Question about Yukon 28041 Binocular

1 Answer

The Main IR Light. (the one used for long distance) has stopped working. I'm sure the led light is not working. Any suggestion on where I could get a replacement LED or who could fix it in the Nashville Tn. Area. Thank you. Hutch

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 577 Answers

Here we go. Take it to electronic repair facilities. See if the can replace the LED IR. Now if they want. Call Yukon NV Optics and see what the charge, normally these companies have flate fee they will charge. They really don't make it easy for the owner to repair these NV binocular. Basically, the binocular will almost be totally taken a part. stewbison

Posted on Aug 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I reset my remote for my Yamaha natural sound AV receiver RX V 371 the remote just stopped working one day it has fresh batteries still no response between receiver and remotethough the light is...


By your description of "light is flashing on the remote" I will assume the "function" LED on the actual remote, as the infrared (IR) LED light spectrum used to communicate with the receiver is invisible to the human eye. Let's try "simple" first. Is there something blocking the IR pickup device on the front of the RX-V371 receiver? It may be difficult to locate the pickup window and-so make sure the entire front of receiver is unobstructed. Also, IR remotes are a "line-of-sight" type device and must have an unobstructed view of the device being controlled.

Mar 29, 2015 | Yamaha Audio Players & Recorders

Tip

How to see if your remote control is actually working


For remotes which use an IR connection you can see if they are transmitting using this trick. An IR type of remote will have one or two LED's on the front end. If it doesn't, than it may be an RF type of remote - this tip will not work for those.

Get some electronic device which can view a live image on a screen. A cell phone camera, digital camera, digital video camera, and (I think) even a web-cam will work. If you're using a digital (still) camera, you don't need to take a picture as long as you see a live image on the screen of whatever the camera is pointing at. Take your remote and find the LED on the front end. There may be one or two. (If there's two, one actually isn't an LED, but that's not too important.) Point the front of the remote at the camera (LED's facing the camera), and press buttons. You should see the LED's light up in the live image. While these LED's normally produce light which the human eye can't see, digital image sensors can, and they change this invisible light to light we can see on the screen. (Cool right?) So, if your remote is working then you'll see the LED light up on the display. (To make sure your camera is actually working as I am suggesting here, find a remote which you know does work and try it.)

The LED should light up for every button pressed. If one button doesn't make the LED glow, you may have a bad button - try pressing it firmly. Buttons can wear out. The image of the LED may appear steady or it may pulse or blink on the viewscreen - this is normal.

If the LED doesn't light up, and you know your camera works like this (you've checked a good remote), try new batteries - that solves most problems. Check the battery contacts in the remote - if they're corroded, (white flaky stuff caked on, looks like dried up salt) - you can clean the contacts with a solution of water and baking soda and a Q-Tip. Use a knife to remove any large chunks. Also, some fine sand paper works too. Both the flat contacts and the springs need to be cleaned. Wash any tools (and hands) with soap and water afterwards. Handle corroded batteries as little as possible - or better yet, use gloves.

If you have good batteries and the contacts are clean, and the LED is not lighting up - it's pooched. Try getting a replacement from the manufacturer (call or email/write them), or use a universal remote.

If you've found this tip helpful, please check the box below. =8o)

#Remote #RemoteControl #IRRemote

on Jul 08, 2014 | Televison & Video

1 Answer

My Maestro IR remote no longer works after 10 years


The infrared (IR) LED / remote may have stopped working. Since it emits IR light when used, you won't be able to actually see the light with the ***** eye. This makes it difficult, but not impossible to determine if the LED / remote is working or not. You can see if it works by pointing it a night time security camera - the type that has it's own built in IR LEDs to light up the area and does not need visible light to shine on the area (some video cameras can also "see" this light when playing back video taken of an active IR light source). Either record or have someone watch the display while pressing a button on the remote and aiming at the camera. You should be able to do this in broad daylight it will look like a flashlight shining into the camera.

If the LED in the remote is proved to be functioning, the IR receiver in the switch, or some other internal part of the switch may have failed. Since the receiver doesn't light up - there's no way to determine if this is the case without actually replacing the switch. It doesn't matter really, as there are no user replaceable parts in the switch - it either works, or it doesn't.

