Question about Panasonic NN-S541 Microwave Oven

1 Answer

How do i change the light bulb? Panasonic model NN-T945SF

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 6,993 Answers

Hi,

Do you mean you want to replace light bulb for your microwave? If yes follow the instructions below;

  1. PLEASE UNPLUG YOUR MICROWAVE!
  2. Picture of your microwave with a phone or camera so that you don't forget how to assemble it back.
  3. Remove the two screws that holds grill. They are located at the edge of the unit. Once the screws are out, rotate the grill forward from the top. It will pop right out.
  4. Once the screws are out, rotate the grill forward from the top. The grill should pop right out.
  5. Locate a small access cavity on the left.
  6. Remove the screw that is located near the front of the microwave door.
  7. Lift up the sheet metal floor to access the bulb. The bulb is located under the sheet metal "floor" on the left.
  8. Place a flash light on the microwave floor and shine the light in the light area. This will help you see better when you replace your bulb.
  9. Look for a small shiny reflector that hides the bulb. Use your two fingers to squeeze it a bit. Making sure not to bend it.
  10. The bulb connection should come right out.
  11. After you replaced the bulb, re secure the reflector and the sheet metal floor with the single screw. Test the bulb by plugging in your microwave.
  12. Once you see that the bulb works. Unplug your microwave again and re attach the front grill. You are now done.
I hope this helps to solve your problem.

Good luck.

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace light bulb in Panasonic microwave model NN-S446BA.


Here is the free online manual, but I did not see the light bulb change on my first look through: https://www.manualslib.com/manual/192230/Panasonic-Nn-S446ba.html?page=2#manual

There is a YouTube educational video that may help more: https://www.youtube.com/watch?v=sLidbz2LUtg

I hope this helps you out!

Apr 09, 2017 | Panasonic Microwave Ovens

1 Answer

Turntable for microwave model#nnt945sfx


The cooking tray and roller for the NNT945SFX are available from Panasonic on the microwave's product page under the accessories tab. See http://shop.panasonic.com/support-only/NN-T945SF.html .

The parts list from Partstore.com is fairly complete: https://www.partstore.com/Model/Matsushita/Panasonic/NNT945SFX.aspx . The cooking tray for the NNT945SFX is part number F06014M00AP. It is available here: https://www.partstore.com/Part/Matsushita/Panasonic/NNT945SFX/Matsushita/Panasonic/F06014M00AP/New.aspx . The roller that goes under the glass tray is part F290D9330AP. That is available here: https://www.partstore.com/Part/Matsushita/Panasonic/NNT945SFX/Matsushita/Panasonic/F290D9330AP/New.aspx . The motor to run the turntable is available as well.

I hope this helps. Other vendors will have the tray and roller as well.

Cindy Wells

Nov 30, 2016 | Panasonic Microwave Ovens

1 Answer

NN-T945SFX CODE H98 RUNS A FEW SECONDS THEN STOPS


There are a number of possible causes.

The following link will take you to a page with the diagnostic flow chart that you can use to troubleshoot this issue:
Microwave Fault Codes

This customers review of that issue may also be of some help:
Customer Reviews Panasonic NN T945SF 2 2 Cubic Foot 1250 Watt Microwave...

Dec 24, 2014 | Panasonic Pansonic microwave

1 Answer

Why my microwave NN GD371M will run for 4 seconds then shut off. display shows code h97?


There are a number of possible causes.

The following link will take you to a page with the diagnostic flow chart that you can use to troubleshoot this issue:
Microwave Fault Codes

This customers review of that issue may also be of some help:
Customer Reviews Panasonic NN T945SF 2 2 Cubic Foot 1250 Watt Microwave...

Jun 17, 2014 | Panasonic NN-T990SA Microwave Oven

1 Answer

Code on screen H-98 wont run


www.panasonic.com/.../troubleshooting-failure-co

Jun 16, 2014 | Panasonic NN-T945SF Stainless Steel 2.2...

1 Answer

Change light bulb panasonic inverter nn-h965bf


We recommend you have an authorized service center location replace the light bulb. Authorized service centers can be found in the below link.

www.panasonic.com/repair
Welcome to Panasonic Online Repair

Mar 23, 2014 | Panasonic NNH965BF Microwave Oven

1 Answer

My panasonic NN-T945SF starts, runs for a few seconds and then shuts off. And I smell rubber burning.


It may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sep 07, 2009 | Panasonic NN-P794SF Microwave Oven

1 Answer

Replacement light bulb for Panasonic NN-9853 Microwave


Hello, I also have a Panasonic Microwave ( model NN-S 564 or 574 ?) They are very similar.
I have just removed the outer cover 5 screws ( unplug of course ) and have located the bulb holder which is a white plastic component with two clips holding the globe, pull it out and remove the two spade clips connected to the globe. The globe will come away attached to a black plastic mount. Next........do the run around to find someone who sells it.
Perth has an authorized distributer/repairer in Myaree whose details I got from Panasonic. He may sell them. otherwise I will try a couple of specialist light globe suppliers I know....PROLAMPS in Belmont and one in BALCATTA whose name escapes me but I have been there before...Hope this helps others.

Martin

May 10, 2009 | Panasonic NN-S540 Microwave Oven

1 Answer

Panasonic NN-H664 1200 Watts Microwave


Manufacturers used to include access panels in the rear or side so you could easily change the bulb. That exposed the customer to 110V connectors, and that posed a real liability threat, so they stopped using them.

You now must generally remove the outer cover to replace the bulb.

In many over-the-range models, that can mean having to take the oven down from the wall! For safety's sake, that should be a two-person job.

It's really helpful if you have your original installation instructions to do this.

Many models use one halogen lamp to illuminate the cooktop and another to illuminate the cavity. You must not touch them with your bare skin as the oils will shorten the bulb life.

To order Panasonic parts see http://www.pasc.panasonic.com/epartr ; To download a Panasonic manual see
http://service.us.panasonic.com/operman ; to find an authorized Panasonic servicer, see
http://www.pasc.panasonic.com/WhereTo/FindServicer.asp?Pass=1 ; For FAQs, see http://service.us.panasonic.com/faq/faq.aspx

We appreciate your thoughtful rating of our answer.

Nov 17, 2007 | Panasonic NN-H664 Microwave Oven

Not finding what you are looking for?
Panasonic NN-S541 Microwave Oven Logo

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...