Question about HP LaserJet 4250dtn Printer

1 Answer

HP LJ4250dtn 49.5F11 Service Error

HP LJ4250dtn intermittent 49.5F11 Service Error. Please advise.

Posted by on

  • Anonymous Sep 05, 2008

    When trying to print remotely this error message pops up on the printer 

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 87 Answers

Hello,

49.xxxx error occurs when the printer does not understand the Print Job Language. Following could be the reason:

  • Faulty Network Cable/Port
  • Corrupt Driver
  • Firmware of the printer and the Jetdirect Interface.
  • Corrupt file.
  • Corrupt Print job.
  • Less memory or corrupt memory DIMM
Hence to start with, please let me know when do you get the error. Is it when you powercycle the printer.
Please perform the following:
  • Upgrade the firmware of the printer and the jetdirect card.
  • Change the driver and install the UPD drivers.
Let me know the next update...

- Nikhil

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a HP LJ4250dtn it is leaving black streaks down left and right sides of pages...looks like shadow of what is actually on the page.is this a drum or roller issue?


Most likely a drum cartridge. The fuser unit is good for 225,000 pages as is the transfer roller. The drum is good for 10,000 pages.

Dec 06, 2010 | HP LaserJet 4250dtn Printer

1 Answer

Error Message: Pump Motor Stalled. Please advise


Try partial reset and semi full reset of the printer, this is error message is a hardware error, if the issue is still not resolved contact HP, they would replace the printer if it is under warranty.

Sep 28, 2009 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Scanner error 6 for hp color laserjet 2840


After the hp color laserjet has finnished initiallizing it gives me error code 6

Dec 07, 2008 | HP LaserJet 3050 All-In-One Printer

1 Answer

Error code: 49.2F9D


ok, go to the link to fix your problem--
https://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1158526
Thanks

Nov 27, 2008 | HP LaserJet P3005 Printer

1 Answer

Hp 2420 error 49 3c1a


Hello,

If the printer is displaying 49.xx error message, followng the following document

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00280149&jumpid=reg_R1002_USEN

Upgrading the firmware should resolve the issue.

Please let me know one you perform the above upgrade.

- Nikhil

Nov 20, 2008 | HP LaserJet 2420 Printer

2 Answers

Printer is showing a system error of oxc19ac3ff ink system failure and will not print receive faxes or copy please advise


I had the same problem & found the solution of HP's website. It solved the problem.

HP Website & solution:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00489814&dlc=en&product=1153494

Solution one: Reset the product
Use the instructions below to resolve the issue by restarting the product.
  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer.
Solution two: Service the product If you have completed all the steps listed above and are still experiencing a problem, service the product.

Aug 14, 2008 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

My HP laserjet 5 was showing erro 80 Service 011E. I took out the Jetdirect 400N Card. Error went away and it started working. When I put the card back, the error 80 reapears. I don't use this printer on a...


Leave the card out, no harm, just no network.
If card is fried, more likely will cause damage if you don't remove it.

If you want network connectivity, these cards can be found on ebay for as little as $10

Jul 03, 2008 | HP Printers & Copiers

Not finding what you are looking for?
HP LaserJet 4250dtn Printer Logo

7,534 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...