Question about IBM ThinkPad 600E 2645 Notebook

2 Answers

Start up when the machine is turned on the screen shows error 161-163-173? could you help me please?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

start up - moz-screenshot-2.jpgThe back up battery inside your laptop is dead here is how to replace it
0161 Dead Battery
0173 Configuration Data was Lost

  1. Loosen screw 1.
  2. Lift DIMM door off.
  3. Gently pry battery connector loose with a screw driver.
  4. Remove battery.



pull it out and head to a Radio shack and purchase a replacement battery after that you should be all set, let me know if you have any further questions I am happy to help

Posted on Aug 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,028 Answers

These error codes indicates that the cmos battery is dead and needs replaced. The cmos is a large watch type battery, about the size of a nickle, that will be in a slot on the motherboard or in a yellow pouch with two wires that lead to a connector. If in the pouch it will be located either under the battery or the keyboard. Replace the cmos and the problem should be fixed.

Posted on Aug 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

E5 show on my screen cannot sew keep on peeping


singer sewing machine error code e5 Questions & Answers ...

www.fixya.com > Forum > Tags
Find solutions to your singer sewing machine error code e5 question. Get free help, tips & support from top experts on ... Singer 3116 Simple. 887 Questions ...

Sep 20, 2015 | Singer 3116 Simple

1 Answer

How do I fix an x-pm brother 4000d error


Call the Brother toll free service line

Dec 14, 2014 | Brother Sewing Machines

1 Answer

Error code 15 on a jura giga professional x7 coffee machine


Dear sir ,

Please help me, Now my coffee machine Jura GiGa X7 Professional , When i start turn on machine maybe 15 second it turn off by it self.

Jan 11, 2014 | Coffee Makers & Espresso Machines

1 Answer

My machine is canon NP3050 type F127500 and the problem is that, when you start up the machine, the screan show error code E002 please what can i do?


E002 is a clasic Fuser error
"E002Fuser temperature too low"
Turn OFF and ON the machine, if that dosent help you need to replace the Fuser Unit.

May 25, 2012 | Canon Office Equipment & Supplies

5 Answers

My kyocera taskalfa 180 showing c6400 error please help.


C6400 is a fixing unit error.

To reset -

Try this, enter "10871087" from keypad, You should now be in maintenance mode.
Enter "163"press "Start / Print" key.

You should see a screen that says "Execute".

Cursor / highlight "Execute".

Press "Start / Print key.

The machine will turn off and should come back to ready. If not then you need to replace the fixing unit.

I hope this is helpful,
Shawn


Feb 25, 2011 | Kyocera TASKalfa 180 Copier

2 Answers

KEOCERA MITA photocopier KM4035 have problem. My Machine is showing error code C6000. How to tackle this proble. Please help me as soon as possible.


KM/CS 2530, 3530, 4030, 3035, 4035, 5035

C6400 is a fixing unit error.

To reset -

Try this, enter "10871087" from keypad, You should now be in maintenance mode.
Enter "163"press "Start / Print" key.

You should see a screen that says "Execute".

Press EXCUTE on the touch panel. It is displayed in reverse.

Press "Start / Print key.

The machine will turn off and then back on then come back to ready. If not then you need to replace the fixing unit.

I hope this is helpful,

Feb 02, 2011 | Kyocera Mita KM-4035 Printer

2 Answers

Blue screen error again


when you start the machine it will show you press del to enter setup or F 2 press those butons wich the machine tells you then only you will see the bios look for the things you mentioned and change them

Sep 25, 2009 | Computers & Internet

1 Answer

Xerox 8560 error: 09,006,41:3573


You have to go into Diagnostics and reset the ISC (Ink Stick Count) faults.This is under the functions section of the diagnostic screen.

Hold down the "back" and "information" buttons while turning on the machine to get into the diagnostic mode. Wait till you see the diagnostic mode message in the screen before releasing the buttons. It may take as long as 7 or 8 minutes after you release the buttons for the diagnostic menu to come up.

Jul 17, 2009 | Xerox Phaser 8560N Laser Printer

1 Answer

Error 000001-0004 ON MY IMAGE RUNNER 2620N,000001-0003 on3200n


ok that code has nothing to do with your drums that code is for a error in the fuser unit, you have to reset it in this order ADD FUNC key// then hold down the 2 & 8 keys at the same time / then ADD FUNC key again... screen should change to serv mode.... then in this order.touch copier/func/clear/err. ok turn off copier then back on... if code comes back you have a bad fuser unit swap it out clear the code again then try the new unit

Dec 22, 2008 | Canon Office Equipment & Supplies

1 Answer

Error when turning on machine.


I have a feeling that this has something to do with software on the hard drive. Either the software needs to be restored on it or it could have crashed. A Konica/Minolta dealer in your area should be contacted to send a technician out to look at the situation.

Aug 08, 2008 | Minolta bizhub 200 Copier

Not finding what you are looking for?

Open Questions:

0 Answers

ibm thinkpad does not boot My IBM Thinkpad 600 (Type 2645-310) stops and hang during bootup. What happens is: 1. LED test, then green Power on and orange battery/charging 3. RAM OK (Responds when I take out /put in different amount of RAM and displays correctly. I have 128 + 32 removable, + 32 internal not possible to take out) 2. I can hear fan, CD drive and evt diskette drive. If I use diskette drive the LED wil give 1 blink, if I use CD drive it will give 14 blink. 3. No cursor seen, but this is displayed: Upper left show the amount of RAM present: 196032 KB OK Upper right IBMs logo in blue; IBM Lower left shows "ThinkPad(R)" in large letters and red dot over "i". 4. Then a "rrrrrr" sound from the loudspeakers after a while, this is in fact 28 clicks shortly after each other. Then nothing more happens. Diskette and CD drive is OK (But can not be used because bootup is never finished). I hear CD speed up and then down again but nothing more happens. No effect in booting with bootable diskette or CD, "Live Linux" CD or else. Backup battery OK (3V) and if I take it out I will be asked for correct date and time when Power on. I can then use keyboard or TrackPoint to set date and time, and after that hangup at the usual point. Starting without battery, HDD, CD drive and removable memory sticks makes no difference in symptoms. Pressing and holding F1 before and during poweron and startup (in order to enter BIOS and selftest) has no effect. I could not find help on IBMs home page, but maybe I did not look at the right place. Is somebody able to help me?

Feb 28, 2017 | IBM ThinkPad 600E 2645 Notebook

See all IBM ThinkPad 600E 2645 Notebook Questions

IBM ThinkPad 600E 2645 Notebook Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...