Question about Frigidaire FGQ1442ES Gas Dryer

1 Answer

I need an oraface for a frigidaire dryer modle#glgr341as4 its running on L.P. and I am at 7000 feet elevation

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,998 Answers

You can order any part by going to www.marcone.com under contact us there is a 1800 number or to keep things competitive you can also try www.allbrandsappliance.com as well if you have any further questions message me back and please remember to rank how this opinion has helped when our chat has fully concluded thanks Rick

Posted on Apr 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I Have a Frigidaire gas dryer that just beeps but dose not start Modle number FFLG1011MW


It is most likely the dryer's control panel or if that is ok the thermal limiter fuse has failed, is the dryer exhaust duct work clean of lint?

Mar 02, 2017 | Frigidaire Dryers

2 Answers

Ktm 200sx not running right


Is your power valve clean, and moves freely? And don't forget to make sure the air filter is squeaky clean. How does the plug color look?

Aug 09, 2009 | 2003 KTM SX 250

1 Answer

How many cubic feet is the Kenmoore model#110


MODLE 110 IS YEST A CODE FOR KENMORE TO LET THEM NOW IT WAS MADE BY WHIRLPOOL AND MOST OF THEM THEY ARE 2.5QF

Jan 24, 2009 | Kenmore 63942 Dryer

1 Answer

Jetting


WHAT MEAN JET? : Carb jetting can be easily understood if we understand the basic principles of carb and engine operation. A carb mixes fuel with air before it goes into the engine. When the mixture is correct the engine runs well. The bottom line is a carb must be adjusted to deliver fuel and air to the engine at a precise ratio. This precise ratio can be affected by a number of outside and inside influences. If you are aware of these influences you can re-jet your carb to compensate for the changes. I'm going to show you some examples of how you can change your jetting for better performance and in some cases increased engine life. As with any engine work be sure you have good tools the correct parts and a good manual before you get your hands dirty! ALTITUDE COMPENSATION: For our first example let's say we find a new riding area WAAY up in the mountains. Our jetting is dialled in for our usual riding area which ranges from sea level to 1500 feet. Our NEW riding area starts at 4000 feet and goes up from there. Going to a higher elevation will require will require a jetting change but which way? Like our fuel density air density can also change. Higher elevations have less air density then lower ones. At high elevations our engines are getting less air so they need less fuel to maintain the proper air/fuel ratio. Generally you would go down 1 main jet size for every 1750 to 2000 feet of elevation you go up (info for Mikuni carbs). If you normally run a 260 main jet at sea level you would drop down to a 240 at 4000 feet. Something else goes down as you go up in elevation is horsepower. You can figure on losing about 3% or your power for every 1000 feet you go up. At 4000 feet your power will be down about 12%-even though you rejetted! For our second example let's say we are still at our new 4000-feet elevation riding area and a storm comes in. We head back to camp and ride it out overnight. The next day there's a foot of snow on the ground the skies are clear and it's COLD!. Aside from getting the campfire going and making some coffee you should be thinking about jetting again! Cold air is dense air and dense air requires bigger jets. If the 240 jet ran good the day before you will need a bigger jet to run properly today. If the temperature is 50 degrees colder,,

Nov 10, 2008 | 2005 Hartford VR 200X

1 Answer

Jetting


WHAT MEAN JET? : Carb jetting can be easily understood if we understand the basic principles of carb and engine operation. A carb mixes fuel with air before it goes into the engine. When the mixture is correct the engine runs well. The bottom line is a carb must be adjusted to deliver fuel and air to the engine at a precise ratio. This precise ratio can be affected by a number of outside and inside influences. If you are aware of these influences you can re-jet your carb to compensate for the changes. I'm going to show you some examples of how you can change your jetting for better performance and in some cases increased engine life. As with any engine work be sure you have good tools the correct parts and a good manual before you get your hands dirty! ALTITUDE COMPENSATION: For our first example let's say we find a new riding area WAAY up in the mountains. Our jetting is dialled in for our usual riding area which ranges from sea level to 1500 feet. Our NEW riding area starts at 4000 feet and goes up from there. Going to a higher elevation will require will require a jetting change but which way? Like our fuel density air density can also change. Higher elevations have less air density then lower ones. At high elevations our engines are getting less air so they need less fuel to maintain the proper air/fuel ratio. Generally you would go down 1 main jet size for every 1750 to 2000 feet of elevation you go up (info for Mikuni carbs). If you normally run a 260 main jet at sea level you would drop down to a 240 at 4000 feet. Something else goes down as you go up in elevation is horsepower. You can figure on losing about 3% or your power for every 1000 feet you go up. At 4000 feet your power will be down about 12%-even though you rejetted! For our second example let's say we are still at our new 4000-feet elevation riding area and a storm comes in. We head back to camp and ride it out overnight. The next day there's a foot of snow on the ground the skies are clear and it's COLD!. Aside from getting the campfire going and making some coffee you should be thinking about jetting again! Cold air is dense air and dense air requires bigger jets. If the 240 jet ran good the day before you will need a bigger jet to run properly today. If the temperature is 50 degrees colder,,

Nov 10, 2008 | 2002 CCM 604 DS Dual Sport

Not finding what you are looking for?
Frigidaire FGQ1442ES Gas Dryer Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...