Question about Canon PIXMA MX310 All-In-One Printer

1 Answer

My printer reads cover open however the cover is closed. this error message occurred after the ink was changed. What am I missing?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 125 Answers

Why don't you turn off your printer and restart.

What's the error code? There should be some letter on LED display.

Posted on Apr 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get the message "printer error has occurred" and please turn the printer off and on repeatedly with no change. This is the Epson Artisan 835


My Epson Artisan 810 repeatedly would give me the printer error message with the only option to turn off the unit and turn it on again. Over and over it would give me the printer error message. With the unit off, I opened the cover (like you would to replace the ink cartridges) and forced the CD tray all the way out like you are about to load a CD for printing, closed the cover, then started the unit up again. For me that did the trick. It went through it's normal 60 seconds or so of set-up, then worked fine ever since. Not sure if this will work for you, but it worked for me.

Dec 29, 2012 | Office Equipment & Supplies

1 Answer

Cannot recognized ink in my canon pixma ip2770


i am having canon pixma ip 2700 inkjet printer. it worked properly till. I got refilled both cartridge and fix it in my printer but the cartridge was not recognized. i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that "An error occurred.Some ink cartridges cannot be recognized." and a message box is opened and it shows that "An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover." help me to recover from this problem i can't afford to buy new cartridges. suggest me some ideas and procedures to

Aug 31, 2012 | Canon Office Equipment & Supplies

1 Answer

I changed the ink in my Lexmark 3400 printer and I keep getting an error message "cover open" and it's not open. I tried everything....unloading the software then reloading the software, shutting it off...


The printer displays a 'Cover open, please close cover' error message, even though the cover is closed.

This can happen if the lever on the cover open sensor is knocked off the switch assembly.

Nov 30, 2009 | Office Equipment & Supplies

2 Answers

I have a kodak 5500 aio printer. I replaced the


Try the following:

1. Open the printer access door.
2. Put out both ink cartridges and the printhead.
3. Let the printer access door open.
4. Put out all paper.
5. Pull out the ac adapter at the back of the printer.
6. Wait 60 sec.
7. Pull in AC adapter.
8. Wait 30 sec. then turn on the printer
9: Wait for the error message: Printer access door open.
10. Close the printer access door.
11. Wait for the error message: Printhead is missing.
12. Open the access door and put in only the printhead and the close the access door.
13. Wait for the error message: both ink cartridges are missing.
14. Open access door, put in only the black ink cartridge, then close the acess door.
15. Wait for the error message: Color ink cartridge is missing.
16. Open access door, put in the color ink cartridge and then close the access door.

If the error is solved, do a firmwareupdate right now.

You can find it here.

Sep 22, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

3 Answers

Ink cartridges cannot be recognized in canon printer


Hello!
Remove the cartridges and gently wipe the cartridge contacts with a dry cloth, then put them back in. Then, hold the "resume" button for 10 seconds for each cartridge, that should reset them.
If that doesn't work, one of your cartridges (sadly) needs to be replaced.

Apr 15, 2009 | Canon PIXMA iP1300 Printer

1 Answer

Front cover dore open or cartridge missing


Try reseating the ink cartridge and see if the cover door is firmly closed.

Mar 27, 2009 | HP LaserJet 1020 Printer

1 Answer

Cannot print true color.


How do I resolve the error message "Calibration Page Not Found"? Error code: 3610 Question : How do I resolve the error message "Calibration Page Not Found"?
Answer : To resolve this error condition, correctly position a calibration page on the scanner. See the User's Guide for more information. How do I resolve the error message "Cover open"? error code : 3501 Question : How do I resolve the error message "Cover open"? Answer : To resolve this error condition, close the access door. The printer will not operate while the door is open. How do I resolve the error message "Color ink cartridge missing or not installed correctly"? Error Codes : 3511 Question :
How do I resolve the error message "Color ink cartridge missing or not installed correctly"?
Answer :
To resolve this error condition, reinstall the ink cartridge:
  1. Remove the color ink cartridge:
    1. Open the printer access door by lifting from the front center of the unit.
    2. Wait until the printhead is idle and silent, then pinch the latch on the color ink cartridge with your thumb and forefinger and lift it out of the printhead.
  2. Check the two electrical contacts on the ink cartridge for small marks, which should appear if the cartridge was installed correctly.

    If the electrical contacts do not have small marks:
    1. Reinstall the ink cartridge, making sure you press down on it until it clicks into position.
    2. Remove the color ink cartridge, then check the two electrical contacts on the ink cartridge again for small marks. Repeat if necessary.
    3. Reinstall the ink cartridge.
  3. Close the printer access door.

