Question about Denon AVR-3802 Receiver

1 Answer

3802 shuts off

During dvr and dvd playback, my 3802 will shutoff and one red light will flash. I hit the off button and the then the on button on the remote and it comes back on? It seems to be particularly a problem with low or abrupt crash sounds.

Posted by on

  • lerxst9 Aug 10, 2008

    Hi!

    The receiver is brand new (1 month), and this never happened before. Yesterday, when watching a DVD (my DVD player is another Denon) at one point in the concert (volume was set to -15 dB) the receiver powered-off automatically. A typical symptom when the device is overheated, but this was not the problem, since I reproduce the situation early morning today (with the receiver cold) and it powered-off again. Limit (volume) is set to "off". I think there problem is related to a peak volume (although low), but don't really now what's going on.



    I hope you can send any feedback to me, regarding this matter.



    Thanks in advace,

    Rick

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 682 Answers

1-speaker terminal are short circuit-turn power off and connect speaker terminal properly.
2-ventilation holes are closed--turn it off and make good ventilation around and leave it to cool down and then turn it on.
3-the unit is operating in high power condition turn it off and leave it to cool down and then turn it on.

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does blue light keep flashing when my HMDX boom box is turned on


clip_image002.jpg if it is a slow flashing that means it is connected
if it is a fast flashing that means it is pairing
4d93f321-08ac-45e4-9e2e-bb627f3dc9ef.jpg

Jun 01, 2014 | Audio Players & Recorders

2 Answers

Red light wont turn off on auvio headset


While your headphones are charging press and hold the call button and volume up button and your problem is solved.

Mar 22, 2014 | AUVIO Bluetooth Headphones

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

2 Answers

Iphone won't find auvio device


Your iPhone might not find the headphones if they have been previously been used with another devices. I recommend holding the call button for 3 seconds until the blue light flashes and your iPhone might find them.

Mar 06, 2014 | AUVIO Bluetooth Headphones

2 Answers

How do i pair HP500BT with device


After charging, turn on headset by pushing the power button until the charging led turns red and flashes. continue to hold the button until the light flashes red and green. Go to your phone or device bluetooth settings page and search for devices, it should show up as TPRO HP500BT. Select device and select to Pair with this device. The light should start flashing red really fast, then it should be paired!

Dec 28, 2013 | Technical Pro HP500BT Wireless Bluetooth...

3 Answers

Flashing blue light


1. turn it off2. hold centre button until blinking blue and red3. briefly press volume down4. turn it off= fixed :)
From Sennheiser UK:http://www.sennheiser.co.uk/uk/home_en.nsf/root/contact_menu_technical-question_telephone_headsets_faqs_mm400_series_bluelight

Jun 19, 2012 | Sennheiser MM 550 Wireless Headphones

2 Answers

Backbeat 903 I tried to pair them but they don't with my g1


1. turn off the headphones
2. turn on bluetooth on g1
3. hold down the power button on headphones until u see the red and green light flash back and forth. (may take 8 seconds or so)
4 search for devices on g1
5. pair them. if it ask for code it... 0000 (4 zeros)

Nov 16, 2009 | Altec Lansing Audio Players & Recorders

2 Answers

Can't get my computer to discover my s9 headphones. There are no other BT devices connected. The blue light is on...


What bluetooth adapter are you using on your computer? Get the manual for the S9 from the Motorola web site: it will tell you that the blue light is related to mono voice/microphone, and flashing green is all about stereo musioc, no microphone. 
So what are you trying to do with your S9?
On your computer it can be hands-free, or a stereo headset. It has two personalities, and you should see the two modes in your bluetooth configuration screen on the PC.
From what I see in the Motorola manual, if you click the right ear button for "Play/pause" it is supposed to kick the headset into A2DP stereo playback. 

Mar 04, 2009 | Motorola Mobility S9 Headphones

2 Answers

I didn,t get instructions with plantronics 230 blue tooth. how do you operate it?


First, make sure it is fully charged, then once it is charged, hold the button down until the light flashes fast, and it may stay on after that. Go into your phone, and Bluetooth menu. New device, or whichever your phone says. Have it search for your bluetooth in range, and once it does, the pass code should be 0000. After that click pair, and it should match them up.
Good Luck, hope this helps.

Nov 19, 2008 | Plantronics (43-1960) Headphones

Not finding what you are looking for?
Denon AVR-3802 Receiver Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Dennis McCollum

Level 2 Expert

137 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6393 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...