Question about Siemens SpeedStream 2624 (SS2624) Wireless Router

2 Answers

I HAVE SPEEDSTREAM 6520 AND WANT TO CHANGE MY WIFI PASSWORD BUT THE PROBLEM IS I LOST MY ADMIN PASSWORD IT IS ASKING WHN I WANT TO CONFIGURE HOW DO I GET MY PASSWORD BAC AND GO FURTHER WITH MY CONFIGURING OF THE ROUTER.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

The only way to get in to the router without password is to reset it to factory reset. RESET will bring all the settings back to what it was when you got it out of the box. Any custom settings will be lost and you will need to input them back in to settings (like your wireless network name or SSID, password and any open ports). Reset is done by pushing is little reset button (little round hole) that is usually on the back of the router and most times it says reset or it is different color than color of the router. You can use a pen or little screw driver but make sure not to press too had so you don't damage it. Router needs to be on and then when you push in the reset you need to hold it in for 30 seconds (make sure it is 30 per clock not just your count to make sure it worked). Once time is up just remove the pen or what ever you used and you can now log in to your router with default user name and password. This is probably on the paperwork you got with the router. If you don't have it just Google your model and most times you can find it there. If not you might have to call support and just ask them. Hope this helps.

Posted on Apr 09, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

By default the username for your Siemens Speedstream-2624 router is blank and the password is speedstream or username is admin and password leave blank

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wifi from speedstream 6520 no or low signal


You may try to use the modem to another pc just to check if the modem is defective or not. If in case the same thing you may want to reboot the modem by pressing on the power button for 5 seconds and wait for a minute beforer turning it on again. If it doesnt work you may also hard reset the modem by following the steps below.

Locate the reset button on the bottom of the 6520 and while holding the reset button watch the power light when it flashes red release it. then you can go to the config utility 192.168.2.1 , you can then configure the 6520 with your aliant UN and PW info. you will know it has connected when the internet light comes on solid green.

You may check now if the same thing happen to your wifi connection. Unless it is an ISP issue.

Mar 10, 2011 | Siemens Computers & Internet

1 Answer

Systempassword change required for siemens Gigaset 504AU


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on system menu and change admin password then save settings and restart router Let me know if you need further assistance. Thanks for using FixYa.

Sep 08, 2010 | Siemens Efficient Networks SpeedStream...

1 Answer

I need to retrieve my password on the Speedstream 6520 Router so I can log in wireless with my iphone.


not possible to retrieve a password! that's why they are secure... if you have your ISP ADSL setup details you can reset the router to factory default and reprogram it from scratch, or call their help desk BEFORE you do it and ask them to email you the connection details before you start. then WRITE the password on a label and stick it to the router.

Mar 25, 2010 | Siemens SpeedStream 2624 (SS2624) Wireless...

1 Answer

I need the driver download, i've lost my disk.


Can you please tell me is it a router or Ethernet card. If it's router I think no need the driver. Just connect the router to you PC in default network configuration. and type http://192.168.254.254 and press Enter. put Admin as default admin user name and Admin as default administrative password. then setup the necessary configuration.

For further please be with us.

Good Luck

Nov 30, 2009 | Siemens SpeedStream 4200 (13A4200001)...

3 Answers

Need to find out the password to get onto the speedstream we did not get a password when it was set up for us


You don't mention what model Speedstream you have. Assuming the installer left the default admin password on it, you can refer to http://www.routerpasswords.com to find out what that default password is. For most (but not all) models of Speedstream, the user ID is admin, and the password is admin. If the installer did not leave the default password on it, there's no way to find out what it is short of actually asking him.

Nov 17, 2009 | Computers & Internet

1 Answer

Hello - anyone there?


1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL
3. Enter the router setup login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WAP2
7. For further secutity measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable and the computers should be able to connect to the router.

Sep 28, 2009 | Siemens SpeedStream 2624 Router...

1 Answer

How do i make my speedstream 6520 wireless?


"If your PC has not been connected to a broadband modem or other network device, you will need to
perform the PC configuration procedure below. Remember to restart each PC when finished. If your
PC has been connected to a broadband modem or other network device, continue to the “Using the
Wireless Connection” section below.
1. Start your Web browser. In the Address box, enter the following: »speedstream.
2. Press Enter. The SpeedStream Simple Setup Wizard will launch.
3. When prompted, enter the Internet connection information provided by your
Internet Service Provider.
4. At the end of the Setup Wizard, you will be given the option to either connect to
the Internet or further configure the optional settings of the gateway.
5. If additional configuration is desired, select the icon for the service or option
you wish to configure: the gateway’s firewall and security settings, User
Profiles and content filtering, or home network options."

"Using the Wireless Connection
By default, the SpeedStream® Gateway is configured to work
seamlessly with other SpeedStream® wireless products. The default
wireless interface settings are:
SSID: SpeedStream
Channel: 11
Mismatched wireless settings will prevent successful
wireless network connections between devices, so
you may need to reconfigure some wireless settings
to ensure that all settings match between wireless
devices if you are:
a) Using another manufacturer’s wireless products
b) Adding the SpeedStream® Gateway to an existing
wireless network
The Setup Wizard will walk you through setting up wireless settings."

Jun 14, 2009 | Computers & Internet

1 Answer

Need IP change on gateway


  1. Log into the router's admin console. (Often http://192.168.1.1/)
  2. Release the IP address. (Method varies by router manufacturer)
  3. Turn off router, ethernet hubs/switches, and the cable/DSL modem.
  4. Leave off overnight.
  5. Turn everything back on.

Dec 13, 2008 | Computers & Internet

2 Answers

Speedstream 6520 wireless router


log into the firmware by the following steps
1 open browser and type 192.168.2.1
2 goto advanced
3 user name and password should be admin and admin
4 click on home networking modem
5 click on reboot
6 click on reset to factory defaults
7 click reboot
once rebooted repeat step 1 this time it will ask about setting it up make sure to select router only configuration
reboot modem and setup wireless cinfiguration

Feb 23, 2008 | Computers & Internet

2 Answers

Speedstream 4200 setup


I have just set up 4200 with dsl - you may find that you need to reset modem before you can configure. I was told that you need either a grey or yellow cable from your laptop to the modem. I use 10.0.0.138 to access modem. The 4200 I have was from a bigpond a/c - originally configured accordingly.
Regards,
Richard

Nov 12, 2007 | Siemens SpeedStream Modem (4100) (SS4100)

Not finding what you are looking for?
Siemens SpeedStream 2624 (SS2624) Wireless Router Logo

1,325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

john smith

Level 2 Expert

382 Answers

Are you a Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...