Question about Zhone (6218-I2-200) Router

2 Answers

Zhone linksys router

I have zhone 6211 DSL modem and I'm trying to use linksys wrt54gs wireless router. When I connect the router to the modem there is no internet connection. However when i connect my computer directly to the modem i have an internet connection

Posted by on

  • Anonymous Mar 12, 2014

    How do I connect a Zhone 6381-A4-200 to Belkin N600 to connect to the internet

×

2 Answers

I had same problem but I think it's more of a simple solution. Linksys default IP it uses is 192.168.1.1, and guess what...so is the zhone router. I changed my linksys router to 192.168.10.1 and i am able to connect to the internet. Only problem I have left is some things are not working such as MSN messenger and https pages. I am wondering why...

Posted on Aug 27, 2008

  • CSSONSITE Nov 29, 2010

    I recently saw this issue on a Yadtel "Fiber in home" network connection. The Zhone modem was configured in "pass thru" mode. I tried 4 different Linksys routers. Only a very old one worked. The 3 others would not establish a pppoe connection. I tried a Netgear and it worked on the first go. All routers were configured to 192.168.2.1. I flashed the Linksys router firmware to their latest release.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

i have read the same problem on the supportrix forum and you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router and repeat the same steps.
note:
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username (email address format) and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

Posted on Aug 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I CONNECT DSL LINE TO LINKSYS WRT54GS


The WRT54GS does not have a jack to connect a phone/DSL line to, so in order to use this router with a DSL connection, you'd have to connect the DSL line to a modem and then connect the modem to the router, or connect the DSL line to a computer if you have an internal modem, and then connect that computer to the router.

Dec 15, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I have a zhone 6211-I3-200-ADSL2+CPE w/phone filter. I am trying to connect 2 computers (1 laptop, 1 desk top) to a linksys WRT 150n wireless router and cannot get the wireless connection to work. It shows...


1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Aug 03, 2010 | Zhone 6211-I3-200 Router

1 Answer

Switched from DSL modem to Cable modem. Linksys


If you had your linksys router controlling the DSL connection, it was most likely a PPPoe connection requiring a username and password. Most cable companies have dynamic IP address and do not require a username or password.

Open your internet browser, IE, Firefox etc and go to 192.168.1.1 >
Enter your router username and password, typically admin and admin

In the setup tab, change your connection FROM whatever is listed there and make sure it is Autumatic DHCP Save your settings, and restart the router.

You should be fine.

Oct 27, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

The linksys wrt54gs-uk


With a DSL modem in the US, you need to confiugre the router for PPPOE with the username/password that was provided to you by your ISP. If you can't remember the name or password, contact your ISP

May 31, 2009 | Linksys Wireless-G Broadband Router

1 Answer

DSL line disconnects on WRT54GS only


Try to change the LAN IP address of your router to 192.168.2.1 by accessing the router's Setup page. You also need to set your Westell modem to "full-bridge mode". You need to ask assistance from your ISP to bridge the modem. After that, set-up the Linksys router to PPPoE then power cycle it.

Apr 15, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Internet connection problem Zhone 6211


After a while the net stops working then when i open the router page for the settings it starts back working

Aug 08, 2008 | Paradyne 6211 ADSL2+ Router (6211I1200)

1 Answer

Linksys Wireless-G (WRT54GS (EU/LA/UK))


I have had that issue quite often and found that when you are using a router with DSL, the DSL modem and Router IP has a conflict because they are the same number. I suggest looking into a D-Link wireless router for use with DSL.

Mar 17, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Linksys Wireless-G WRT54GS


You just needed to Connect ur router to the computer
1>open Internet explorer type 192.168.1.1 and then Enter
2>Leave the username blank and password admin(lowercase)
3>then in linksys page change the Local IP of the router to 192.168.2.1 and then power cycle the network it will not create any problem later

Mar 08, 2008 | Linksys Wireless-G WRT54GS Router...

2 Answers

Wireless router connectivity WRT54GS


The first thing we need to insure is that you are connecting to this router via cable and not wirelessly, though it is possible to configure the router via a wireless connection it is very much not recommended for various reasons.
If you ARE connecting via wire, please be specific as to what happens after you enter 192.128.1.1 in the HTTP line of your browser.

Jan 07, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Linksys wireless connection keeps getting dropped


From you DSL modem or broadband router, what is the next device connected?

Nov 27, 2007 | Linksys Wireless-G WRT54GS Router...

Not finding what you are looking for?
Zhone (6218-I2-200) Router Logo

1,839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zhone Routers Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Ed Mac

Level 3 Expert

709 Answers

Are you a Zhone Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...