battery charge LED start flickering then is the DC-IN power jack`s problem ,if its not is battery problem and you should change the battery I'm waiting for your response Good luck my friend:)
Dont talk or use mobile phone when the phone is charging its battery and charge your mbbile battery for 10 hrs continusly before intinal use Only Charge your mobile when it shows " LOW BATTERY " Dont over charge your mobile Use the mobile to talk only when the network signal is high else use sms facility to communicate Use only original charger to charge the battery
I called and spoke to HTC ..apaprently there are issues with some of the handsets .. and its power related ... the best this is to do 2 things to solve any number of issues....
A: Get a replacment battery, and recharge it fully without turning the phone on. So plug it in and charge it until the white pulsating light is fully lit and not 'breathing' ..as they say. Once fully charged then turn on your phone...
B: Once on ... 'hardware' reset it - (you turn on the phone, holding the volume down button, and the hang up button and pressing the 'software reset button, at the same time)
Should solve it ... IF it dosent .. and your getting the same issues after battery replacment, software and hardware resets ...you've basically got a 'hardware' issue with the phone in which case you need a replacment or repair... (make sure your phone is insured)
Hope that helps folks...
My phone eventually stopped charging ...nothing, no power so i sent it back for a replacment which im waiting for to arrive...