Question about Canon CanoScan LiDE100 Flatbed Scanner

2 Answers

Scan gear internal error occured code: 5,202,52

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

TO ANYONE READING THIS...I nearly took a hammer and smashed my Canon LIDE 110 Scanner cause I was so mad that it gave me this stupid error (5,202,52) no matter where I was connecting it and I thought it was done...

THEN I just took another USB Cable (Like I have around 10 different USB Cables) ...AND IT WORKED! Try several USB cables before you give up on it...also don't start messing around with drivers and stuff, you could end up screwing up your system like I did...

I hope this helps someone out there in the future with error 5,202,52 or 5,202,54, etc.

Try at least 4-5 different USB cables before anything else..

(If you want to know, I successfully used the USB cable with one of the fat black circle things on it (I think its for power or something), not just a straight usb cable. It's still a 5 pin USB cable however (Regular USB on one side, small 5 pin connecter on the other side))

Posted on Jan 21, 2013

  • Petko Hinov
    Petko Hinov Apr 25, 2014

    I changed the USB port on my computer and it worked, after a clean installation of the driver to that port.

  • Boris
    Boris Feb 10, 2015

    Thank you. Was trying for 2+ hrs doing the usual driver uninstall, reboot etc. tried 2 other cables and it is just fine.....

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Perhaps you have forgotten to unplug the scanner before scanning? That's what happened to me. I kept getting different error codes, 5,202,63 or 5,202,52 or 5,202,54 and also a message that the driver was not in the TWAIN folder. According to the help file the problem might have been due to my nfts file system. I also tried downloading various new drivers. Nothing helped until I noticed that I had not unplugged the scanner!

Posted on Nov 17, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 910 Answers

SOURCE: When I attempt to scan

This error code is generally caused due to Windows not starting the Services associated with Windows Imaging. Use the directions below to verify the services are started.

1. Click Start then right-click over My Computer then click Manage.
2. Click Services and Applications then click Services.
3. Scroll down to Windows Image Acquisition (WIA) and Status should show as Started.

If it doesn't then right-click over Windows Image Acquisition (WIA) then click Properties.

Select Automatic in Startup Type: then click OK

Now reboot your computer and check as above if Windows Image Acquisition (WIA) is shown as started.


I believe a new driver was released earlier this year to rectify certain issues in the Windows 7, Vista and XP. You need to check that your release is up to date. If you need any further assistance then please just let me know.

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If I do the scan, the scanner is warming up for about 10 minutes. after that it said internal error occured. Scanner driver will be closed. Code : 3,202,19


try to uninstall the driver then install it again
note:
1-after you uninstall make restart for computer.
2-don`t connect the scanner USB until the driver installer required this.

Mar 17, 2016 | Canon CanoScan LiDe110

1 Answer

Why do I get an error message: Internal error occurred. Scan driver will be closed. Code:5,202,52?


Look at the bottom of the scanner and there should be a lock/unlock slider. Unlock it and see what happens.
If it is already unlocked then the drive/stepper motor or belt is bad.

Mar 27, 2015 | Canon CanoScan LiDE 25 Flatbed Scanner

1 Answer

Driver


Perhaps you have forgotten to unplug the scanner before scanning? That's what happened to me. I kept getting different error codes, 5,202,63 or 5,202,52 or 5,202,54 and also a message that the driver was not in the TWAIN folder. According to the help file the problem might have been due to my nfts file system. I also tried downloading various new drivers. Nothing helped until I noticed that I had not unplugged the scanner!

Jun 20, 2013 | Canon CanoScan LiDE100 Flatbed Scanner

1 Answer

Canoscan Lide 110 driver


Perhaps you have forgotten to unplug the scanner before
scanning? That's what happened to me. I kept getting
different error codes, 5,202,63 or 5,202,52 or 5,202,54 and
also a message that the driver was not in the TWAIN folder.
According to the help file the problem might have been due
to my nfts file system. I also tried downloading various
new drivers. Nothing helped until I noticed that I had not
unplugged the scanner!

Jun 27, 2012 | Canon CanoScan LiDE110 Flatbed Scanner Inc...

2 Answers

Error 5,202,52 on scanner canon lide 110


TO ANYONE READING THIS...I nearly took a hammer and smashed my Canon LIDE 110 Scanner cause I was so mad that it gave me this stupid error (5,202,52) no matter where I was connecting it and I thought it was done...

THEN I just took another USB Cable (Like I have around 10 different USB Cables) ...AND IT WORKED! Try several USB cables before you give up on it...also don't start messing around with drivers and stuff, you could end up screwing up your system like I did...

I hope this helps someone out there in the future with error 5,202,52 or 5,202,54, etc.

Try at least 4-5 different USB cables before anything else..

(If you want to know, I successfully used the USB cable with one of the fat black circle things on it (I think its for power or something), not just a straight usb cable. It's still a 5 pin USB cable however (Regular USB on one side, small 5 pin connecter on the other side))

Jan 13, 2012 | Canon Office Equipment & Supplies

2 Answers

Internal error occured code: 5,202,52 after installing Canon CanoScan Lide 210


Perhaps you have forgotten to unplug the scanner before
scanning? That's what happened to me. I kept getting
different error codes, 5,202,63 or 5,202,52 or 5,202,54 and
also a message that the driver was not in the TWAIN folder.
According to the help file the problem might have been due
to my nfts file system. I also tried downloading various
new drivers. Nothing helped until I noticed that I had not
unplugged the scanner!

Apr 11, 2011 | Canon CanoScan LiDE100 Flatbed Scanner

1 Answer

Scanner driver will be shut down error code 5,202,52


there are files corrupted on your hard drive Error 5202 takes place when the system is misconfigured or its essential files are missing. Such problems occur when a PC is not maintained properly and has accumulated many critical issues that require immediate repair.
you could run the check disk utility
click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive then defragment your hard drive
hope this helps

Nov 27, 2010 | Computers & Internet

2 Answers

MY PSP NETWORK CONNECTION WHEN I SCAN FOR A CONNECT IT SAYS (80410A0B) AN INTERNAL ERROR HAS OCCURRED


MY PSP NETWORK CONNECTION WHEN I SCAN FOR A CONNECT IT SAYS (80410A0B) AN INTERNAL ERROR HAS OCCURRED

Aug 30, 2008 | Sony PlayStation Portable (PSP) Console

1 Answer

Scan gear error code:22500


Check Cannon support site, it has all solutions. Good Luck

Jul 26, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Canon CanoScan LiDE100 Flatbed Scanner Logo

15,289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...