Question about Uniden Cordless phone EXS9950

Open Question

Wx1377 uniden cordless phone

I replaced battery and charged but have no power in the phone or dial tone etc-do you have any suggestions

Posted by on

5 Suggested Answers

  • 7 Answers

SOURCE: Cordless phone

press menu then globel setup and then press dial mode then change the the dial tone you want

Posted on Nov 10, 2007

  • 86 Answers

SOURCE: Uniden TCX805 Cordless "loses" dial tone

Sounds like the switching mechanism that creates the link is stuck. When you answer your phone, you allow the voltage to complete it's path and you either answer the phone or you hear dial tone. If that switch is stuck closed, even though you hung up the phone, the connection is still alive. When you try to pick the phone back up later, the connection is still closed, but your phone has already passed it's "if you would like to make a call" message and you hear no dial tone. Unplugging the power to the phone resets this switch and all is good again.....that is until it gets stuck again. I have seen this problem with phones after a near lightening strike at the house. Sounds like you need to get a new phone as I don't think this is repairable.

Posted on Jan 20, 2008

jadyn08
  • 12 Answers

SOURCE: Uniden cordless phone. No dial tone.

Hi peddler65, did you plug your phone into another area to see if there is a dial tone. Then if not call the phone company or find the D-mark (where your dial tone ) comes into your home and put a jack on that and plug a phone in with all phones in the house unplugged.

Thanks.

Posted on Nov 15, 2008

funkyjacob
  • 76 Answers

SOURCE: No dial tone on handset

It may not be registed with the main unit. You may need to register the handset. With my uniden all i have to do is put it in the main base until it says what handset it is (it should be a number).

If you have any questions please dont hesitate to ask

Posted on Dec 02, 2008

  • 79 Answers

SOURCE: I have no dial tones on our two uniden 5.8GHz

Make sure the phone and the phone base is turned on. Check the phone cables at the back of the phone base where you charge your cordless phone. It should be properly connected to the phone jack on the wall and at the back of the phone base. Try unplugging and replugging it back in. If that fails, try changing the phone cable. If still there's nothing, try to connect another phone on the phone line. If you get a dial tone, it means you have a problem with the wireless phone set, if not, contact your phone company.

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I not have manual for Uniden dect 6 cordless phone on my phone I can't get any dial tone,I think I pressed a button on the phone either mute, intercom or redial, how to reset phone


If you have no dial tone the problem is most likely the base station has failed, nothing you can do will kill the dial tone (no button you pushed etc.) except a failed base station.

Dec 19, 2016 | Uniden DECT 6.0 Cordless Phone

1 Answer

I just got a uniden cordless phone and it has no dial tone


Allow it to charge for at least 2 hours. If after 2 hours you have no dial tone Unplug your Phone and plug in a regular un-powered phone. If you get DT your phone is out of box defective, and you will need a new one. If it does not have dial tone then there is a problem on your phone line and you need to contact your phone company. Note, the phone company will charge you for repairs inside your house.

May 05, 2011 | Uniden DECT15602 Cordless Phone

2 Answers

How to charge the battery of a new uniden phone?


if u have that phone charger mens u can charge that phone

Apr 04, 2010 | Uniden Cordless Phone

1 Answer

No dial tone on handset


It may not be registed with the main unit. You may need to register the handset. With my uniden all i have to do is put it in the main base until it says what handset it is (it should be a number).

If you have any questions please dont hesitate to ask

Sep 25, 2008 | Uniden 2.4 GHz Cordless Phone System

1 Answer

No dial tone


my base unit did the same.... power from the wall was out ... check GFI switch.

Sep 15, 2008 | Uniden Cordless Phone

1 Answer

Bought phone EX18560 Series yesterday. floolowed instructions to charge. Today I came home from work, plugged in telephone jack. phone will not turn on. Attempted to re-register (4X's). Led flashes....


I have two older (2002) model cordless Uniden phones that require the handsets to return to their original factory bases. If they have rested on another Uniden base, even of the same model, there is no dialup tone. Replace to the original base and you should be back in service.

Aug 11, 2008 | Uniden Lands Phones

1 Answer

Dial tone


throw it against the ******* wall..I hate these god damn phones

Mar 25, 2008 | Uniden Cordless Phone

2 Answers

GE 5.8 ghz cordless phone


Get another telephone and connect the telephone cord from your cordless phone to it. If it works, then you know the problem is with your GE cordless phone. If it doesn't, try replacing the telephone cord. If still no good, call your telephone company.

Nov 05, 2007 | Uniden Cordless Phone

1 Answer

CORDLESS PHONE - NO DIAL TONE


Plug out the power from the main charger and then plug in again. It needs to reset after they have gone dead. Immediately you can lift one of them off the charger and you will hear your dial tone.

Apr 18, 2007 | Uniden DXAI5588-2 Cordless Phone

Not finding what you are looking for?
Uniden Cordless phone EXS9950 Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

4950 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...