Question about Office Equipment & Supplies

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

What is the meaning of the word "adverticing"? Is it's root word "adverse"?

May 15, 2017 | Cell Phones

11 parts copper and 4 parts zinc for a total of 15 parts.

Thus 11/15 copper and 4/11 zinc.

11/15 of 75 pounds is 55 pounds. 4/15 of 75 pounds is 20 pounds.

Hence 55 pounds of copper and 20 pounds of zinc.

However, if you really want to know the ratio of the statue, then it's given in the problem as 11:4.

Thus 11/15 copper and 4/11 zinc.

11/15 of 75 pounds is 55 pounds. 4/15 of 75 pounds is 20 pounds.

Hence 55 pounds of copper and 20 pounds of zinc.

However, if you really want to know the ratio of the statue, then it's given in the problem as 11:4.

Oct 06, 2014 | Cars & Trucks

Its prob the distributor unit that fails.

Best to pop along to your local Garage and have a diagnostic test carried out.. should cost around forty pound uk....takes the guesswork out of the equation.

Jun 28, 2014 | 2006 Rover 75 Connoiseur

That depends on what you have. .75 cubic feet of water will weigh about 47 pounds. .75 cubic feet of gold will weigh over 800 pounds.

Apr 24, 2014 | Office Equipment & Supplies

10mm nuts are 40 foot pounds. 8mm nuts are 18 foot pounds. You need to torque all the nuts to 10 foot pounds to start, then torque the 10mm nuts to 20 foot pounds, then 30 foot pounds, and then 40 foot pounds. Retorque all the 10 mm nuts to 40 foot pounds and then retorque the 8mm nuts to 18 foot pounds. Torque the bolts in a criss-cross pattern.

Oct 27, 2013 | Victory V92 Cruiser Motorcycles

my laptop is toshiba satalite c660-15n it's does not worked.

May 20, 2013 | Computers & Internet

A 30lb bottle or R22 Refrigerant your cost would be $650. As a Licensed Refrigeration Mechanic, I would charge 4 hour minimum for leak check and repair. The hourly charge is $75 and the Refrigerant which is extra to the price is $35 - 40 per pound. As the price of R22 Refrigerant goes up in price as it is being phased out per Government Regulations, you will see $75 - $100 per pound +. As for my pricing, my fellow workers say I charge too cheap. If you take $650 and divide it by 30, it would be $22/pound, but it can only be delivered to you and charged into your unit by a Licensed Refrigeration Mechanic...then the labor comes into effect for all of this. So in an nutshell, if you were charged $30 - $75 / pound , I think you did well.

I hope this clears it up.

I hope this clears it up.

Jul 14, 2010 | Whirlwind FH-778 Air Conditioner

70-75 foot pounds. Final torque must be reached in 3 equal steps, torque each to 25 foot pounds then 50 foot pounds, then 75 foot pounds. Recheck final torque in sequence.

May 16, 2010 | 1984 Ford F 150

I believe those are only 6 MM bolts, I wouldn't go more than 75-80 inch pounds. If they are 8 MM bolts you can tighten them to 15-18 foot pounds. Now, 6 and 8 MM is the diameter of the bolt NOT the head size. To convert inch pounds to foot pounds multiply or divide by 12. For example 12ft.lbs. = 144in.lbs. 12X12=144.

Feb 22, 2010 | 1994 Ford Taurus

170 people viewed this question

Usually answered in minutes!

×