Question about HP LaserJet 1320 Printer

2 Answers

Blank pages The printer just prints blank pages. I changed to a new cartridge, same result. Any ideas?

Posted by on

  • Anonymous Sep 09, 2008

    blank pages

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Please dont be offended by how simple this sounds. But I have seen this happen numerous times.
Was the original cartridge empty? (could be) Did you accidentally mix up the old and new cartridges and possibly reinstall the old one? Did you remove the pull tab on the new cartridge? Like I said, dont be offended, but you wouldnt believe how many times I have found that my customers have done this.

Posted on Sep 24, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 48 Answers

Sure..

try a test page first, from front panel.

get new drivers from www.hp.com

remove old ones first

install new ones


Also, more printer resources are here

Posted on Aug 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot print 4521f


cartridge inserted poriton ( fuser unit bottom portion ) you can see a small "L" shadped liver fixed with a screw, removed that from there and try with new cartridge.

Jan 15, 2014 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Printer prints blank pages


This is almost certainly an issue with the toner cartridge. I would recommend running off 30 or so prints and contacting whoever the cartridge was purchased from if the toner doesn't pull through.

Nov 18, 2012 | Brother HL 2140 Laser Printer

1 Answer

Have tried printing from computer and tried printing test page from printer. both times the pages come out blank.. how do I check the toner levels in printer. thank you


The draw back of inkjet technology printers are, if it is not using quite long period of time,cartridge nozzles will dry up, result printer will act just like a printing some thing but nothing will come on paper(blank page) even ink levels are showing full.
Try to recover the both cartridges through 'clean print cartridge' process from the system,if not better consult cartridge re-filler to clean the nozzles..Replace new cartridges if above said methods are not worked out.

Nov 10, 2012 | HP PhotoSmart 7760 InkJet Printer

1 Answer

A Lexmark E250dn in my school does not print. There is a new ink cartridge in it and it "talks" to the computer but does not show what was sent to print. The motors runs paper through it, but the paper...


This likely to be a faulty cartridge.

There are a number of things that can result in blank pages, but if the cartridge has just been changed (and the old one was fine apart from being 'empty'), you should be talking to your supplier.

Apr 23, 2010 | Lexmark E250dn Laser Printer

1 Answer

Printer prints only blank pages


Have you try to change your cartridge. Some times when you refill your cartridge, the flow of ink do not work properly. Try to change your both cartridge and then try

Sep 19, 2007 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

My Epson C84 only prints blank pages.


The generic cartridge may have damaged the printhead. This means either service or replacement. I suggest contacting Epson to see if they have any reduced prices on replacement units - I suggest the C88+

Jan 30, 2007 | Epson C84N Printer

5 Answers

HP Laserjet 1020 - prints blank documents


in my printer the resistor R348 on the motherboard printer was broken. The value that must have is 10 ohms. I have changed and the printer has resumed work.

9153e48.jpg

Dec 05, 2006 | HP LaserJet 1020 Printer

Not finding what you are looking for?
HP LaserJet 1320 Printer Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...