Question about Marantz CD Players

1 Answer

Marantz: Rereading ..... error

My church cd recorder CDR300 will not rcord it is reading ..... error

Please call soon need help!

Call: Pastor Carlwell Culp
@ 803-329-2275

Thank You

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Put a lens cleaner into it for the first troubleshoot.

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After reading toc of my Marant zcd5003 the display is "error" seeking help to find out the cause


  1. No disc. - Load a disc into the tray.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc region code does not match region code of the player.
  4. Disc type is not the correct type to play.
  5. Disc is damaged or dirty. Clean the disc or try another.
  6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.
follow the steps and fix it.
God bless you

May 27, 2013 | Marantz CD5003 CD Player

1 Answer

Power failed in middle of a recording session when the machine was in Pause mode. How can I recover the recorded file?


You can try computer software like Nero or Roxio and finalize the disc as it is. This is exactly why I had advised Churches that went from reliable cassette tapes to CDR to put UPS units on the CD recorders as they do not react too well to power outages. If you were using an Open Reel there would be very little loss of the recorded signal.

Mar 24, 2013 | Marantz CDR-300 CD Recorder

1 Answer

Hi.I have CD Recorder Marantz DR6000.After reading and initalizing blank CD-R Audio next on display show OPC ERROR.It,s reading all audio CD,s,oryginal,and CD-R.When I wanna finalized old CD-R,recorded by...


DR-6000 only accepts CD-R audio or CD-R music discs, not the standard CD-R discs. the difference is that the audio and music discs have the OPC formatted differently and they cost a bit more because they include the royalties fee. Standard CD-R discs won't work in this recorder. The correct discs have compact disc "digital audio" logo on them.

Oct 01, 2010 | Marantz DR-6000 CD Player

1 Answer

I have a Marantz CDR632 and I am recording sermons for a church. After I am finished and completed the finalization process I try to use in a duplicator and it gives an error message that it is a problem...


We have the same problem with our CD duplicator at our church. When the duplicator finishes it always shows 'fail' but the copied CD-R appear to have copied correctly and play on other players.

Feb 26, 2010 | Marantz CDR632 CD Recorder CDR-RW with...

1 Answer

I recently purchased a used Marantz CDR300 CD Recorder. Everything powers on but when I put a cd in the tray, it doesn't close automatically when I press the close button and when I manually close it, the...


CDR error means the trouble is in the laser eye,maybe the eye is faulty already or dirty. If the laser eye is dirty,then you need to clean it with a cotton buds.Open the unit then wipe the laser eye tenderly with the cotton buds or buy a DVD / CD cleaner kit.Just click this link;
http://electronics.bizrate.com/search__SEARCH_GO--GO__SEARCH_GO.x--36__SEARCH_GO.y--16__keyword--dvd+lens+cleaner__search_box--1__sfsk--1.html

Hope its help:

Regards;
VOTIT

Jun 27, 2009 | Marantz CDR-300 CD Recorder

1 Answer

CDR is not working


have a look on ebay for a cheap working donor recorder as spares are very expensive and very hard to get hold of.
i'm guessing your recorder either doesn't read discs, or it won't eject? which is very common and means either the servo board is faulty or the laser.

The following recorders i know off hand for a donor mechanism are:

MARANTZ DR-6050
PHILIPS CDR-775
PHILIPS CDR-770

if it proves to be just a faulty laser, all 3 of the above have the same laser unit.
if it proves to be a faulty servo board, all 3 have the same servo boards except if you fit one out of a philips model it will show 'PHILIPS CD RECORDER' on the display at power up but will still work nontheless.
obviously if a marantz is found it will show 'MARANTZ CD RECORDER' as normal.

hope this helps.

Aug 27, 2008 | Marantz CDR500 2-Disc CD Recorder

1 Answer

Marantz cdr300


try turing off opc in menu see if that helps use hi end meadia only memerex i like

Jan 18, 2008 | Marantz CDR420 CD Recorder

Not finding what you are looking for?
CD Players Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz CD Players Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you a Marantz CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...