Need wiring diagram for Haier hdt18pa - Haier Dishwashers

I had problem like this...one day the washer stopped, still half-full of water. Then, we tried to run again and we could hear the little engine working but it wouldn't let water in OR out, just error beaps.
Then my boyfriend took off the back and gently tapped the water inlet valve solenoid with his screwdriver, and now it works! Starting FILLING actually, not draining, but completed a full cycle finally!
Must have shaken loose a blockage in the mechanics in that solenoid, probably have to replace before long. But for now, success!
Here is a website that helps: http://www.searspartsdirect.com/Haier/dishwasher/model-Esd301-repair/categories/dishwasher-repair/symptom/dish004.html
(See "REPLACE WATER INLET VALVE", half-way down page)

i use rapid program 30 M it is work suddenly 12 MINUTES ITS STOPwater cannot go out side after they make sound10s E4

Hi,

Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems - Water will not drain out

heatman101

I have a haier CPR09XC7 that I need a wiring diagram for

Hi,

That is not that hard to fix and you can easily buy the parts yourself online...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

heatman101

It is draining through the disposal. Thanks.

Click the link, then click the picture of the manual on the page, it will begin loading the manual.

HDT18PA Haier Table Top Dishwasher

There is a filter at the bottom of the tub that has to be cleaned out once in a while. Then it will drain. This should help. It is a plastic looking mesh filter most can be removed and hand washed. Hope this helps.

compactappliance.com has stats on the models they sell.   I think this one's hoses were 4 feet long.