At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I'm currently trying to repair a Medion cybermaxx MD41349, But the laptop doesn't turn on (boot/reboot) 100% of the time. only rarely it will turn on as normal. How do i cure this? without paying?
It's a Mobile Intel(R) Pentium(R)
3.20GHz
448MB of RAM
& i hate it! :)
Regards.
Re: I'm currently trying to repair a Medion cybermaxx...
Have u checked your power supply and the plug in port if loose needs sodering somtimes its the power pack shorting out if its the board ebay has replacements for around 40-50 dollars..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
suspected your mainboard is overheated, call the service center for replacement board if your laptop is still under warranty, or you need to send for the hardware repair
Unplug, remove battery, Remove and reseat Memory Mods, try to reboot. If no, Remove HDD and test, replace if necessary. Has their been any damage? Dropped?
run the check disk utility. To run the check disk utility you will need a repair disc ora operating system disc. Put the disc in the cd drive and boot fromit. You want to get to the Dos Command Prompt (Black screen with whiteletters) and type the following command: chkdsk /r Check disk will run well over an hour or two and you will notice thepercentages going from high to low, this is normal. Let it run tocompletion. Then reboot machine.
If check disk fails to solve your problem you might have to reinstall windows.Try doing a Repair Install that way you don't loose your data, documents,music, pictures, videos or programs.
In windows xp you get to the dos command prompt by selecting R for repair whenthe options appear.
In Vista and Windows 7 you want to get to the recoveryconsole and look down at the bottom of the window for the Dos Command.
Turn it over and start unscrewing screws. But you'll also have to remove the lcd screen, keyboard, palmrest and motherboard to actually get the whole back off.
Do you have the original installation disk that came with the computer? You can try to boot from that CD and do a repair installation. The Cyclic Redundance Check (CRC) error refers to the media the computer is trying to access (either the CD or the hard drive). Try booting into Safe Mode (reboot and press F8 repeatedly until you get a boot menu). From Safe Mode run a checkdisk (chkdsk from command line) on the hard drive to find and repair any found disk issues.
You need to get to the Bios through setup (F2) Change boot configuration to boot from CD Rom. Using your Windows Setup disc,Reboot,press R to get to recovery console.From there you can rebuild your boot configuration.
You need to remove all the screws from the back also, then remove the cover to the rear on the bottom and remove the wireless card (make note as to connection colours) and there is 2 (I think) screws under there, then one also under the battery, then the whole top opens up.
Make sure you have removed all screws from the bottom case, including the four under the rubber feet at the rear.
This was the most awful laptop I have ever worked on!
×