Question about Motorola Televison & Video

1 Answer

I HAVE A MOTOROLA DCT3416 i THAT HAS BEEN UPDATED WITH ROVI PASSPORT 3.5 AND WILL NO LONGER POPULATE THE GUIDE, CHANGE CHANNELS WITH THE CHANNEL UP/DOWN BUTTONS OR FUNCTION AS A DVR, HOWEVER I CAN DIRECTLY ENTER CHANNEL NUMBERS AND I CAN PAUSE ETC CHANNELS THAT I AM WATCHING. CABLE COMP[ANY HAS REPROVIONED THE BOX TO NO AVAIL. WHAT CAN I DO? CAN THIS BE FIXED? SOMEONE HAS SUGGESTED THAT IT MAY BE THE HARDDRIVE IS THAT POSSIBLE?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 192 Answers

WHY ARE YOU SCREAMING?

Nope, not the hard drive. you wouldn't be able to pause at all. Its your remote...
try simple things like checking to see if your in the right mode. (what lights up on your remote when you push buttons?)

IMO if you swap the box you will have the same problem. try a different remote... maybe one from another room.

good luck

Posted on Nov 14, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Digivox DV3 cable box

press edit and go to bottom selection system instilation, press ok. type in 1004 on remote, nothing will appear till last digit entered. you will now see a hidden menu. there are three selections go to the bottom one and highlight, to the left another box says off use the right button and it will change to on. press exit till you come back. Go to sky movies or sport and a few minutes later you will see a box updating data, let it update and a picture will apear, all the pictures are now unscrambled. worked ok for me.

Posted on Aug 31, 2008

  • 1 Answer

SOURCE: Tivo won't change my TV Channels anymore with direct cable

I re-did the guided setup in the Tivo under Messages & Settings/Restart-Reset System/Restart menu section in Tivo. Once I did that, it cleared this issue, even though I didn't have to change any of my settings thru this guided setup. I tried a reset alone first, but that did not fix it. Only this fixed it. We had lost both power and cable during a recent tree fall in a storm, and when both were restored, this problem started. I have a cable coax directly in the back of the TV (no cable box/IR etc) and the system is on a home wireless network. I actually have 2 identical Tivo's in the house set up the same way but only one had this problem. The other worked no different after the outage.

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: TIVO DVR : Won't Change Channels

Set up your infrared blasters connected from your IR port on the Tivo and by placing the two lead lights in front of your cable box so it (the cable box) can read the signal.  Then go to Channel settings accessed through Tivo Central and follow the questions. It will ask you to change channels until the remote is working correctly.  This all worked on a different "input" on my Mitsubishi TV (it has multiple inputs.  I have the cable input on a different "input" to make it work.  Hope this helps.  Call TIVO tech assistance because they are the ones who talked me through this.

Posted on Jan 15, 2009

  • 1 Answer

SOURCE: motorola cable box remote codes

I have a panasonic dvr.. had the same problem. you can't go through the cable box to the dvr, you have to put in a splitter and have the cable feed it directly.

Posted on Mar 31, 2009

  • 1 Answer

SOURCE: Comcast Remote requires 3 digits be entered to change channels

l. Push the "Menu button"
2. Push the "Menu button" again
3. Scroll to "Setup" and push "OK"
4. Scroll to "Guide setup" and push "OK"
5. Scroll to"No Auto Tune"
6. Click on arrow next to "No Auto Tune". This will change it to "Auto Tune".
7. Now exit, or just punch in any channel number.

You should now be able to go directly to a channel without entering zeros.

Posted on Apr 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Channels for roku are displayed but cannot control them remote is frozen


YouTube update: Channel now available to all current ...

https://blog.roku.com/.../youtube-update-channel-now-availab...

Roku, Inc.Apr 22, 2014 - It's not got all of the new channels, but its still got everything I originally... I bought in 2011 has a broken charger cable and the no longer make them. .... i can'tsee my youtube playlists on roku tv .... just subscriptions, ... In Linux, I use a Roku remote controller script written in Bash to control my Roku XS, and ...

Roku Forums • View topic - New Roku 3, Remote not pairing

forums.roku.com/viewtopic.php?t=57520

Jun 14, 2013 - 15 posts - ‎11 authors
Just received my new Roku 3, well about 2 hours ago, and still can't get the remote to pair. ... I have changed the wifi channel 9, who knows, but I tried that. ... flash, theRoku device then displays a remote with a wifi signal icon and .... trouble-shooting steps again, even though you've done them ... they need ...Missing: motorola

Roku Remotes Information & Troubleshooting - Roku Support


Jan 01, 2016 | Motorola Mobility ROKR E6 Smartphone

1 Answer

TV will not display picture or sound except for 1 station which appears to be 440. I can't change the channel either at the dials or remote. The display says EAS.