Ultimately, the best way to troubleshoot will be by replacing components with known good types. Use a battery that tests "good" on a tester, in a new or known to be good remote, used on a new or known to be good switch. You'd would deal with the situation by swapping only ONE component at a time. Once you change the device that allows to circuit to work, replace the new components with the old - except to last one; as this was likely the component that caused the failure.

Try taking the remote to a Home Depot, Lowe's or other similar store with a display of these switches. Do what you need to do to your remote to see if you can control any of the switches/ lights.

Good luck!

Apr 13, 2012 | Electrical Supplies

1 Answer

I need a I/R setup for these binos...do you have pr can you tell me where i can get one...thanks


Hello, contact Night Vision Optics they should be able to get you one. You can make your own by using an head light. Get an IR bulb, or change the lens to IR lens. If you want to high tech then get head light will IR LED's. If the white LED's are used don't use IR lens over this white LED's because of the light spectrum is different for the the LED's than incandescent light. They will have to be changed IR LED's..GB...stewbison

Jan 09, 2011 | Kalinka Baigish 12 Russian Night Vision...

1 Answer

My remote stopped working with my television. all I need is a manual that I cannot find. for CL007 remote


Remotes are pretty simple things to fix. a few problems, tests and fixes.
1) test remote closer to device - if it works then replace batteries.
2) If some buttons fail to work that used to work - disassemble and clean muck off board and rubber contact pad.
3) remote will not work at all at any distance - use camera on phone to see IR led operation when pushing buttons on remote - could be batteries, IR led failure or ceramic resonator failure - you need test equipment to faultfind.

The only parts that tend to fail on a remote are batteries, IR LED, Ceramic resonator, and dirty/wet board/rubber contact pads

Mar 19, 2010 | Zenith ZN620 Remote Control

2 Answers

Remote Control does not work


well probally not dust sounds like a bad reciver i just fixed one about a month ago

Apr 03, 2009 | Sylvania SRC22134 13 in. TV/VCR Combo

1 Answer

My 880 only works from about 3 feet away but used to work fine from across the room. The battery is new and charged and I have updated the firmware and the settings. It works fine up close but not at...


you need to return it. one of the IR led only works. I had that, had to return (RMA) the unit. you can check with some camcorders to see how bright the LED is (the camcorders often can 'see' the IR led like a white light).
i.e. either the power circuit for the IR LEDs is failing or the IR LED themselves are dead.
there is nothign you can fix on your own. CAll the support and get a replacement unit. or return the remote to a store if you just bought it.

Feb 24, 2009 | Logitech Harmony 880 LCD Remote Control

1 Answer

Film speed override?


Press and hold the ISO button on the top left and rotate the command dial on the right until the film speed appears on the display. Release the ISO button and the speed is set.

In case your instructor hasn't told you, IR light is just below visible light on the spectrum and has a longer wavelength. Therefore, IR light will focus behind the film plane for a given setting. I.e., if you preset the lens to focus at 10 feet, the IR light will focus at a shorter distance. Unless your lens has a distance mark for IR, I would limit my shooting to longer distances and smaller f-stops to use the depth-of -field to compensate. When you are in focus for IR, the image in your viewfinder will be out of focus. The closer you are to the subject, the more out of focus the image will appear at the correct focus setting.

Sep 07, 2008 | Nikon N6006 35mm SLR Camera

2 Answers

URC-9910 remote: The RF part for this remote stopped working.


I have the same remote as yours and occasionally the RF remote is not working due the interference signal from outside or next door at certain hours.
My suggestions:
(1) To relocate the receiver and reposition the anntena for better reception of the RF signal from the remote unit.
(2) Replaced the battery.

Hope these help!

Aug 04, 2008 | One For All URC-9910 LCD Remote Control

1 Answer

Remote Control stopped working


Try these simple trick to find out yor remote control working or not....
Point the remote control towards the Camera of a Mobile Camera phone,with the camera on. While pressing remote, we can see a light (Infra Red) coming from its IR LED through the Mobile Camera if the Remote is working.
Otherwise the problem will be with the remote sensor or related components of the device.

Aug 27, 2006 | Toshiba SD-H400

Not finding what you are looking for?
Yukon 28041 Binocular Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yukon Optics Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

John Porter

Level 2 Expert

85 Answers

james laughton
james laughton

Level 3 Expert

2114 Answers

Are you a Yukon Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...