Question about Garmin nuvi 1300 Car GPS Receiver

1 Answer

I cannot do a soft or hard reset the Screen prompt comes up with"Loader Loading...", I can do nothing?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 464 Answers

Hello,

Are you able to hook the unit up to the PC via USB, if you are able to get it into mass storage mode i would try giving the unit an update using Garmins WebUpdater Software. Here. If you are unable to connect it to the PC you may have to send it in for warranty or repair. And just to be clear when doing the hard reset are you powering down the unit and holding the bottom right corner on the touchscreen and then turning the GPS back on with your finger still in the bottom right position?
Be sure that the hard reset cannot be done before you send it away for warranty or repair.

Hope this helps!

Posted on Apr 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Garmin GPS - stuck , not updating, no signal problems, update maps


If your Garmin GPS is stuck on a loading screen, not updating properly, not acquiring a signal or having other quirky problems. You can follow the steps below to help resolve some of these issues.

In order to update the firmware on your Garmin GPS device you will need a USB cable and Garmin's WebUpdater software. You can find the update software from the following link below,

Click here for update software

Click here for map updates

To update your firmware through the WebUpdater software, you want to turn off your GPS device, plug it into your computer. Run the WebUpdater software then turn on your device. If the software does not list your GPS then click the "Find Device" button.

g33k4u_3.jpg



Updating the maps can resolve issues with missing streets, or the unit being off entirely(roads are updated throughout the world on a constant basis). Keeping your software up to date is always recommended.

Firmware upgrades will help resolve issues in the operating software, and may even help GPS problems you are experiencing. If not, you can perform a soft reset. As a last resort, you will want to perform a hard reset below.

Perform a hard/soft reset
A hard reset will reset the device back to factory defaults. This will also delete any of your personal favorites saved on the device.





Garmin Nuvi


Soft Reset

Slide the power button to the left and hold in this position for 8 seconds. Push the switch to the right to power the GPS back on.


Hard Reset
Turn the unit off. Press and hold the bottom right of the GPS screen. Continue to hold while powering on the GPS. you should now have a prompt asking you to erase all data. Select Yes. Afterwards, it is recommended that you leave the GPS outside somewhere safe to acquire a GPS signal. Once this is done, you can update the GPS using the update steps described at the beginning of this article.


-G33k


Be sure to check out some of my other Tips and Tricks articles by clicking here. I have articles on internet issues, computer problems, connecting video game consoles to a network, router issues and more!!





Keywords

Garmin GPS stuck, Garmin software update stalled, Garmin reset, Garmin hard reset, Garmin soft reset, Garmin updates, Garmin firmware, Garmin stuck on loading screen, Garmin no signal, Garmin not updating

on May 15, 2011 | GPS

Tip

How to Hard Reset an iPhone


<p>Owners and users of the Apple iPhone generally report loving the phone, but they also report frequent lock-ups where the screen suddenly freezes or goes black altogether. Some report success solving the problem with a soft reset or the holding down of the sleep/wake and home buttons for the 10 second reset requirement. If this does not work, a hard reset is required to bring the iPhone back to life.<br /> <br /> <span>Instructions</span> <ol> <li> Update iTunes to version 7.4 or higher from the Apple website if you haven't already. <li> Connect the iPhone to your PC. You are automatically taken to the sync management page, and iTunes automatically begins syncing, or copying/backing-up the calendars, <a href="http://www.ehow.com/internet/">Internet</a> bookmarks, contacts and e-mail accounts stored on the iPhone. Sync everything on the phone or pick and choose from the menu you're given. Sync everything on the iPhone you don't want to lose, because a hard reset restores the iPhone to its original state and all data added since it was first taken out of the box is lost. <li> Go to the "Summary" tab at the top of the screen and select "Restore" from the drop-down menu. <li> Wait as the iPhone hard resets. The iPhone comes back up in it's original factory state and a prompt appears asking if you want to restore data settings. <li> Select "Yes" to restore the synced data to the iPhone.</li></ol> <br /> <br /> <br />

on Mar 02, 2011 | Cell Phones

1 Answer

How to reset blackberry7290 its pop up on the screen error reset 532 when i push the scroll before its operated im on the mood of exploring the phone i change the language from english i turn to portugues...


