Question about Computers & Internet

1 Answer

I am 74 years old, and building 4 computrs for handi-capped kids in our area. My problem: I have never had this before. I cannot boot anything on any of my pc's, . I have bought replacement parts for all 4. such as motherboards, ram, graphic cards, hard drives,processors, etc. Nothing helps, I'm at wits end.Any ideas? I've even taken working parts from other computets, nada! On social security, I pay for all this and no charge to the kids, sometimes I get donations of cash or parts, right now I just need help and advice !! Power is getting to my keyboard as the lights flicker when I turn it on, but thats it, also lots of vibrations in hard drives and roms,green lights on motherboards. Maybe it's my ex-mother-in-law haunting me from her grave, TEE HEE" If you have any ideas I will put you in my will, ( net worth, about 17 cents, haha) Thanks, my name is Jim email: jreddy43@yahoo.com

Posted by on

  • Joseph Mueller
    Joseph Mueller Apr 11, 2011

    When you say you can not boot anything, do you see anything on the screen when you boot it up? Is there an os on the hard drive? Can you hit either f2 or the del key on boot and get into the bios Settings?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 108 Answers

Have you tried the bios jumpers usualy that helps also try removing ram 1 at atime sorry if this don't i have this prob in the past and bios jumppers usualy work should be somewhere near bios batt

Posted on Apr 11, 2011

  • jreddy43 Apr 11, 2011

    I have 13 boatds taht have this problem!!

  • jreddy43 Apr 11, 2011

    I finally got my power switch working and wiring hooked up. Now my processor fan works, and I can turn it on and off from the front. still nothing on my screen. I've tried 15 hard drives and 26 graphic cards, 14 different power supplies, 32 sticks of ram, bench tested and in 8 towers, 6 keyboards, 18 processors, 10 heat sinks and fans, lost count on bad words, (lol), and I'm still looking at black screen on monitor, oh yeah, 5 monitors and miles of ribbons ( cables). Can't get bios, or anything to come up on screen! I tried parts deom working pc's now they don't work either?? Crazy huh? Let me know if you think I'm crazy (tee hee) but I have others trying to help me here. This has broke me,sorry I can't send you any money at this time, Once a month ssa. Thanks for loaning me your shoulder tonight, JIM

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will an old piece of !!!!! "": dodge 1973 tioga moterhome be able to produce a trouble code for its major malfunctions ????


Are you kidding? Only if it was altered by IBM, maybe. Your first impression was accurate- it's straight mechanics from thereon. I believe Chrysler was the first to come out with electronic ignition in the early '70s, and that was a major step. You know, before that was the old mechanical breaker points sets. Ford played catch-up for years, first with a transistorized ignition (partially electronic ignition) for '74 & '75 or '75 & '76, and then arranging and re-arranging the duraspark ignition system, until engine computers in the early '80's. And that is so with your dodge, I believe: there were no engine computers in '73. Pretty much old style mechanics. I'd say you were lucky, except I know what gas guzzlers those things were !

Jul 21, 2014 | Cars & Trucks

1 Answer

Do you need to update the gps at all


The only thing you need to do (maybe) is to update the maps. make sure its maps cover the region where you will be traveling, otherwise it won't be of any help. Since roads do change over the years it is possible that your map may be inaccurate somewhere. If you are unlucky to find yourself in such an area, an old-fashioned road atlas or an area map might come in handy.

Feb 13, 2014 | ACR Maylong Group FD-220 Car GPS Receiver

1 Answer

Dewalt D51822 nail gun does not fire nail. When trigger is pulled air can be felt coming from the trigger area. I have replaced the trigger valve assembly and it had no effect. Gun is about 3 years old...


There are 4 orings that cause this problem. Two are in the trigger valve installed on the firing pin. The firing pin can be seen just under the trigger, however if you replaced the valve, you could assume no problems with the trigger valve. I would take apart the old trigger valve and examine the orings on the pin. The pin should fit snugly in the trigger valve cap and also in the valve. If the orings look good and it does fit snugly, most likely valve is still good. The other two orings to suspect are installed on the cylinder inside the nailer and make contact with the bulkhead (white plastic piece that seals the cylinder note parts reference 55, 74, 11 on the parts list). For parts list and to order parts go to www.toolpartsdirect.com Good luck with your repair.

May 26, 2011 | Dewalt D51822 Clipped Head 2Inch to...

2 Answers

I am 74 years old i have a atari with 4 games ie space invaders ect is it worth anything to a collector or yourselves i am interested on your veiws peter


Hi.
Yes, your video game system is indeed worth money.

Depending on if you still have the original boxes and stuff for the game system, this could be worth $200 or more!

I have seen the machine by itself on eBay, without game cartridges and they still are asking $100.
And this is without the boxes.

So as you can see, old doesn't mean not worth anything.

I hope this helps you out, and have a good day !

May 26, 2011 | Atari 2600 Console

1 Answer

2009 HUMMER H3 HOW DO YOU SET THE CLOCK


the same way you do on any other car. you pull the owner's manual out of the gloevbox, hand it and a five dollar bill to a 14 year old kid. he looks up the instructions and sets your clock. keep his phone number handy as you will need it twice a year forever.

Mar 28, 2011 | 2008 Hummer H3

1 Answer

I have a 15 year old Zenith console, SL2737RK, lost vertical defl


You need to resolder the vertical IC and replace any electrolytic caps in the same immediate area. If you can find someone with electronics experience they know what I'm saying....It can be repaired.

Sep 24, 2009 | Televison & Video

1 Answer

Older Frigidare Elite Dryer conversion


You'll have to contact Frigidaire to see if a conversion kit is available. Normally, it's just an orifice replaced on the gas valve.

Feb 18, 2008 | Frigidaire GLGR341AS Gas Dryer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...