Question about Astar LTV-3201 32 in. LCD Television

1 Answer

Astar 32 The color and picture comes out distorted whenever i power on my television. If i were to smack it a bit on the side it would fix for a while but now that does not help either.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Based on your initial post "smack it a bit on the side it would fix" indicates loose connection or more probably a cold solder. Now that it won't come on, then it maybe that the intermittent loose connection/cold solder has deteriorated to the point that there is no longer any connection.

Again basing on the "smack it a bit on the side it would fix", perhaps initial course of action would be to visually check the inside of the TV with particular attention to the connectors and the solder (underneath the PCB) to check for loose or cold solder. Corrective action would require re-seating and or re-soldering.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Astar tv will not come on


If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Aug 29, 2012 | Astar LTV-3201 32 in. LCD Television

3 Answers

No Picture or Sound from ASTAR 32 inch LCD Television


Hi,
There is Part Store having Astar LTV-27BG boards in stock. Please check out might help you to power up back your TV.
Regards,

Aug 28, 2008 | Astar LTV-3201 32 in. LCD Television

1 Answer

ASTAR LTV-3201 will not show picture anymore


Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or
not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.

I repair these power supplies. Write to jah2mil@hotmail.com if you require further assistance.

Dec 27, 2008 | Astar LTV-3201 32 in. LCD Television

1 Answer

Movie


I have that same TV. Go to your controller and press SWAP in the lower cluster of buttons. 4;3 and full work fine its just the panoramic which you have it in is terrible, i have no idea why they included it
Hope that helps and have a nice day.

Nov 28, 2008 | Astar LTV-3201 32 in. LCD Television

5 Answers

ASTAR LCD TV 32'' won't turn on any more.


I have cable connected to my astar tv. I have the same problem whenever I turn my tv off of not getting the tv to come back on. What works for me is 1. Reset power- turning off both the tv

Nov 17, 2008 | Astar LTV-3201 32 in. LCD Television

1 Answer

Yellow stripe in the middle....


Hello,
Your TV having the main board defective. Any question please call me at 323-767-6030.

Sep 26, 2008 | Astar LTV-3201 32 in. LCD Television

2 Answers

No Picture or Sound from ASTAR 32 inch LCD Television


There is more than one problem with. A it could be the main board that finally gave out. B the power board in your TV is not work, and now you can see a picture. Depending on how it's connect the screen could be burn out. but just what type of light comes on when you try to turn it on. if the green light comes on and stay on then it has to do with the picture not the power if you need help narrowing down the problem you can call 226-2211 My E Discounts. I'm a tech and we work with a Astar TV from time to time.

Aug 28, 2008 | Astar LTV-20PW 20 in. EDTV-Ready LCD...

1 Answer

Television picture issues...


I had the same problem when I accidently hit the remote. If you are hooked up to cable make sure INPUT is on the correct setting -- AV, S-Video, YPbPr1, YPbPr2, VGA, HDMI1, HDMI2, ATV & DTV (see button on TV or remote). Hope this solves your problem.

Jul 27, 2008 | Astar LTV-3201 32 in. LCD Television

1 Answer

Do you fix


I can fix your power supply assembly.
Let me know if you are interested. I live in Canada.

Apr 10, 2008 | Astar LTV-3201 32 in. LCD Television

2 Answers

No Picture or Sound from ASTAR 32 inch LCD Television


Google Allelectronics or Hosfelt Electronics for these caps
I just ordered these at a good price but ordered 35Volt instead.
Also replacing 3300uF caps too as they are bulged at top.
Hope this fixes it. Will let you know.

Nov 14, 2007 | Astar LTV-3201 32 in. LCD Television

Not finding what you are looking for?
Astar LTV-3201 32 in. LCD Television Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Astar Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you an Astar Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...