Question about Crosman 1377 177 Single Shot Air Pistol

1 Answer

Older Crosman 1377 Air Pistol. Believed to be bad seals. I'm told I can buys the seals from plumbing supply store and fix is easy to do myself with no experience. True?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Yes. This is as simple as replacing O-rings and seal bushings. you may get out for less than $5 worth of supplies. Just be sure to label everything as you take it out of the gun and lay out the parts in the order you removed them. this will make reassembly MUCH less painful. Oh yeah.... remember to clean and oil the parts as you put them back in.

Posted on Apr 11, 2011

Testimonial: "Very helpful. Will now try to do it. "


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Crosman 1377 single shot pellet air pistol-how do i remove pellet from barrell?

if you dont have a cleaning rod for it you can go to your local bass pro/cabelas/outdoors store and get a cleaning rod for a .17 caliber for fairly cheap. you should be able to push the pellet out or clean it if there is dirt or grime in it. and make sure you use the right caliber pellet! (:

Dec 24, 2011 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

I have a crossman 1377 (177) cal pellet pistol. Is it ok to shoot BB'S in this gun? Does it damage the rifling in the barrel? Thanks, Gary

yes it safe to shoot bb,s in the 1377 pump pistol,i have 3 of them they actually shoot true'er and with more vilocity

Sep 19, 2011 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

Looking for an o-ring for beeman tempest pistol where pellet is inserted

Hi orichtero...
Take the air gun to the nearest roller bearing seller, they will have o rings also...they will be able to fit the right o ring for your gun for you
Please take time to rate me

Aug 11, 2011 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

Pistol will not pump up

Sounds like the O-ring inside the pump mechanism is bad or going bad. You can try to add a little lubricating oil and see if that can stop the O-ring from leaking.

Hope that helps!
Please don't forget to rate.

Dec 26, 2010 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

I have a crosman 1600 air pistol. It has sat for about 10 years. When I put a new cartridge in, all of the co2 escapes right out. Can I replace the seals myself or should I take it to some one with...

I just finished replacing mine it was easy. Use a small screwdriver in the slot and tap it in a circular motion until it loosen then it will come out easily. Go to the hardware store and buy a blue .5" maybe it's 17/32" X .125" thick. remove the old washer, the puncture pin, and the screen. Clean all of the parts with alcohol. Reassemble in reverse order and tighten the brass locking "screw" securely. It's a bit of work screwing it back in so be carefull not to round off either of the slots. I used a standard 1/4" and .125" screwdriver like it was a lever to spin it around. The smaller screwdriver at first the the lager one to get it tight. It may take pliers to tighten the new cartridge in mine did. Instead of doing it as I did and tighten the H__l out of it tighten and test in small incraments. Testing after each one. This does work and the seal are readily available in the plumbing section of good hardware stores. Happy Hunting

Sep 01, 2010 | Crosman Optics

2 Answers

My crosman 1377 won't pump up. Is there a replacement part available for this problem?

The pumps seal is bad so take it apart and cut a piece of leather out to fit
Coat the leather with Vaseline and it will operate just fine for you

Jun 07, 2010 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

Air pistol c02 replacement

Well that takes me back! I have an old Daisy 1200 -- essentially the same pistol in a different brand.

My Daisy has a hand-turn screw to hold the CO2 cartridge in place, and you have to tighten it quickly until the leaking stops. It does this by pressing the cartridge up against a nylon washer to form a seal (and of course pushing it into the piercing pin to get the CO2 out!)

With age, I'd expect that nylon washer to get stiff or crack, making it harder to form a good seal. You don't need an exact replacement part, but if that's happened to yours then you will need to replace it with something more-or-less the same size as the original.

May 30, 2010 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

Crosman 1377 air pistol

the seal must be broken. send it back to whom you bought it from and get an exchange

Oct 22, 2008 | Crosman (4032)

Not finding what you are looking for?
Crosman 1377 177 Single Shot Air Pistol Logo

Related Topics:

1,051 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosman Cycling Experts


Level 3 Expert

76109 Answers


Level 3 Expert

102366 Answers

John Egan
John Egan

Level 2 Expert

73 Answers

Are you a Crosman Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides