Question about Televison & Video

1 Answer

I do not have the tv remote and can not get the "video:1" to disappear from the top right of the screen when I have the cable turned on. Any suggestions?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 346 Answers

Greetings Cray - You didn't specify which TV or Model you have. Most TV's have a group of manual controls, on newer TV's usually on one side, which allow you to perform most functions without the remote.

One of them is is usually labeled INPUT or DEVICE. If your TV has such controls and you push the button until it comes around to the TUNER input the video:1 should disappear. Of course if you're using a cable box connected to the TV you would want to go to HDMI or COMPONENT, depending how your TV is connected to the cable box.

Good Luck and Thanks for using Fix Ya

Mikeywaf

Posted on Apr 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi , on my Sony Bravia it states "Calble " with an icon in Black in the top left of the TV screen when watching SKY. Is there anyway of getting rid of this text or icon? Thanks Nick


Hi,
Press Info/ Display button on tv remote once, on-screen display will disappear.
Only Sony tv remote will work for that, no other universal remote will close on-screen display.
Thanks.

Nov 21, 2010 | Sony Televison & Video

Tip

Television factory resets


Factory Resets / modes

For all listed procedures, start with TV on, in TV mode, unless otherwise instructed. After procedure is complete, unplug set and re-plug in to finish reset.

If more than one procedure is listed for a given manufacturer, try the different ones until you see which one works for your set.

Coby:****************************************-

Enter menu, hi-lite "audio" then enter 8893

mode/source 2580 select "other setting",select "shipment" then yes, after it exits service menu you need to power set off.



Dynex ****************************************-

source/input 2580

hold vol down on tv and hold #1 button on remote, vol will jump to halfway and set shuts off. Turn back on have 1st time setup screen.

source/input 2580

menu 1999 (tv is on)



Element ****************************************

menu 0000

menu 1147


Haier ******************************************

pull up menu, hi-lite "audio" then enter 8893




Hisense *****************************************

In customer menu go to"Parental" enter 0000 then select"Clean All" then power the set off and back on and first time setup menu will be there.

For some models, same as above model except in menu it is labeled "Lock"



Insignia *****************************************-

input 2580 (tv is on)



Mitsubishi ****************************************

Menu 123 or menu 2470 (tv is on)



Panasonic

Hold vol- on TV, press and hold menu button on remote



Philips ******************************************

Push menu, select"Features"then select"current software info" push 062596-info on remote then push info again then red"initialize appears and changes color then complete. Push power button to exit

TV is on,push 062596-info on remote,then push info again, red"initialized"appears it turns green when completed, then push power button to exit

Polariod *****************************************-

Hold vol- and chan- or hold vol+ and chan+ (tv is on)



Proscan ******************************************

In customer menu go to setup,select parental control menu, enter 0000 then select "clear channel list".



RCA *******************************************-

Menu 1147



Sanyo *******************************************

hold vol down on TV, press and hold #1 button on remote, vol will jump to halfway and set shuts off. Turn back on have 1st time setup screen.



Samsung *****************************************-

Mute 182 power (tv is off)
(On some models, Factory Reset is on this menu, on some, you must go into the "Options" submenu



Seiki ********************************************-

Menu 0000



Sharp ********************************************
(Note - On Sharp models, you will need to look through the menus to find the reset option)

menu 1999

menu, 3481

menu 1147

while holding vol- & input buttons on tv plug in set when "k" appears push vol- & chan-



Sony *********************************************

Hold "arrow up" on remote and push power button on tv (tv is on)




Symphony *****************************************-

Source/input 2580




Toshiba ******************************************-

on Menu, select "Installation", then "System Information" press the right arrow button, ("System Information" will change to "Factory Reset" or something similar) follow on-screen instructions



Vision Quest ***************************************-
Source/input 2580



Vizio ********************************************

In customer menu under "Help" tab is Factory Default enter 0000

Vestel (most):
Menu 4725 then select "RESET"

Samsung (European):
Power off, Info - Menu - Mute - Power, then find factory reset and execute option.

LG/Zenith:
Hold MENU on TV and MENU on remote for 5~10 seconds, then select reset option.

