Question about RCA Televison & Video

1 Answer

Hd52w67. Will not turn on. Have read some fixya responses. Q1: is there a reset button? Q2: any suggestions?

Posted by on

  • jfbusbee Apr 09, 2011

    Thanks for all of the input. We will try this and see what happens


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

Is there any power indicator lit on the panel of your TV ?If no then the power supply is totally dead.You can take out the power supply board and have it repair or you can rep[lace the whole power supply board It is available online at shoppejimmy .com here's the link
browse your model,brand and part no.

usually the faulty in a power supply board are the regulators they are mounted on the board with heatsink use a multimeter to test them set the multimeter to a resistance reading.measure each pin all pins must not have a reverse reading .in forward bias they have a reading when reverse it should read zero means the part is good.measure also the resistors near the regulators they are measured in resistance if measured open resistor is bad with resistance,it is good.resolder all the components at the power supply board cold solder often cause this problem...
NOTE:be sure to unplug the TV before performing the repair...

good luck!Let me know how it goes...

Posted on Apr 09, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Xbox 360 q1 and q2 lights going red

i dont now because my xbox 360 do the same thang

Apr 21, 2010 | Microsoft Xbox 360 Console

1 Answer

Window set up for box plot

Use the Zoom button and select 9:ZoomStat. Window will be restricted to your data.
Suggestion: You can use two lists. L1 for the values, and L2 for the frequency. I see many duplicate values: 6 values 23. On the same line as 23 in L1, put 6 in L2
Before entering the frequencies in L2, you may want to sort the L1 list. It would look more orderly.

Other advice (forgive me if you already know). To obtain the median, Q1, Q3 use the [TRACE] button, then use left/right arrow. Screen will display the values for Med, Q1, Q2, Minx, MaxX.
Hope it helps.

Nov 11, 2009 | Office Equipment & Supplies

1 Answer

I need 4 digit ''input''code a 1990 VS-4501R big screen mitsubishi.

If you have the original remote or at least one with a QV button on your remote it is easy.
When prompted for the code, Just hold down the "QV" and the number 9 together for a bit.
That will unlock the set.
I would then go the the main menu and unlock the set from the menu. Use the "QV" and 9 to get in and turn off the password.

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up)
Please Note: If you can not rate this post with the highest rating, then please do not leave any rating. I am doing this for free and I do not think that any rating other that the best is needed.
If you need further assistance please comment to this post and I will try to help you further.

Aug 07, 2009 | Televison & Video

1 Answer

I have a sportsart 6300 that keeps blowing up Q2 and Q3

The bridge rectifier is shorted with gives Q1 and Q2 the appearance of being shorted and blowing the 15 amp ceramic fuse

Jul 12, 2009 | Sportsart 6300 Treadmill

1 Answer

Amana sxde25j high voltage board blown..

hi there,

you can try to this store to order the parts to be replaced part number & description was also indicated in HERE.

just let me know, for further assistance,

Apr 21, 2009 | Amana Easy Reach AFD2535DE Bottom Freezer...

2 Answers

How do you transfer datacasts into your EmoDio?

You can only get datacasts from the EmoDio service - Samsung has provided an online step-by-step guide to using the EmoDio service to get datacasts at the following link (requires that you register your product as part of the process, so have your serial number ready):

-Tha Mp3 Doctor

Feb 14, 2009 | Samsung Q1 Ultra MP3 Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides