Question about Dewalt DW735R Reconditioned Heavy Duty 13" Three Knife, Two Speed Thickness Planer

1 Answer

WHEN PLAINING A BOARD IS COMING OUT WITH A UNEVEN PLAINING ON THE ENDS OF THE BOARDS ABOUT 3" TO 4" FROM THE EANDS.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

This is normal with all planers, when you feed the board in the planer there are two feed roller one on each side of the knives so you get uneven pressure on the board at the start and at the end of the board .when planing boards for a project always add 10"inches or more extras then cut to lenght after planing to thickness required. never cut boards to length before planing .

Posted on Apr 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My konica minolta cf2002 is bringing plain paper when i copy from it and sometimes it says


Image processing Board and or the Machine Control board are not communicating. Check the connections between both boards. Have a tech come out check all the connectors on the boards check for a bent pin!!! worse case the board(s) are bad. Going to be tuff finding either board.

Nov 25, 2012 | Minolta Office Equipment & Supplies

Tip

How To Adjust the pitch & brake


1.switch off deck & unplug it.
2.take off slip matt & place fingers in the holes, then twist & pull until platter comes off.
3.undo the 4 or 5 screws which hold the plastic dust cover on.
4.at the top right of the board theirs two pots labelled "PITCH" & "BRAKE" mark them both with a marker pen before you adjust them.
5.turn the brake or pitch pot clockwise to tighten/speed up & anticlockwise to slacken/slow down.
good luck:

on Jan 30, 2012 | Technics Audio Players & Recorders

1 Answer

Canon imageclass 4412 E301-0001 error message


Wish I had better news, but the information I found on this says, "E301-0001 Insufficient light intensity in shading" - the details I've summarized below. See the website listed for a full list of error codes. Best of luck with it!

-------- Quoting --------
When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
(3) Replace the Contact Sensor.
(4) Replace the Main Controller Board.
----------- End Quote ------------
Sure hope its just a loose cable...
Mark
http://printcopy.info/?l=en&mod=free&chap=erc&brand=Canon&model=MF4412

May 17, 2012 | Canon Office Equipment & Supplies

1 Answer

Samsung microwave displays press 1-4...


The SE indicates a short in the keypad membrane, but to cure this! the whole keypad control board should be changed if effort to resolve is decided, I would also suggest checking the pricing.

Apr 16, 2012 | Samsung SMH9187ST Microwave Oven

1 Answer

I have a Sharp Aquos LC-46D64U. The power and pox light flash together once followed by two flashes of the power light. The tv will not turn on, even after trying reset. Do you know what this error code...


I just had one of these in the shop. It was a bad Main Unit ( Apx $250-$350 for the part alone) Another problem is there can be 8 different versions of this board. There is the plain and the A version shown to the right of the model# . The A version has 4 different boards and the plain version has 4 different boards. There is a board # near the middle of the board with a # in a triangle above this # and is 1 to 4. You might find on EBAY or Shop Jimmy's for a low price, but it is a Gamble! John

Jul 07, 2011 | Sharp Televison & Video

2 Answers

I have a Sharp LC46SB54U that has no video on the screen. The blink code is 3 on the power light and 1 on the opc. I have tried to reset it with the hold the input and -Volume with no change. Any Ideas...


I just had one of these in the shop. It was a bad Main Unit ( Apx $250-$350 for the part alone) Another problem is there can be 8 different versions of this board. There is the plain and the A version shown to the right of the model# . The A version has 4 different boards and the plain version has 4 different boards. There is a board # near the middle of the board with a # in a triangle above this # and is 1 to 4. You might find on EBAY or Shop Jimmy's for a low price, but it is a Gamble! John

Jul 05, 2011 | Sharp LC46SB54U 46 in. LCD TV

1 Answer

Pioneer 65" TV Model # SD-643HD5 won't power up.


I would suggest replacing the board itself, chances are what caused those fuses to blow is still faulty. did you check those fuses again after you powered it back up?

Jun 12, 2011 | Pioneer Televison & Video

2 Answers

Engine works but no power is produced


I have a COLEMAN 6250 Watt Powermate too, and it stopped producing 3 hrs into our blackout. I unbolted the four 7/16" bolts holding the end bell assembly, and looked at the circuit board (bridge rectifier assembly) and saw that 4 of the diodes had melted free from the circuit board. This is a $30 replacement part, and seems to be a common problem with these units. http://www.jackssmallengines.com/coleman_control_board.cfm
Other common and cheap to fix problems may be the brushes are worn out. Unscrew the phillips screws under the plastic tab on the end bell of the generator, and pull out the metallic rectangular posts attached to the copper wires. If they are shorter than 1/4", broken, or uneven, they may need to be replaced. They are about $3 each.
I probably drew too much power from 1 outlet on the generator, and it caused the board to fail instead of tripping the circuit breaker. (BTW, the repair shop told me it would cost $550 to replace the entire rotor/stator circuit board assembly. I have a strong feeling they didn't even look at any of the above parts, because they didn't have a clue as to what they were doing!)

I liken this to taking your car in because it won't start, and the mechanic saying you need a new engine!

Good luck!

Jun 04, 2009 | Coleman Powermate Premium Plus 6250W...

2 Answers

My Brother Fax 8360P LCD says "Printing On Line" when I start it up and the message won't go away. I can send a fax but it takes at least 15 minutes for the fax to be received at the other end.


It sounds like you have logic board problems. Take the main board out of the machine remove all power sources, batteries, etc. let the board sit 24 hrs. install board into machine. If machine works, it's fixed. If not replace main board.

Jun 18, 2008 | Brother Office Equipment & Supplies

Not finding what you are looking for?
Dewalt DW735R Reconditioned Heavy Duty 13" Three Knife, Two Speed Thickness Planer Logo

Related Topics:

1,014 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Cutter Tools Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

JOHN LAPIER

Level 3 Expert

2428 Answers

Are you a Dewalt Cutter Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...