NEC:
While powering on hold "MENU" or "INPUT" on TV, depending on model. (Only disables error lock out/buffer and puts TV in temporary service mode.)
To reset to factory, on remote, Off Timer - Menu - Exit - Off Timer, then select reset option.


Vizio Service Menu Method 1
1.Turn The TV off.
2.Press and hold the {CH +} & {CH -} buttons on the TV.
3.Then press and release the {POWER} button on the TV.
4.Release the {CH +} & {CH -} buttons.
5.Now press the {MENU} button on the remote.
6.You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This is for factory).
7.Press and hold the {MENU} button for few seconds.
8.The Service Menu will be displayed.
Vizio Service Menu Method 2
1.Turn The TV off.
2.Press and hold the {CH +} & {CH -} buttons on the TV.
3.Then press and hold the {POWER} button on the TV.
4.Keep all three buttons pressed for few seconds.
5.Now press the {MENU} button on the remote.
6.You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This is for factory).
7.Press and hold the {MENU} button for few seconds.
8.The Service Menu will be displayed.
Vizio Service Menu Method 3
1.Press and hold the {EXIT} button on the remote for 3 seconds then release it.
2.Then press the {1} {2} {3} buttons on the remote.
3.To exit, press the {EXIT} button.
-------------------------------------------------------------------------------------------------------
GV42L FHDTV10A / JV50 / SV42 / SV320XVT / SV370XVT / SV420M / SV470M / SV420XVT1A / SV470XVT1A /
VECO320L1A / VO22L / VO32 / VO37 / VO47L / VOJ320 / VOJ370 / VP322 / VP42 HDTV20A / VP422 / VS420LF1A /
VU42 / VW32 / VW37 / VW42 / VX20 / VX32 / VX37 HDTV10A /VX42

Push "Menu" on remote and then push "Vol-" and "Input" on keypad

GV46 / P50HDM / P50HDTV10A

Press "Ch-" and "Ch+" buttons together once on keypad

GV42 / L42 / VP42HDTV10A / VP50 / VX37

Press and release "Menu" on keypad. Hold "Ch-" and "Ch+" buttons on keypad, then hold "Menu" on remote.

P42

Hold "Ch+" and "Ch-" along with "Power" on keypad. OSD will show "F" on right bottom portion of OSD.

VM60P

Press "Info" on remote, then press "Right Arrow," "Down Arrow," "Left Arrow," "Up Arrow," "Right Arrow."
The TV will show "Enter Factory Mode." Press "Menu" after message disappears and go do to "Setup."

GV47

Press "Menu" then press the following combination: "Info," "8," "2," "0," "6."

SV420M / SV470M / VF550M / VF550XVT1A / VF551XVT / VL260M / VL320M / VL420M / VL470M / VO320E /
VO320EP8 / VO370M / VO420E / VP504 / VP505

Press "Menu," and then press "2," "4," "8," "9."

SV420M / SV470M / VF550M / VF550XVT1A / VF551XVT / VL260M / VL320M / VL420M / VL470M / VO320E /
VO320EP8 / VO370M / VO420E / VP504 / VP505

Press "Menu," and then press "2," "4," "8," "9."

VA19 / VA22LF / VA220E / VA26

Press "Menu" and then press the following combination: "0," "6," "2," "5," "9," "6"

VA320E / VA320M / VA370M / VT420M / VT470M

Press "Menu" and then press the following combination: "1," "9," "9," "1"

VW22 / VS370E

Press "Mute" once OR "-" twice (the dash next to the "0") and then press the following combination: "9," "8," "7," "6"

----------------------------------------------------------------------------------

