Question about DISH Network IR Remote Control

1 Answer

I want to program my Magnavox TB110MW9DTV Digital analog converter box to the aux button on my Dish network 4.0 IR/UHF PRO remote. I can't find a code to program this. I have talked with Dish and I have talked with Magnavox. Neither know the code to use. Magnavox suggested www.remotecodelist.com, with has led me to you. Can you tell me a code or is there not one. Thanks.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • DISH Network Expert
  • 146 Answers

Hey there, Cheri Torres with DISH Network Customer Service here. We unfortunately do not have any codes for our DISH network remote controls that will program a Magnavox digital converter box. An option you can try is a power scan which will basically find the code for you in some cases. I will list here for you the instructions for addressing your DISH remote to your converter box. I hope you find these instructions helpful and if you have any other questions feel free to post back here and I would be happy to help.

Instructions for performing a power scan

  1. With the desired equipment on, press and hold the AUX Mode button until all mode button back lights illuminate, then release.
  2. Press and release the # 2 then the STAR (*) button.
  3. Press and release the Power button.
  4. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  5. Press the POUND (#) button as soon as the desired equipment powers off. Note: If the code entered is valid for the remote, the mode light flashes three times.

Posted on Apr 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to program a zenith tv to work with the 21.0 ir/uhf pro remote control


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Look up codes for TV here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Feb 14, 2014 | DISH Network ES161256 21.0 IR / UHF Pro...

1 Answer

How to program the UHF remote 153638 to link with the 106240. UHF/IR


you have to go to menu and look for the IR/UHF settings for the remote control and have it change to UHF, so that it would work for both remote!

Jan 24, 2014 | DISH Network IR Remote Control

1 Answer

Auto program dish remote 21.0 IR/UHF Pro to Epic Sound Receiver


DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Jan 22, 2013 | DISH Network IR Remote Control

1 Answer

Sanyo TV Code for Dish remote 21.0 IR/UHF PRO only operates TV Power and Volume Functions.


Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Jan 16, 2013 | DISH Network ES161256 21.0 IR / UHF Pro...

1 Answer

How to program remote to dish? 4.4 IR/UHF PRO


Your question is not clear as to whether you want to program the remote to your TV or the DISH receiver. Here are steps for both if this has not been resolved already!


DISH RECEIVER::
1. Go to the room where the receiver is located. With the remote for THAT room press menu twice. (This will be the remote with the Green 1 on the bottom.)
2. Press and release the SAT button on the top left of the remote
3. Press and release the black and red record button 3 times
4. Look that the number next to remote address (secondary Remote address) has changed.
5. If not, start again.


TV::
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.

Becki Barned
DISH Network Customer Service
becki.barned@dishnetwork.com




Aug 13, 2011 | Universal Remote Control DISH Network...

1 Answer

HOW CAN i RESET SAT CODE FOR DIH REMOTE CONTROL FOR DIFFERENT DISH BOX


nmg55

Not all remote are compatible with all our receivers. Depending on the receiver and remote model numbers, if they are compatible you can readdress the remote to the receiver. I have provided a link for readdressing the remote to the receiver. I hope this helps.

Instructions on how to readdress the remote to the receiver:
http://www.dishnetwork.com/SupportSection/remote-setup
Remotes and receivers models:





222 -
21.0 IR / UHF Pro


222k - 21.0 IR / UHF Pro


301 -
3.4 IR


311 -
3.4 IR


322 -
4.4 IR / UHF Pro


381 -
6.4 IR / UHF Pro


411 -
20.0 IR


501 -
6.4 IR / UHF Pro


508 -
6.4 IR / UHF Pro


510 -
6.4 IR / UHF Pro


512 -
6.4 IR / UHF Pro


522 -
6.4 IR / UHF Pro


612 -
21.0 IR / UHF Pro


622 -
21.0 IR / UHF Pro


625 -
6.4 IR / UHF Pro


722 -
21.0 IR / UHF Pro


722k - 21.0 IR / UHF Pro







Ray Calo
DISH Network

































Nov 06, 2010 | DISH Network IR Remote Control

1 Answer

Replaced a Dish VIP722 with the new VIP722k,--got new remotes, also have a Bellvu 3100 on same primary TV. Used to be able to use one remote to control either recever boxes. How to I add the 3100 to the...


d1032d_junk3

If you are using the remote to operate an IR frequency, you can program that component to the VCR or AUX button on the new remote. I have provided the instructions on how to program the remote. I hope this helps.


Address To 2nd IR Receiver Using AUX Mode
  • Remote: 3.4, 4.4, 5.3, 5.4, 6.3, 6.4, 20.0, and 21.0
    1. Go to 2nd IR receiver
    2. Go to System Info Screen
    3. Hold down the AUX button until all mode lights light up.
    4. Press 3 then enter a number between 1 and 15 using the numeric keypad on the remote.
    5. Press the pound (#) button
    6. Once the AUX button blinks three times, press record. Note: If successful the number selected in step 4 will appear in the System Info screen under Remote Address.

Ray Calo
DISH Network

Jun 13, 2010 | DISH Network IR Remote Control

2 Answers

Dish Network not working all... lights up but nothing else!


call dish network. they have all the information you could possably need.

their phone number is inside your recivers manual

Aug 19, 2009 | Universal Remote Control Dish Network...

1 Answer

Dish Network 5.0 IR Remote Sony DAV-HDX275


The code for the 6.3 ir/uhf pro remote when set to uhf is 794. Fist hold down aux until all lights blink then press 2 then enter 794 and press #.

Jan 25, 2009 | Durabrand HT-3915 System

Not finding what you are looking for?
DISH Network IR Remote Control Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...