Question about Bosch Dishwashers

Open Question

Bosch Exxcel Dishwasher model SGS56E02GB/47 When you switch it on no water is coming through - what sounds like the pump/motor sounds a lot rougher than normal and there's a very very faint electrical burning smell. The timer counts down, but it never appears to do anything and continues doing so after the counter has zeroed.

Posted by on

5 Suggested Answers

  • 409 Answers

SOURCE: Bosch Exxcel Dishwasher operating instructions

hi there,

can you supply the complete model # for me and also an e-mail address and i will e-mail you the pdf file.

thanks

Posted on Sep 25, 2008

  • 409 Answers

SOURCE: Bosch Exxcel Max USER MANUAL

hi there,

if you send me your e-mail address, i will forward you the file in .pdf.

thanks,
c

Posted on Oct 24, 2008

heatman101
  • 43501 Answers

SOURCE: bosch dishwasher no water coming from arms but not blocked

Hi,
Here is a tip that I wrote about that....


http://www.fixya.com/support/r4021363-dishwasher_trouble_no_water_entering

heatman101

Posted on Apr 21, 2010

  • 1 Answer

SOURCE: Bosch dishwasher timer sticking

I have been told to replace the timer which I am looking to do the same to my machine!

Posted on May 25, 2010

  • 1 Answer

SOURCE: Bosch Exxcel Dishwasher operating instructions

What dose E15 mean

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Bosch Exxcel dishwasher which runs the drain pump constantly even with the door open and despite there being now water in the machine at the cycle wont start. I have checked the warer amtrix and...


I am not sure about this model but most models run a drain cycle for a set period at the start of a wash cycle and then move on to normal filling and cycle of machine provided the various switches are at the low level it will carry on to its set cycle,is the apartment or flood switch ok?

Jun 30, 2010 | Bosch 24 in. SGS47E02 Exxcel Free-standing...

1 Answer

Sprayer arms not spinning


I know this sounds too simple, but on My dishwasher which is an SHX46b model, the plastic supply arm that comes out of the pump and supplies the upper arm popped out of it's correct position at the base. It is held in place by two dinky nibs. I just popped it back in and voila, pressure was back and arms were spinning.

Jul 02, 2009 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...

1 Answer

Bosch classicxx dishwasher not working check water light on


he there,

sounds like there may be something caught in the drain pump itself.

can you provide me with the complete model # on your dishwasher please?

thanks

Sep 25, 2008 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...

1 Answer

My bosch exxcel dishwasher will not drain after wash cycle


That is because the water level switch activated by the floating sensor is stuck.

You probably need to have the water level switch replaced.

You can find parts on websites below:

You can find replacement water level switch , and schematics on websites below:

BSH - Bosch Customer Service

Appliance411: Repair Parts

how to mend it .com - ~~ Wiring diagram for BOSCH Dishwasher.

May 26, 2008 | Bosch 18 in. SRS45E02 / SRS45E08 Exxcel...

1 Answer

Wont drain!!!


Check first the drain lines and the drain pump.

If the drain pump is working, and there is no problem in there, then the problem is usually because the water level switch activated by the floating sensor is stuck.

You probably need to have the water level switch replaced.

You can find parts on websites below:

You can find replacement water level switch , and schematics on websites below:

BSH - Bosch Customer Service

Appliance411: Repair Parts

how to mend it .com - ~~ Wiring diagram for BOSCH Dishwasher.

Jan 06, 2008 | Bosch 18 in. SRS45E02 / SRS45E08 Exxcel...

2 Answers

Bosch sgs6302gb


the problem is the circulation motor needs to be loosen up take a 5'16 driver open the filter on the bottom and loosen it at froom thr small hole on the left.

Dec 10, 2007 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...

2 Answers

Dishwasher pumps water in and out, but does not wash


Try tilting the machine back 45 degrees for one minute 7 then try one of the programmes. Serousely outr Bosch diswasher was firstly not draining water then not taking in water & another forum suggested this odd manouvre & all is fine now

Nov 06, 2007 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...

1 Answer

Bosch dish washer SGS56E02GB


anti flood device has been activated, this means you have water in the base of appliance. most likely a leak, or if you have been using 3 in 1 tablets, and rinse aid this will over foam appliance and foams leaks into base.. try tipping d/w back to let water out of base..then try d/w again... if anti flood activates again...call an engineer.. ps check big nut that secures salt container to base of d/w, it can come loose which will cause water to leak into base ally

Jul 01, 2007 | Bosch 18 in. SRS45E02 / SRS45E08 Exxcel...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...