NOTE: See the User's Guide for more information about removing and installing the ink cartridge.
If the error persists:
  1. In the KODAK All-in-One Home Center, select the Help (?) icon.
  2. Select Maintenance.
  3. Select Firmware Upgrade, then follow the prompts to download the latest version of firmware, free of charge.
From Kodak support:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=9104/7269&pq-locale=en_US

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 11, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

I have a cannon mp830 wont print


Solution: Insert one of each color ink tank MP830

New Page 1 More Than One of the Same Ink Tank is Installed When installing or replacing an ink tank, only one of the following ink tanks should be installed. If the ink tank is not installed correctly, an error message will display. mp500_inktankorder.gif
  1. Confirm that the printer is powered on and press the Open button. (The paper output tray will open.)

    mp800_openbutton.gif

  2. Lift the scanning unit (printer cover) completely. (The print head will move to the replacement position.)

    mp500_scanningunit_open.gif

    Note: When the scanning unit (printer cover) is opened more than ten minutes, the print head moves to the right side. If this occurs, close the scanning unit (printer cover), and open it again.

  3. Open the inner cover.

  4. Press on the tab to release the ink tank, then remove it from its slot. If you are replacing multiple ink tanks, make sure to replace one by one.

    05sj00142_01_en.gif

  5. Insert the ink tanks into the print head. Note: Press the mark "PUSH" on the ink tank firmly until you hear a click.

    05sj00141_08_en.gif

  6. Ensure that all the ink tanks are installed properly and the ink tank lamps light red.

    05sj00141_09_en.jpg

    <7> The ink tanks are installed properly.

    <8> The ink tanks are not installed properly.

    Note: Ink Tank LampYou can check the status of each ink tank according to the way its lamp flashes.
    • - On: The printer is ready to print.
    • - Slow flashing (at about three second interval): Ink is low. Prepare a new ink tank.
    • - Fast flashing (at about one second interval): Ink tank is empty, or the printer is not ready due to an error.
    • - Off: An error has occurred and the printer is not ready to print.

  7. Close the inner cover and the scanning unit (printer cover). Note:

    mp500_innercover_closed.gif
    • When closing the scanning unit (printer cover), be careful not to jam your finger.
    • When starting printing next time, the print head cleaning launches automatically.

Jan 18, 2008 | Canon IMAGERUNNER 6570 Copier

3 Answers

Printer cover open error message


I had that problem too.

Unplug the printer.
Hold the printer cover open while you plug in the printer.
Then wait for the printer to power on while still holding the cover open.
Then close the cover.
The buttons should work and th error message should be gone.

It worked for me.

Nov 01, 2007 | Lexmark X2250 All-In-One InkJet Printer

4 Answers

Inaccurate error message


According to Canon's website:

Details Print Friendly Version Issue: ERROR LCD: More than one ink tank of the following color is installed U071
Solution: Replace defective ink tank (MP500 / MP800)

Replacing An Ink Tank Use the following procedure to replace empty ink tanks or when an ink tank error appears.
  1. Confirm that the printer is powered on and press the <Open> button. (The paper output tray will open.).

    mp500_openbutton.gif

  2. Lift the scanning unit (printer cover) completely. (The print head will move to the replacement position.)

    mp500_scanningunit_open.gif

    Note: When the scanning unit (printer cover) is opened more than ten minutes, the print head moves to the right side. If this occurs, close the scanning unit (printer cover), and open it again.

  3. Open the inner cover.

  4. Press the ink tank's tab (1), then remove it from the slot (2).

    sj403118.jpg

  5. Unpack the ink tank and pull the orange tape off completely in the direction of the arrow and remove the film.

    05sj00141_05_en.jpg

    Note: Tear the orange tape carefully along the dotted line. If the orange tape remains, printing problems may occur.

    05sj00141_06.jpg


    <4> Tape is completely removed.

    <5> Tape remains. Remove the orange protective cap located on the bottom of the ink tank by twisting as shown in the diagram.

    Caution: Do not touch the ink tank contact <6>. Doing so may cause printing problems. Do not squeeze the side of ink tanks as this may cause the ink to leak out. Do not reattach the protective cap once you have removed it.

  6. Insert ink tanks into the print head.

    Note: Press the mark <PUSH> on the ink tank firmly until you hear a click.

    05sj00141_08_en.gif


  7. Ensure that all the ink tanks are installed properly and the ink tank lamps light red.

    05sj00141_09_en.jpg

    <7> The ink tanks are installed properly.

    <8> The ink tanks are not installed properly.


    Note: Click for Ink Tank Lamp indications.

  8. Close the inner cover and the scanning unit (printer cover).

    Caution: When closing the scanning unit (printer cover), be careful not to jam fingers.

    N
    ote: The next printing begins, the print head cleaning will begin automatically.

Ink Tank Lamp indications
You can check the status of each ink tank according to the way its lamp flashes.
  • On: The printer is ready to print.
  • Slow flashing (at about three second interval): Ink is low. Prepare a new ink tank.
  • Fast flashing (at about one second interval): Ink tank is empty, or the printer is not ready due to an error.
  • Off: An error has occurred and the printer is not ready to print.

Aug 14, 2007 | Canon Pixma MP500 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MX310 All-In-One Printer Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1975 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...