Question about GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet

2 Answers

Dvmre triplex there is a horizontal lines the goes up

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the camera too and make sure that you have a good connection between the cam and the DVR.

Posted on Jun 11, 2010

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

I would switch monitors and see if the problem still exists. Sounds like the monitor not the Dvmre.

Posted on Aug 24, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

If any cameras on night vision the pic soo fuzzy u cant see, NV off it goes back to visible?

At night can you see the red led's ? If not they are not working. Make sure in camera settins if there is a option to enable night vision. If you mean at night it is fuzzy cloudy then it could be led's are bouncing light back creating a hazy whitish image. Or lens is dirty on the inside which it happens. Last is low end low quality cameras

Aug 28, 2015 | Vision Surveillance Cameras

1 Answer

The door goes partially down then back up. The lights flash. What can I do to fix this?

check your safety photo eyes are lined up. you will have one on each side of the door on the bottom by the guide tracks. you should be able to see an LED "light" solid is good flashing is bad.

a solid light means the the photo beam is good from one side to the other and you should be able to block the beam with your foot and see the led go from solid to flashing.

May 11, 2014 | Chamberlain Liftmaster Professional Remote...

1 Answer

C300 jitter

how long has it been installed? I would take it down and check the motor and gear drives to be sure that no insects have built a nest and that there is no problem with lubricant that has hardened or dust and debris on the mechanical parts.

Oct 28, 2013 | Canon 1867b011 Vb-c300 Ip Camera W/ Clear...

1 Answer


diaghram on the side of the carb facing towards muffler 4 screws when you take them out be careful there is a diaghram you replace, spring saver, and spring make sure they go back in the same order, whenever these engines or any horizontal with pulsa jet carb doesnt start it is usually because of diaghram I ran alcohol go karts and you have to drain the alcohol after you are done running karts and they will eat them up quicker than normal gasoline

Jun 23, 2011 | Sears Surveillance Cameras

1 Answer

1/3" SONY ir camera car-b3110hq. dc12v pal. Black horizontal lines scrolling up the screen. About an inch wide. Camera still working though. Intermittant fault seems to come back when the auto focus...

It seems that the power adapter in for for you country. It may be a import. Normally adapters can handle 50/60Hz but not good adapters or false adapters or adapters made for certain region are unable to handle both frequencies. This is normally the cause of the stripes you are seeing.

If you own website, add live support almost free
Let real security guard watch your cam for $1/day

Jan 15, 2010 | Sony 1/3 inch CCD infra red CCTV Security...

1 Answer

I'm having a problem with a Palco PTZ security camera where the screen is red and says video loss and from time to time video footage comes back for 2 or 3 minutes and then goes away

the first line of troubleshooting for this is to check your power and video connections on both ends of the cabling. ensure that the connections are tight and the fittings appear to be of decent quality and in good physical condition. If this does not solve, continue to replace power supply, if noy joy still, camera is at fault.

Aug 11, 2009 | Surveillance Cameras

1 Answer

Code 217 & 219

It's only the final steady number that is the reading. When you push TEST it will show 888 and beep annoyingly a few spaced times and then it will display a number between 100 and 400 (around 200 ,,, I had 217) that is just the detector testing to see if it can display numbers. These are NOT CO levels. Then it goes back to 888 and finally displays a steady number. If it's 0 then you're clear. All o f this from the owners manual.

Mar 28, 2009 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

My landline rings only once after which it goes to fax tone. If you pick up in that ring or else you will hear the fax tone. Even the caller hears a fax tone. I DO NOT have a fax in my house or ever...

This sounds like a crossed line and yes it is ATTs falt! call them back...Is this an apt unit you live in? somone could tap into your line.Check outside hookup/

Dec 11, 2008 | First Alert PIR720R 360 Hands-Free Light...

1 Answer

Ikegami pm 909 shrinking picture

The deflection current is dropping in both vertical and horizontal. This suggests a low B+.This can also be caused by a flyback problem. Check all the Caps in the HV section. If not, it's the flyback.

Aug 13, 2008 | Surveillance Cameras

Not finding what you are looking for?
GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Surveillance Cameras Experts


Level 3 Expert

1043 Answers

Brad Brown

Level 3 Expert

13569 Answers


Level 3 Expert

3944 Answers

Are you a GE Surveillance Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides