Question about Elna Sewing Machines

1 Answer

I have a elna 5000 . i inserted the wire without adaptor and saw a spart and immediately plug out the cable , now it is not working . Hoa can i fix it . Please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Elna Master
  • 1,122 Answers

Do you mean you've plugged in a 110V machine to 220 V without an adaptor? Or visa versa.

Doens't sound good, being a computerised machine that could have fried the circuit boards and/or engine.

I'd suggest you need to take it to a service technician to establish how damaged it is.

If you go to www.elna.com you may be able to find a local dealer in your country.

Posted on Apr 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hello. My Elna 664 is only 4 months old. Now it's not working. I can hear the motor running but nothing is moving!! I'm freaking out!! Sometimes it will start working again but not now :(


take it to an authorized elna sewing repair shop for warranty repairs
try tightening the knob on the end of the shaft where the big pulley is ( what you turn by hand to line up the needle before sewing)

Oct 07, 2015 | Elna Sewing Machines

1 Answer

How to oil an elna 5000 ?


try this link for a manual, it should have the information in it, if it doesn't the contact elna customer service
Elna 5000 Instruction Manual

Jul 10, 2014 | Elna Sewing Machines

1 Answer

How to insert bobbin


check with youtube for a video on how to insert a bobbin
or try these websites for a manual
this question was put under the elna sewing machine catagory
check with elna customer service about a manual
a elna dealer
sewingpartsonline.com
sew4less.com
sewusa.com
ebay

Apr 16, 2012 | Elna Sewing Machines

1 Answer

Hello, This is Gouthami who has recently purchased a Singer confidence 7470 in ebay which was parceled from USA to Australia. I just got it and while I was plugging it on, I saw a spark by which I...


Did you check if it was a 110V machine before you purchased it??

USA appliances are 110V so good chance by plugging it in in Australia's 240V electricity supply without putting a voltage adapter between you've fried it.

Check the plate on the machine beside the power in point - if it says 110V then you are going to have to buy an adapter (try **** Smith) to use this machine in Australia. However, if you saw sparks then good chance you've fried something already in the machine.

There are a very few quality machines that were made with Dual Voltage such as some of the Elna Stellas and they have a switch in the base of the machine to switch. But certainly not all and you can assume that most appliances coming from USA would be made for 110V power supply only.

Apr 29, 2011 | Sewing Machines

1 Answer

The pipe connecting the footbellows to the Elna TX electronic sewing machine has been damaged where can I find a replacement?


I saw an air electronic foot control for sale today on www.ebay.com.au here in Australia 1/3/2011, $45 I think. Could be the best bet to get a one.

As its an airline, you could try to tape the damage? or if it is at the plug end, cut and shorten the airline and replace the plug end.

Feb 27, 2011 | Elna Sewing Machines

1 Answer

I need a new foot for my old elna, where can I purchase one. Elna SP purchased around 1971 --1972 from White Sewing Center , Cocoa Fla I live in Mount Holly N.C. 28120


you can buy Elna parts from www.whitesewingcenter.com, he specialises in the Swiss Elnas and carries range of stock. Or www.sewingpartsonline.com or www.sewusa.com stock Elna parts for both early Swiss as well as the latet ones. not sure if you meant a pressure foot or the foot control. If its pressure feet the generic low shank feet may well fit your mschine too once you buy the pressure foot adaptor for the newer clip on feet. There was a Lotus Sp and a star SP but the pressure feet were the same with the built in shank you attached with a thumb screw. the air electronics had the adaptor and clip on feet but they have same height and needle position so can use on earlier ones too.

Oct 01, 2010 | Elna 2007 Mechanical Sewing Machine

4 Answers

Free manual for Elna 7000 sewing machine I have a sewing machine I received from my mother who is 90 it is an Elna 7000 There is no manual on how to use the machine I need to find a manual to know how to...


hello, I don't know if you have found a manual yet, but I have the elna 7000 and it's manual.I could copy mages and send as an attachment as a last resort for you. I am giving the machine and all its many books to my daughter in law,

Jul 17, 2010 | Elna 8007

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...