Question about HP OfficeJet 6110 All-In-One InkJet Printer

2 Answers

Broken Glass Hi, Recently the glass on my HP6110xi broke. It cracked in half and there did not appear to be any chards. We have removed the glass. In the process a marker (120-468-01 Cavity #14) fell out. I can get a new glass cut for the printer but how do we realign the marker?

Posted by on

  • 1 more comment 
  • marge22030 Aug 07, 2008

    it is about 9in long,3/4 in wide has 2 ears about 7in apart. is dark I would call it black with a white strip about 1/2in wide. id on part LOT 120-468-01 cavity #14 it was found between the scanner bulb and the cover wedged in looking like a paper jam. but no paper gets to that side of the scanner unless it is placed on the right side of the manual scan glass as u look at it from the front of the printer. I hope that sheds enough light on the part

  • marge22030 Aug 10, 2008

    No we have not fixed it yet. Any help would be appreciated. Thanks Jim & Marge

  • Sarah McDonald
    Sarah McDonald May 11, 2010

    When you say marker - what does it look like? Was it attached to the scanner bulb itself?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

No way, buy a new one.

Posted on Feb 24, 2015

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Hello,

Your add caught my attention because the glass on my 6110 printer broke.

Is this special glass?

I was aftraid I wouldn't be able to use the scanner anymore.

HP not real cooperative on replacing glass.

Posted on Aug 09, 2008

  • Jo-Anne Aug 09, 2008

    Hello,



    If you have not solved this yet. Put a comment up and I will take a photo of mine for you.



    There is another long re-set process to try if you get the black band in and it still jams. There are mirrors and the lense in the scanner . These need to be cleaned to function properly as well. If you have the top off of the printer, make sure you clean the underside of the glass really well (no streaks) before you put it back together.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace a broken driver side mirror on a 2010 mitsubishi galant?


You don't say if it's just the glass mirror that's broke or is the housing cracked as well.
If it's just the glass mirror, it's held in place by double-faced adhesive tape. You can buy a replacement from a dealer or on-line. To get the old one lose, heat the glass with a hair dryer while pulling on the glass with a hooked tool.

Mar 16, 2015 | Mitsubishi Cars & Trucks

1 Answer

I removed the broken glass and I guess the tinted glass below is the lcd and it is cracked but the phone was working before?


you probably broke it when you were taking it off. It has happened to me, now you need to get a replacement which is pretty expensive. ill suggest better get a used phone from craiglist, itllbe cheaper than the lcd.

Oct 09, 2014 | Samsung Cell Phones

1 Answer

I broke the glass of my lg 55le8500 tv, can i buy one new and replace it ??? The image works perfect, but the glass is broken ???


All y'all are wrong. It can be fixed. This is one of the only lcd with an actual GLASS front on top of the panel. I cracked mine and got it replaced for about $300

Mar 01, 2011 | LG INFINIA 55LE8500 LED HDTV

3 Answers

My lens is cracked on my flip cam, how do i fix it?


They aren't too hard to open up and take apart. There's a glass piece the covers the actual lens and I'm guessing that is what broke. Once the flip is in pieces you can remove the glass piece and it will operate fine without it. If you want to replace it, you can either get a broken flip and use it for parts, but there's a pretty sticky, tough ring of tape holding that glass piece in place. You could also try a very clear piece of plexiglass and cut it to size. Haven't tried that one myself, but it may work.

Apr 15, 2010 | Pure Digital Flip Video Ultra Camcorder

1 Answer

Euro-Pro glass dish to 7qt oval slow cooker cracked in half!


All glass has a shelf life! Really, it true! Glass will have stress fractures that can give way over time and result in breakage...even if you can't see them. Sometimes, the glass will fracture from improper handling. Buy my most likely guess, from your surprise reaction, is that the glass just broke! Try to find a replacement by contacting the mfg.

Nov 09, 2009 | Euro-Pro KC271LC Slow Cooker

1 Answer

Broken glass top on my Maytag Schott Clean (upper


u have to replace the whole top and its about 400 to 500 dollars just for the part cheaper to buy new

Mar 20, 2009 | Maytag MER6772 Gemini Electric Kitchen...

1 Answer

Microwave door glass broken


Here is the web page and phone number

http://www.haierindia.com/#

They are in New Delhi
Call them for the part

Please leave feedback

Feb 13, 2009 | Haier MWG100214TW 1000 Watts Microwave...

1 Answer

I have recently cracked the glass stove top, if I continue to use it will I sustain more damage and how much will it cost to replace it? We have a Bosch 30x24 glass smooth top with four burners electric....


hi gud day,much better to replae the new one compare to buy the glass top only coz the price of the glass is expensive or little diif for the new one.or if the broken glass is not appected to other burner its ok to use the other burner untill to u want to use.tnx

Feb 01, 2009 | Cooktops

1 Answer

A Broken Stove


whats the entire model number?? and you cracked the main top glass assy??? ill look up tha part for you, not a teribly hard job, but depending on glass may be expensive

Nov 16, 2008 | Frigidaire FEF366 Electric Kitchen Range

3 Answers

CRACKED


The Stress of impact on the imaging forming unit that is directly behind the projection lens has a flat glass surface. If it is cracked the stress cracks would project with any image because they are on the same plane as the image

Nov 22, 2007 | BenQ MP610 Multimedia Projector

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...