DONT USE the remote that came with your TV

use the buttons on the box to change the channel. did the channel change?

usually when someone only has one channel its because they are changing the tv channel not the cable box channel

think of it like this:
the TV is a monitor and should always be on the same channel (3, 4, hdmi, or whatever) its actually the box that tunes and the tv always stays on the same channel.

so if you change the tv channel you are no longer watching the output of the cable box.

USE the remote supplied by your cable provider

Aug 06, 2013 | Motorola Mobility DCH3416 (160 GB) DTV...

1 Answer

How do you change the channel on a motorola cls1110


Here's a link to the user guide: http://www.banoggle.com/Products/Motorola/manuals/CLS-series-manual.pdf

Programming instructions begin on page 26. The CLS1110 is only capable of doing one channel at a time. You can select from the programming list which frequency you want your one channel to be.

Best regards.

Nov 09, 2010 | Motorola CLS 1110 (1 Channel) 2-Way Radio

1 Answer

Motorola dvr dct6412 locked channels


Check with your provider to ensure that you are in expanded services, or limited. Because being on limited services the box will lock you out of those channels. If you are in billing for those services and you checked the batteries on your remote and they are good and you get a solid red blink when you change channels not a double blink (indicating that your batteries are dying), Then try power cycling your DVR by, removing the power supply and waiting 3sec then plug it back in. Your box should shut off, turn itself back on, then go into the load screen, then, once the load screen display shows on your tv and on box display, wait for your box to completely load (don't touch nothing until the correct time shows up, meaning that it has completed the load process) Once the process is complete turn box back on and you should have you guide back up and (No Data) on your program schedule(Don't Worry!!) it will populate, with 15-20 mins.

Now try to ch. up and down and see if that fixed the problem. also make sure nothing is blocking the sensor. If all else fails and you changed the battery, called your cable provider and request a box swap, (be sure to watch all your recorded shows because they go bye, bye with the cable guy!)

Sep 22, 2009 | Arris DCT6200 DTV Receiver

1 Answer

Have a hp DC7100 minitower pc with 4 dimms slots currently have 2 512's installed and thougth maybe adding an additional 2gig dim basically filling 3 of the dimm slots is this configuration valid





■The system will operate in single channel mode if the DIMM sockets are populated in one channel only.
■The system will operate in dual channel Asymmetric mode if the total memory capacity of the DIMMs in Channel A is not equal to the total memory capacity of the DIMMs in Channel B.
■The system will operate in a higher-performing dual channel Interleaved mode if the total memory capacity of the DIMMs in Channel A is equal to the total memory capacity of the DIMMs in Channel B. However, the technology and device width can vary between the channels, For example, if Channel A is populated with two 256 MB DIMMS and Channel B is populated with one 512 MB DIMM, the system will operate in Interleaved mode.

Oct 15, 2008 | HP Computers & Internet

1 Answer

Extra memory


My manual for P4P800-VM says :-
Mode Dimm A1 DimmA2 DIMM b1 dIMM b2
single ch 1 populated
2 populated
3 populated
4 populated
---------------------------------------- ----------------------------------
Dual ch 1 populated populated
2 populated populated
3 populated popuated populated populated
for dual channel 3 configuration you may
install identical dimms in all four sockets or
identical in A1 and B1 [blue ]
and identical in dimm A2 and dimm B2 [black sockets ].
Probably same as yours
Good luck
64bvt

Jun 18, 2008 | ASUS P4P800-MX Motherboard

1 Answer

AXU4100 Manual or help


Hi,

On a Motorola AXU Series (including the 4100):
1. To unlock, press the “D” button for about a second or until the circle is gone. The circle with the line thru is the keyboard lock indicator;
2. To change channel, you need to press either the arrow left or right in Normal Mode;
3. To change PL (assigned to a channel), don’t think this can be done by the user
4. To change Ch. 1 from 464.500 MHz (PL-67.0) to 463.525 (PL-136.5), don’t think this can also be done by the user.

Even the built-in Programming Mode Parameters do not have this option to change assigned frequencies and PLs. An external programming software using a PC may or may not allow this.

These radios came pre-loaded with its channels assigned with specific frequencies/PLs. As used in a Motorola AXU411, they are:

Channel Frequency PL
1 464.500 67.0
2 464.500 77.0
3 464.500 88.5
4 464.500 179.9
5 464.500 None
6 464.550 67.0
7 464.550 82.5
8 464.550 94.8
9 464.550 179.9
10 464.550 None

Hope this be of help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.

Dec 24, 2007 | Motorola AXU4100 (10 Channels) 2-Way Radio

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74211 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Motorola Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...