Question about Konica Minolta bizhub C250 All-In-One Laser Printer

2 Answers

Not receiving faxes

I can send faxes but i can't receive any I keep getting error code R18

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

R18 means that your memory is full. Very strange. Go into the user box, file document, system user box, memory rx to delete all of the old faxes. This worked for me.

Posted on Sep 24, 2009

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

R18 is a network/IP address-based error.

Try turning off the network settings, rebooting and then re-entering the IP address.

Without actually standing in front of the MFP the true reason is difficult to find out. I do know that an R-18 is network/IP-based.

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error light is flashing, can't figure out why, no code


I know this was posted a long time ago but for what it's worth. The error codes are probably turned off. I can tell you how to turn on the error codes if this is still a problem. please let me know.

Dec 05, 2013 | Canon LaserCLASS Fax 710 Printer

1 Answer

We keep getting an error code 344* when we are trying to transmit a fax. What can we do to fix this?


Error 344 means :-

The remote machine has failed to respond to a fax command from the product because the connection is interrupted.
The remote user has pressed the Stop button while the remote machine was receiving.
Under rare conditions, incompatibility between the two machines can cause the remote machine to simply abandon the call.

Solutions :-
  1. Attempt to send the fax again when telephone-line conditions have improved.
  2. If the fax session was using error correction, disable ECM.
To disable ECM Press :-
  1. Press Setup .
  2. Press the Down arrow (c00326489.gif ) repeatedly until Advanced Fax Setup displays.
  3. Press OK .
  4. Press the Down arrow (c00326489.gif ) until Error Correction Mode displays.
  5. Press OK .
  6. Press the Right arrow (> ) until either OFF or ON displays.
  7. Press OK .
  8. Send another fax to verify that the ECM is enabled or disabled.
Check the Phone Cable connected with the printer.
Make sure the Cable should be connected to line 1 port at the back of the printer and it should be going directly from the printer to the wall jack and not to the Serj protector.

Try to print a fax test page.
  1. On the control panel of the product, press the Setup button (c01361401.gif ).
  2. Press the Right Arrow button (c01185072.jpg ) to select Tools , and then press OK .
  3. Press the Right Arrow button (c01185072.jpg ) to select Run Fax Test , and then press OK . The product displays the test results on the control panel display and prints the Fax Test Report.
Now Do this :-
  1. Send a one page black and white text fax to 1-888-hpfaxme (1-888-473-2963).
  2. When your fax is received by the HP Test Fax Service, we will generate a return fax to you within five minutes confirming that we received your fax. This verifies that you can both send and receive a fax with your fax machine.
If you do not receive a return fax within 5-7 minutes, there may be a problem with the setup of your fax machine. Consult the user manual that came with the product for proper setup and configuration. Try the above steps and let me know if it works for you.

May 10, 2010 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

Cant send fax


Go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set. Make sure the phone wire which you insert in fax machine getting proper dial tone and getting out going calling facility.
Have a nice day and do not forget to rate please...!

Mar 17, 2010 | Samsung SF-565PR/XST Printer

1 Answer

I need assistance with fax error codes # 322 and # 358. What do they mean?


Error code 322- There was a communication error with the receiving fax machine due to poor telephone line conditions.
Solution
Set the receiving machine to receive at a slower transmission speed
If the session fails after sending several pages of a large document, resend the document as several smaller documents.
Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error code 358--
The remote user pressed the Stop key,
The remote machine encountered a system problem such as no paper or a paper jam.
Try
Configure the local fax machine to use a slower reception speed.
Disable ECM mode on your machine.
Try sending a fax to another location.

Mar 03, 2010 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Just wondering on how to set up so u can get faxes from all area codes not just one


You will automatically receive faxes from anyone with a compatible fax anywhere in the world. You may be confusing receiving as you had to enter your area code in setup to send faxes. That does not keep you from receiving (or sending) anywhere you like.

Aug 11, 2009 | Lexmark X5495 All-in-One &USB...

1 Answer

Error codes 283 and 232 in received Faxes


basically error 232 indicates that a communication failure has occurred between the two machines
Following these steps may help resolving your issue

1. Make sure that the phone cord is plugged directly from the wall jack into the back port of the fax machine that is marked "Line" or "To Wall Jack", or that has a wall-jack symbol.
2. Verify that the line interface unit (LIU) (the box that the phone cord plugs into) is seated fully into the back of the fax.
3. Remove any other device from the line such as splitters, credit card machines, or telephone answering machines, and retry the fax communication.
4. Try sending and receiving faxes on a different fax line.
5.Try using a different telephone cord.
6. Have the phone company test your line for static or noise problems.
7. Disable Error Correction Mode (ECM) if the same error occurs repeatedly.

Hope this helps.
thx

Jun 02, 2009 | HP LaserJet M1522nf Multifunction Printer...

1 Answer

Receiving error 388. Can receive faxes but won't connect with other fax machines when trying to send


Hi,

The reason for the error code:
4e5e48b.jpg Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Please Click here and follow the instructions to resolve the issue.

May 21, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Receiver Errors on LaserJet 3150 all in one fax


Sounds like its a problem in the other end, if the machine can send and receviving faxes.

Check your phone lines from the wall to fax and ask the sender to do the same.

Nov 21, 2008 | HP LaserJet 3150 All-In-One Printer

1 Answer

Printer can't send or receive faxes


Same problem here - I got it work:

- Error Correction: off
- V34: off

(both Menu -> Fax-Setup - All Faxes)

- detect-dial-tone: off

(Menu -> Fax Setup - Fax Send setup - detect dial tone)

:-) Stefan

Aug 30, 2008 | HP LaserJet 3055 All-In-One Printer

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

729 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...