Question about Onkyo HTR500 Receiver

1 Answer

Onkyo ht-r500 Hi I have an Onkyo ht-r500 that when I press power it comes on then goes back off after about a second, I have some knowledge of electronics and took the cover off to check for something simple like a blown fuse or broken wire, but didnt find anything, any suggestions? where should I get a schematic, is there anywhere I can get one for free ?? Thank you

Posted by on

  • Stephen REESE Ferguson
    Stephen REESE Ferguson Dec 03, 2008

    I have the same problem. The system was working fine, I turned the volume up and the system went into standby. I pushed the power button back on and the system came on after a brief second, went right back into standby. I also thought of an inline fuse blown and tried to find one to no avail.... Is there an answer out there yet?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

I found the manual sometime back...try 3Xdouble-u dot eserviceinfo dot com

Posted on Oct 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to setup


http://www.manualslib.com/manual/302221/Onkyo-Ht-R500.html

Jan 10, 2015 | Onkyo Ht-r500 5.1 Channels Receiver A/v...

1 Answer

Onkyo AV Receiver HT-R500 No power whatsoever, no illumination of any display options and no activation clicks upon pressing the power button! We inspected the receiver via dust cover removal and found no...


If that is true the power transformer is probably open at the primary, the secondary voltages feed the receiver and power various parts. I suggest getting it checked, my worry is the power transformer may not be available from the parts manufacture.

Mar 28, 2012 | Onkyo Audio Players & Recorders

1 Answer

I have an Onkyo AV Receiver HT-R500 and when I turn it on, it turns on and in less than one second it turns back to standby. What could be wrong?.


Try disconnecting all the speakers and see if it does the same thing. If it doesn't, connect speakers again one at a time to find out which one of them is doing it. Make sure the speakers rating match the output of the amp.

Jun 16, 2011 | Onkyo HTR500 Receiver

1 Answer

Onkyo ht-r500 no speakers attached goes directly into protect mode, standby light blinking..


I have a HT-R520 - First thing stated in the manual is 'Do Not Apply Power to the System Until All the Speakers Are Connected to the Receiver.' This practice avoids any hot connects to the speakers. As with any high-outpiut system connecting spreaker wires to the system while in operation can spike the speakers as well as the amplifier curcuits. Hook up your speakers first and give it a try. Good Luck!

Jul 14, 2009 | Onkyo HTR500 Receiver

1 Answer

Power on but no tuning or sound from other sources


Check for "Tape Monitor On" button. According to Onkyo's web page "Press and hold the tape button for two seconds allows the tape and MD sources to be switched - Also try the speaker A/B switch. - Check back for further assistance - The web page for your operations manual can be found at...
http://www.us.onkyo.com/download/own_manuals.cfm?cat=Receiver
Then select your model.
Hope this helps
Len

Mar 02, 2009 | Onkyo HTR500 Receiver

1 Answer

Connecting Sirus audio to Onkyo HT-R500


Carl- If you are sending a Line Level Audio signal to your ONKYO RECEVER, from your Sirus RCA cable Output, IE, the CD input, the VCR input, the AUX in, ETC. No Need to have the RECEIVER in the FM mode, you are just needing amplificaton of the sound signal or Sirus signal sound.

Feb 28, 2009 | Onkyo HTR500 Receiver

1 Answer

Onkyo HT-SR800 won't turn on


If you call Onkyo directly, 201-785-2600, there is a procedure to "reset" the system, something like holding the power button on and holding down another button for a few seconds. Can't remember which, so I can't be sure, but try giving them a call.

Jan 02, 2009 | Onkyo HT-SR800 System

1 Answer

Losing memory settings


On remote control before you shut off yor receiver press "TEST" button to save the memory. It will save every setting. Make sure to do that all the time after you change the setings.

Nov 23, 2008 | Onkyo HTR500 Receiver

1 Answer

Onkyo HT-R500


Unit has circuitry problems, take in for service

Mar 14, 2008 | Onkyo HTR500 Receiver

1 Answer

Wireing


Consult HT-R500 operations manual for hook up

Feb 08, 2008 | Onkyo HTR500 Receiver

Not finding what you are looking for?
Onkyo HTR500 Receiver Logo

Related Topics:

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...