Instruction manual I have a scanmaker 5800 I need to copy some slides but don't know how. I cannot find any software in my files. do i need software or can i just plug it into my compute. I have xp I also need an instruction manual. Ron Hermansen [email protected]

Have you downloaded the latest version of the software from http://support.microtek.com/product_dtl_2.phtml?prod_id=38 Hope his helps.

There is no official driver for this specific scanner. I suggest you to use the Win XP version (here is an official link for download) and before run the installation file right click on the installation file and at the properties section check for windows xp compatibility. Hit aplly and try the installation. At most of the cases this tip works.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

download the software drivers here

http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/MICROTEK/MICROTEK-Scanner-ScanMaker-5800-Driver-593.shtml

if this info was useful please vote for me

Install fexplorer in phone memory. Then look in c drive of phone, you will find a file called mmcstore. Copy this file to yor computer and open it with notepad. At the end of this file yo will find your memory card password.

Thanks for using FixYa. Please rate the answer.

though i need to know the os platform u r using..
considering that u r using win xp..

howevr, alongwid the company, there will b a list of such site n driver downloadlinks if u search by the model name on a search engine like google..
downloadthem onto a location; if the driver is in a zip format, unzip it,if itzin .exe form, just run it; if done manually it'll ask for the correctdriver and location; relocate the path and a.inf file (wat it'll askfor)..
try downloading..

http://driverscollection.com/?H=ScanMaker%203840&By=Microtek

but always better to consult ur system admin/vendor....

You need the following; install the nokia 5800 sync software in your pc.If you don't have the C.D go online to nokia.com and download the software for your phone make. Make sure the computer make supports the software( you can know this by reading the instructions manual or by going to the nokia download website)
It should'nt be a problem

try to download new driver software to scanner I think the driver is corrupted.

You should be able to download Microtek manuals & support at www.retrevo.com. If they can't help you, please let me know.

I just downloaded the CD for my Microtek ScanMaker 4800 from Driverscollection.com. I'm sure you can either download the correct one from them for your scanner, but if not, try the 4800 version. It came complete with the driver and the controller software, though it might not have any third party software with it. Seems to me it was about 49MB in size. The filename was SW576bml.zip. Their file ID was 19703. Seems like a good site for driver downloads.

This link should have user manual etc. http://www.microtekusa.com/ but unfortunately the site is down at the moment - try again later. on the singapore (east asia) site http://www.microtek.com.sg/Product.php?Product=Detail&P_Id=117&Kword=scanmaker%20i900&Select=All&FirstData=0#F-B nothing obvious based on your problem, but at least it means they still acknowledge the product and that they have to support it. maybe you can spot something yourself as well. If no luck with the US website then go to microtek.com and complain to any of the other sites. Their customer service should help. If no joy from this please post again, someone might know the software. Hope this helps :)