The radio channels is on the odds channels like 91.1 and i need to change it to the evens channels like 91.2 how do i do that in the mp238 thanks

RDU4100 Two way Radio I hope you can locate some information you need Parker. If not, let us know. Have a blessed day. Thank you.

if you have a factory radio, then chance are you antenna is amplified (even if you don't have an antenna that goes up in the back). The fuse for the antenna amplifier could have blown or the amplifier itself my have gone bad. It could also be your radio but, i would check those things first... Just a side note: i don't know of any stations that around me that aren't odd numbers 92.3 fm,95.5 fm,100.3 fm. Where you able to tune it to 100 fm before?

As far as I nkow, you need to contact Kenwood with the radio serial number to get the unlock code. In the past, they would not give it to you without giving them a special code from a card that came inside the package. You can always try though, give them a call, the number is on their website.

you need 2 remove your radio and open you shloud change the ic for frequency to work it is very easy to change it if youneed ana help contact me

Some radios have the option to adjust sensibility when scanning the frequency, check in your owners manual if your radio have that option. If you can't find that there or if you don't have it let me know about the brand and model.

Dear Annan,

I'm facing the same propblem with my Trial Blazer 2006 LT, I'm living in Saudi Arabia, and I cant receive any arabic channals.

Please let me know if you had a solution.

Regards;

Tarek Barham

00966 56 11 98 218

There should be a reset button on the unit. That would probably be the first thing I would look at.

Click HERE for your owner manual

http://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/#_

Try the old RCA/GE channels of 90/91 or 92 to get to the inputs. Or try entering channel 00. Let me know if that works.