Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

I have a sony TV model KV-28ls36u, the problem was, when power is turned-ON, the LED blinks 11 times, what would be the best solution for this and where can I get a service Manual. Please help. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 123 Answers

Usually after 4 or 5 yrs EHT ( transformer that supplies voltage to tube ) becomes weak - then TV won't get ON.. means no picture no sound but LED blinks - in some TVs along with EHT 1 or 2 components like resistor, transistors, etc will also gets deffective - so solution is TV circuit board has to be checked to find whether only EHT is deffective or other components are also deffective - price of EHT will be between Rs.250 to Rs.600 - iam service engineer (computers, laptops, printers,etc) - bangalore - domlur - 09986222774 - sathyavijayasarathibabu@ymail.com - if you are in bangalore then you can call me for service

Posted on Apr 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony tv model KV-HA21M80 is having problem front stand by L.E.D is blinking 4 times and stopping


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Electro help

Jan 14, 2015 | Sony Televison & Video

2 Answers

Sony Triniton TV KV 32FS120 will not turn on


In standby mode (red led on/after the led stops from blinking), press "Display", "5", Volume (-)", "Power on" on the remote control in sequence, self diagnostic screen will be display, let me know the what is on the screen to diagnose where the fault came from.

Nov 25, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

I have sony 29'' crt tv . model no KV-DZM61 .when the tv statrs on it shows green led,and after few second the led glows red and it blinked for 2 times .then the tv goes in stand by mode


2 blinks means - over current protection (OCP) , unit goes to the standby
mode then displays the 2 blink fault. Could be a short in the power supply of
any of the circuits.

Jun 23, 2011 | Sony KV-XR29M61 TV

1 Answer

Sony FD Trinitron WEGA Tv - LAMP blinking 11 times


Sony tv has self protection program. The red Led blinking light indicate the probable cause location. For this model it is either 2,4 or 5 flashes every 3 second. Please check the blinking again

Feb 09, 2010 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Standby/Timer LED blinking


These unit are famous for the PCB Print to be cracked around the HV Circuit and or the Horizontal Drive Transformer pins needing to be resoldered. It can turn into a very Major repair if the HV Components short. In that case the Power Supply will also short out.
Hope this helps
Skyassoc

Jul 04, 2009 | Sony KV-32S42 32" TV

1 Answer

TV won't turn on, standby LED starts blinking


HI, this is the result of an unstable power sector in this unit. the fly back is malfunctioning and, you will need to replace it asap. i will list the part number below and a link to a site as well. you can purchase this part on-line if you wish.

FBT ASSY NX-4521//X4
Sony Part Number: 1-453-310-11

CLICK HERE TO ORDER

Jun 21, 2009 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Sony FD Trinitron WEGA KV-30XBR910 30" TV Led flashing


6 blinks meens no horizontal and no raster check capasitor c515/c516/ jungle IC and IC206.
regards,
daniel.

Dec 28, 2008 | Sony FD Trinitron WEGA KV-30XBR910 30" TV

3 Answers

Sony FD Trinitron WEGA KV 32FS120


Hiii...
I'm not certainly sure how many time the led blinking ?

I hope hear from tou soon...

Thank's

[Vrya]
be_cek@yahoo.com

Feb 23, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony wega model: kv-32FS120 doesn't turn on


Check your power supply board and resolder the pcb, check the switching diodes and zeners.

Jan 30, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Sony tv no pic or sound


Sony error codes usually only go up to 7. If the LED blinks 11 times, this usually indicates that either the clock or data line is shorted and this needs to be serviced by someone with experience with Sony sets.

Jun 28, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...