Question about Kyocera FS-1030D Laser Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you are overcomplicating it... all you need is a compact flash card big enough for the firmware... then you upload the firmware to the card and stick the card into the printer... but first power down printer and plug it out and then turn it on and follow the display... it will prompt you
here is the steps...
you will see ready
then press menu... arrow down to memory card
press forward arrow
you will see format
you will see processing
when its finished
you will see ready...
turn off machine... unplug it...
pull out compact flash
plug machine in
turn it on...
the **** for the compac flash is on the right hand side at the bottom by the ventillation opening...
Posted on Dec 23, 2009
Tips for a great answer:
LSU cleaning motor error
When the LSU cleaning motor
is driven, an error signal is
detected continuously for 1 s.
cable or poor
contact in the connector.
Reinsert the connector. Also check for continuity
of the connector cable. If none, replace
May 17, 2014 | Kyocera FS-C5030N Led Printer
Oct 22, 2010 | Kyocera FS-C5030N Led Printer
Dec 09, 2009 | Kyocera FS-C5030N Led Printer
Nov 09, 2009 | Kyocera FS-C5030N Led Printer
Sep 29, 2009 | Kyocera FS-C5030N Led Printer
Mar 30, 2009 | Kyocera FS-C5030N Led Printer
83 people viewed this question
Usually answered in minutes!