Question about Cell Phones

1 Answer

I have a motorola v9 IMEI:354503010196116 and i entered the wrong security code too many times and now am getting a "contact operator" message. How can i unlock this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Usually it will ask for an PUK or PIN code when it says to contact operator service .

PUK CODE:

PUK code can be given only by your service provider which is specific for each and every mobile number.
Contact your sim customer care department over phone. Its free of cost to get the pin or puk no. If you cant contact through your phone get some other phone and contact them.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software...
Go to the below link and you can confirm that the above procedure works and there is a testimonial given by the customer too. http://www.fixya.com/support/t3079596-sking_puk_code

PIN CODE:

HI If you are asking for pin contact your service provider , he will give you a default pin .

If you try pin more than few predefined no of times your phone will ask PUK code which can also be given only by your service provider which is specific for each and every mobile number . Do not try PUK(new pin code) code many times or else your sim will be blocked and you will need a new sim.

Contact your sim customer care department over phone. Its free of cost to get the pin or puk no.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software..

SECURITY CODE:

If you are talking about the security lock code to enter into the phone then once it is lost nothing can be done except flashing the mobile . Because if anybody can give the security code created then who ever who steals your phone can get into it and get your valuable information.

So as safety precaution to avoid that they have designed it such that if you forget the security lock you have to reset the mobile memory by flashing the mobile at an authorized service center.So while flashing the mobile all the data in the mobile memory will be lost and you can again start using the mobile.

Posted on Apr 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock by imei Motorola RAZR2 v9 Cell Phone


You can get the UNLOCK CODE for Motorola Razr2 V9 at here Classicunlocking.com
and Unlock it from network lock.

Mar 30, 2012 | Motorola Mobility RAZR2 v9 Cell Phone

1 Answer

How to master reset? without security code how to erase all contacts without security code?


ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
Default 6 Digit Security code: 000999 or 1122
Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved
OR:
If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

Jul 30, 2011 | Motorola Mobility RAZR2 v9 Cell Phone

1 Answer

Unlock Network Pin For Motorola AT&T SKU C1681 IMEI 354656029204063


To unlock the Motorola C168I from the Network Lock ,get the Unlock code from here Onlinegsmunlock and Unlock it...
Motorola C168i Unlocking Instructions Warning : Do not enter any wrong unlock codes on your Motorola C168i mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola C168i mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola C168i with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola C168i is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola C168i ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

Jul 10, 2011 | Computers & Internet

1 Answer

I want to unlock my motorola defy can u send the unlock code


Sorry i don't have the Unlock code with me.Also no one provide the Unlock code for Your It's differ from Network to Network ,IMEI number and Country it locked Now...You can get the Unlock code at low cost from the website Named as Superunlockcodes.com and remove the Network Lock,If it asks for Security Unlock code means call the service provider and get it,Subsidy Code and Unlock code is Same,SPECIAL CODE is also same in Motorola Category,Motorola has Unlimited Unlocking tries,,Follow the Free unlocking instructions below :

Motorola DEFY Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Motorola DEFY mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola DEFY mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola DEFY with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola DEFY is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola DEFY ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!
Each Motorola DEFY mobile phone has an unique unlock code. You can buy the unique unlock code for your Motorola DEFY mobile phone using the form above.

May 25, 2011 | Motorola Mobility Defy Cell Phone

2 Answers

My motorola razor v9 is aking me for a subsidy code


You can get the subsidy code through online..........give your IMEI number and get the subsidy code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

Jan 11, 2011 | Motorola Cell Phones

1 Answer

Forgot unlock code for phone unlock cannot get into contacts.


ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
Default 6 Digit Security code: 000999 or 1122
Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved
If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

Nov 28, 2010 | AT&T Motorola RAZR2 V9 Cell Phone - Purple

1 Answer

Motorola v9 subsidy master codes


hi
menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you want

Jan 09, 2010 | Motorola Mobility RAZR2 v9 Cell Phone

1 Answer

Put in sim aske a code wrong then contact operator popped up ?


When you place a new or a existing SIM card from another phone provider into your mobile phone and it asks for a Security code then :-
This phone is locked to the original mobile phone provider. You need to contact this mobile provider to ask for the unlock code (security code) for this phone. You need to provide proof of ownership etc and the phone's unique IMEI number which is located inside the phone under the battery. They use this number to generate the unlock code for your phone.
They should provide you with instructions on how to enter this code into the phone.
Once you unlock the phone, then you can insert a new SIM card in this phone or sign up with another phone provider using this phone.

Nov 23, 2009 | Motorola Mobility RAZR V3x Cellular Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

William Alequin

Level 3 Expert

922 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...