Main Page

on Apr 23, 2015 | Televison & Video

Tip

How to Fix a Polaroid LCD TV Screen


<p>A Polaroid LCD TV delivers its picture via DVD player or cable connection to your home or office. After setting up your device and using it, you might experience technical difficulties with power loss and picture quality. Navigating through a few steps of self-maintenance will have your Polaroid TV running smoothly again in little time. You can examine your TV's power cord for damage, rewire a DVD player connection, and adjust your Polaroid's backlight.<br /> Difficulty:Moderate <span>Instructions</span> <ol> <li> <ul> <li> <span></span> Turn your Polaroid around so that the back is facing you, as a first step in correcting a power loss issue. Examine the length of the power cord from the back panel of the Polaroid to the wall outlet for damage, such as tears or rips. Replace the cord, if you see damage. Unplug the TV from the wall outlet and inspect the metal receptors (prongs) for dirt. If the prongs are dirty, clean them with a dry cleaning cloth. Plug a separate electrical device into the outlet and turn it on to confirm that the outlet is performing correctly. Plug the Polaroid TV back into the outlet, and try again.<br /> </li> <li> <span></span> Twist the Polaroid TV's back panel towards you so that the connected cables and jacks are easily accessible to you. If you're experiencing problems getting a picture from your DVD player, inspect the connection of the audio/video cables to your "Composite In" jacks. There are three cables in a standard audio/video setup: a yellow cable, a red cable, and a white cable. Unplug all three cables from their jacks to reset the connection. Insert the yellow-tipped cable into the "Video" port, which is yellow-colored to make matching the cables easier. Insert the white-tipped cable into the "L" (left audio) port and the red-tipped cable into the "r" (right audio) port. Perform the same steps on the audio/video cable out ports of the DVD player, and try again.<br /> </li> <li> <span></span> Raise the TV's backlight level, if you're having trouble seeing the picture. Push the "Menu" button (located on your remote control), and the TV setup menu will appear. Use the navigation buttons located on your remote control to scroll to "Image," and push "Ok" -- located within the navigational buttons on your remote control. A list of options will be displayed, such as "Contrast," "Hue," and "Saturation." Choose "Brightness" from the options. Use the four-way navigation buttons to raise the brightness (make your screen brighter and more illuminated) or lower the brightness (make your screen darker).<br /> </li></ul> </li></ol>

on Dec 27, 2010 | Televison & Video

1 Answer

On the TV screen it displays "VIDEO 5" I can't get it to go away. I have misplaced my Sony remote and only have the cox remote control. I hope you can help us. Margie


Only Sony tv remote will work here to disappear onscreen display.
Have Sony tv remote and press INFO/ DISPLAY button once, on-screen display will disappear.
No other remote will work for that.
Thanks.

Nov 08, 2010 | Sony BRAVIA KDL-40S2010 40 in. LCD...

2 Answers

Our son pushed some buttons, and now we cannot get rid of the square in the upper right corner that says "video 2". HELP!


Hi,
Video-2 is on-screen display. Press Display/ info button on tv remote, on-screen display will disappear.
Please note that only Sony tv remote will work to cancel on-screen display.
Thanks.

Jul 28, 2010 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Sony dvp-ns425 player has the word VIDEO in upper right corner appear and disappear every 20 seconds or so. It is in the same green block letters as all the menu/control titles so I know it is from the dvd...


That word Video in green color could be TV's on-screen display as DVP-NS425 has another kind of on-screen display that has track info, time info etc in display.
Please press Display on TV remote to turn off that green color Video on-screen display at top right corner.
Thanks.

Sep 13, 2009 | Sony DVP-NS425P DVD Player

1 Answer

I have a Sony Trinaton XBR about 6 years old. Works great. Have Comcast cable and they recently installed a new cable box. Now I get all cable channels on "Video 6 - DVD" rather than "Video 7 -Cable Box"....


Hi,
I was awaiting your response in chat session but could not get any thing.
Please hook cable box in Video input-7 instead of Video input-6 in TV and select Video input-7 with remote on TV.
Regarding continues on-screen display of video-6, press Display button on TV remote once, on-screen display will disappear.
Thanks.

Jul 12, 2009 | Sony Televison & Video

1 Answer

Video Input Label Displayed Constantly


Hi,
You need Sony TV remote and press Display button and screen display (green label) will disappear.
Regards,

Aug 26, 2008 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Sony trinitron wega KV-XR TV


Activate / de-activate by pushing display button on any Sony
remote control........................T.

Jan 07, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...