Question about Heating & Cooling

Open Question

Brivis wombat 2P 20 will not ignite. The pilot has gone out and will not come back on. Have tried to turn off and on a control panel. Gas supply and power supply is good... what else should I look at?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

reyjoshua07
  • 1157 Answers

SOURCE: brivis buffalo 85 EMS .

Hi redrosebulld,

If the EPRL light still flashes most likely the thermocouple has worn out. The thermocouple is a safety device which stops the gas from flowing. I will recommend to consult an authorized repairman to check the thermocouple and also the injector.

Hope it helps.

Thank you for using FixYa.

Posted on May 20, 2011

  • 2 Answers

SOURCE: Air blowing out - Pilot on but no heat.

Possibly overheating or previously overheated, these units are also prone to control box issues usually a buzzing noise at the unit it present if this is the case.

Posted on Apr 28, 2010

  • 81 Answers

SOURCE: Brivis gas heater - Wombat

Take fan apart - easy. Clean with WD40 and then oil with 3and1
Works on all fans.

Posted on Jul 19, 2011

  • 2461 Answers

SOURCE: pilot light is large and

blocked pilot , lack of air so it burns yellow needs blowing out with air line or can of air , or undo and clean pilot .

Posted on Jul 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can we turn the heat off 2-3 rooms with this brivis wombat 92 gas heating system - heating just the parts of the house we choose.


You could freeze water pipes if bathrooms are connected to those rooms - on a cold winter day (depending where you are). All gas appliances should have a shutoff valve. Shutting that off may screw up the main controller - it won't get the proper signal that the flame started ok.

Aug 24, 2014 | Heating & Cooling

1 Answer

Brivis multiplex he20e


MPS HE20E is a gas heater. So the unit should need a pilot to be re-ignited. This will happen automatically once you press the ON button on the controller. Assuming the gas supply is normal this should happen immediately. The unit attempts re-ignition 4 to 5 times but if the pilot does not turn on it will display an error code on the controller. Take extreme precautions when dealing with gas appliances. Make sure you call a technician if unsure.

Aug 21, 2014 | Heating & Cooling

1 Answer

Brivis wombat 2P 20


love to know how you went , i have a similar problem with the same unit.....

May 29, 2013 | Heating & Cooling

1 Answer

Brivis buffalo 20 problems


Potentially bad pilot valve. clean pilot. then report back.

Jun 12, 2012 | Heating & Cooling

1 Answer

Pilot light is large and yellow on the brivis 92 wombat


blocked pilot , lack of air so it burns yellow needs blowing out with air line or can of air , or undo and clean pilot .

Jul 25, 2011 | Heating & Cooling

1 Answer

Brivis gas heater - Wombat 20 - fan doesnt seem to be operating at full speed


Take fan apart - easy. Clean with WD40 and then oil with 3and1
Works on all fans.

Jul 15, 2011 | Heating & Cooling

1 Answer

My brivis wombat 120 igniter won't work so I can't light the pilot


I have a brivis wombat 120. When room temperature is lower than required temperature, it starts to fire up and sends heating air. Now, it does start firing. If I increase the temperature testing, you can hear ant click sound from heater, but no firing. Can anyone help

Mar 26, 2011 | Heating & Cooling

1 Answer

Air blowing out - Pilot on but no heat.


Possibly overheating or previously overheated, these units are also prone to control box issues usually a buzzing noise at the unit it present if this is the case.

Apr 28, 2010 | Heating & Cooling

4 Answers

Brivis central heating fan will not switch off runs continuous


brivis wombat 2P 20 ducted heater, gas fires up but fan not starting
Any suggestions...???

May 12, 2009 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2460 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...