To resolve this issue, first perform a hard reset.
A hard reset involves physically removing the battery from the smartphone and then reinserting it. To perform a hard reset, complete the following steps:
1) Remove the battery cover from the back of the BlackBerry
smartphone.
2) Remove the battery, and then reinsert it after a few seconds.
3) Replace the battery cover.
If this does not resolve the issue, the BlackBerry® Device Software must be re-installed.
Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps:
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps:
1) Open BlackBerry Desktop Manager.
2) Click Help
3) Select About Desktop Manager.
4) Click the Device Software tab.
5) Verify that the BlackBerry Device Software displayed is the latest
version currently available from the wireless service provider.
The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding.
1) Connect the BlackBerry smartphone to the computer and open
BlackBerry Desktop Manager.
2) Double-click Application Loader.
3) Click Next to start the installation process.
4) Type your BlackBerry smartphone password, if prompted, and click
OK.
5) Select the check boxes next to the names of the applications to be
loaded, and then click Next.
6) Click Settings, and then select the check boxes beside Delete all
application data and Erase all currently installed applications.
7) Clear the check box next to Backup up device data automatically
during the installation process.
8) Click Ok > Next > Finish.
9) When the process has completed, the message The loading
operation was successful will appear. Click Close to return to
BlackBerry Desktop Manager.
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following:
1) Click Advanced , and then select the check boxes beside Erase all
application data and Erase all currently installed applications
2) Click Next.
3) Select the check box next to Do not automatically backup the
application data during the loading process (if prompted).
4) Clear the check box next to Backup and restore applications
installed wirelessly (if prompted).
5) Click Next > Finish.
Note: The BlackBerry smartphone will not show a Connected state in the BlackBerry® Desktop Manager. Proceed to open and run the application loader tool.
If BlackBerry Desktop Manager cannot connect to the BlackBerry smartphone, perform the following steps:
1) Remove the battery and run loader.exe from C:\Program
files\Common Files\Research In Motion\AppLoader.
2) Remember to reinsert the battery after the loading operations begin.

Oct 24, 2009 | RIM BlackBerry 7290

2 Answers

App error 523


On the BlackBerry smartphone, the following error message appears after pressing the mute button, accessing an application, or performing a hard reset:
523 app. error. Reset.

To resolve this issue, the BlackBerry Device software will have to be reloaded.

Note: The BlackBerry smartphone will not show a Connected state in the BlackBerry Desktop Manager. Please proceed to open and run the Application Loader.

Jun 29, 2009 | RIM Blackberry 8310 8320 8330 Curve 8100...

1 Answer

Palm centro wont boot


Do a reset. You will lose all items on you device.
Take battery out. Put it in and hold the power button on till you see the palm logo the second time. Release when you see the 2nd logo. It will prompt you for pressing up to delete and reset. Press Up. It will take some time to reset and reformat but please wait. 
After that your phone should come to the setup screen. I would hotsync after you setup to get your contacts  back.

Apr 25, 2009 | Palm Treo 500 Centro

1 Answer

My phone doesn't want to turn on!


First make sure your phone is fully charged. Then check...
It may be the storage card - if you take the storage card out it will boot up and you can put it back in. - pain in the a## but it may work. Or Try taking the SIM card out, boot it up, turn it off, replace the card, and turn it on again.
Last resort is a hard reboot. If you did a hard reboot and nothing happened then you did not do it successfully. To do a hard reboot.

- with the phone powered off
- press the two soft keys, yes the left and right soft keys which are the two dash keys labeled - -
- while keeping it pressed, press the power button down
- keep the power button pressed down for 1 - 2 seconds and then release the power button while still holding down the two soft keys. Keep holding down the soft keys until a black screen appears and prompts appear
- now release the soft keys and follow prompts
- if you dont see the black screen with the reset option, pull the battery out, reinsert it and repeat the above steps
- when you see the black screen with the reset option, press the Send button to confirm the reset.

Nov 04, 2008 | T-Mobile Dash Smartphone

3 Answers

Frozen screen and it says loader loading


just bellow wher it says Garmin there is a small notch...using flat screwdriver take the silver plate off...reset button on right.

Oct 24, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Nothing happens on my dash


First make sure your phone is fully charged. Then check...
It may be the storage card - if you take the storage card out it will boot up and you can put it back in. - pain in the a## but it may work. Or Try taking the SIM card out, boot it up, turn it off, replace the card, and turn it on again.
Last resort is a hard reboot. If you did a hard reboot and nothing happened then you did not do it successfully. To do a hard reboot.

- with the phone powered off
- press the two soft keys, yes the left and right soft keys which are the two dash keys labeled - -
- while keeping it pressed, press the power button down
- keep the power button pressed down for 1 - 2 seconds and then release the power button while still holding down the two soft keys. Keep holding down the soft keys until a black screen appears and prompts appear
- now release the soft keys and follow prompts
- if you dont see the black screen with the reset option, pull the battery out, reinsert it and repeat the above steps
- when you see the black screen with the reset option, press the Send button to confirm the reset.

Apr 03, 2008 | T-Mobile Dash Smartphone

3 Answers

Hx2750 Touch screen


you said you tryed soft and hard resets..

Check the bootloader if it has a diagnostic function, my HTC model has many self tests build in the bootloader, so give it a try on yours.

Boot Loader Hold down the left, second from left and second from right buttons whilst pressing reset button


waiting for your reply.

Dec 23, 2007 | HP iPAQ H1940 Pocket PC

Not finding what you are looking for?
Garmin nuvi 1300 Car GPS Receiver Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

TO Lady

Level 3 Expert

638 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...